Search results for "RAMAN"
showing 10 items of 1328 documents
Light absorption and electrical transport in Si:O alloys for photovoltaics
2010
Thin films (100-500 nm) of the Si:O alloy have been systematically characterized in the optical absorption and electrical transport behavior, by varying the Si content from 43 up to 100 at. %. Magnetron sputtering or plasma enhanced chemical vapor deposition have been used for the Si:O alloy deposition, followed by annealing up to 1250 °C. Boron implantation (30 keV, 3-30× 1014 B/cm2) on selected samples was performed to vary the electrical sheet resistance measured by the four-point collinear probe method. Transmittance and reflectance spectra have been extracted and combined to estimate the absorption spectra and the optical band gap, by means of the Tauc analysis. Raman spectroscopy was …
Raman Spectroscopic Fingerprints of Atomically Precise Ligand Protected Noble Metal Clusters: Au 38 (PET) 24 and Au 38− x Ag x (PET) 24
2021
Distinct Raman spectroscopic signatures of the metal core of atomically precise, ligand-protected noble metal nanoclusters are reported using Au38 (PET)24 and Au38- x Agx (PET)24 (PET = 2-phenylethanethiolate, -SC2 H4 C6 H5 ) as model systems. The fingerprint Raman features (occurring <200 cm-1 ) of these clusters arise due to the vibrations involving metal atoms of their Au23 or Au23- x Agx cores. A distinct core breathing vibrational mode of the Au23 core has been observed at 90 cm-1 . Whereas the breathing mode shifts to higher frequencies with increasing Ag content of the cluster, the vibrational signatures due to the outer metal-ligand staple motifs (between 200 and 500 cm-1 ) do not s…
Synthesis and characterization of GaN/ReS2, ZnS/ReS2 and ZnO/ReS2 core/shell nanowire heterostructures
2020
This research was funded by the ERDF project “Smart Metal Oxide Nanocoatings and HIPIMS Technology”, project number: 1.1.1.1/18/A/073. Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART².
A comprehensive study of structure and properties of nanocrystalline zinc peroxide
2022
Abstract Nanocrystalline zinc peroxide (nano-ZnO2) was synthesized through a hydrothermal process and comprehensively studied using several experimental techniques. Its crystal structure was characterized by X-ray diffraction, and the average crystallite size of 22 nm was estimated by Rietveld refinement. The temperature-dependent local environment around zinc atoms was reconstructed using reverse Monte Carlo (RMC) analysis from the Zn K-edge X-ray absorption spectra. The indirect band gap of about 4.6 eV was found using optical absorption spectroscopy. Lattice dynamics of nano-ZnO2 was studied by infrared and Raman spectroscopy. In situ Raman measurements indicate the stability of nano-ZnO…
Influence of laser–target interaction regime on composition and properties of surface layers grown by laser treatment of Ti plates
2009
Surface laser treatment of commercially pure titanium plates was performed in air using two different Nd : YAG sources delivering pulses of 5 and 35 ns. The laser fluence conditions were set to obtain with each source either yellow or blue surface layers. Nuclear reaction analysis (NRA) was used to quantify the amount of light elements in the formed layers. Titanium oxinitrides, containing different amounts of oxygen and nitrogen, were mainly found, except in the case of long pulses and high laser fluence, which led to the growth of titanium dioxide. The structure of the layers was studied by x-ray diffraction and Raman spectroscopy. In addition, reflectance spectra showed the transition fr…
Non-radiative recombination centres in catalyst-free ZnO nanorods grown by atmospheric-metal organic chemical vapour deposition
2013
We have investigated the cathodoluminescence (CL) emission and the Raman spectra along individual ZnO nanorods grown by a catalyst-free method. The spatial correlation between the CL emission and the defect related Raman modes permits establishing a correspondence between the non-radiative recombination centres (NRRCs) and the defects responsible for the 275 cm−1 Raman band. According to this relation, the NRRCs in these nanorods are tentatively associated with complexes of zinc interstitials.
The methane Raman spectrum from 1200 to 5500 cm(-1): A first step toward temperature diagnostic using methane as a probe molecule in combustion syste…
2005
International audience; We present a study of the spontaneous Raman spectra of (CH4)-C-12 from 1200 to 5500 cm(-1) at various temperatures. This study is of interest from a fundamental as well as from a practical point of view with regards to the temperature diagnostic in hydrocarbon combustion. The present investigation shows that the spontaneous (CH4)-C-12 Raman spectra are very sensitive to temperature and that the complexity of methane spectra is not an obstacle to use methane as a probe molecule in laser-diagnostic techniques. Our study consists in determining the polarisability parameters of methane (CH4)-C-12, unknown at the present time, from spontaneous Raman spectra recorded at pr…
Composition and Color of Maya Blue: Reexamination of Literature Data Based On the Dehydroindigo Model
2019
[EN] An analysis of literature data studying the composition and color of Maya blue (MB) type materials prepared from indigo, dehydroindigo, and different aluminosilicates, accompanied by new spectral data, is presented. After thermal treatment at above 100 degrees C, indigo-based specimens displayed Raman and UV-vis spectroscopic features common to those of equivalent dehydroindigo-based replicants, thus supporting the socalled dehydroindigo model (J. Phys. Chem. B 2006, 110, 6027-6039) in which the dehydroindigo/indigo ratio, increasing with temperature, is crucial to determine the color of MB and its variability. The current analysis supports the view of MB as a polyfunctional hybrid mat…
Raman imaging and spectroscopy of heterogeneous individual carbon nanotubes
2003
Isolated single-walled carbon nanotubes (CNTs) were grown by chemical vapor deposition methods on Fe/Mo/Al2O3 catalysts, which were patterned by microcontact printing. The pattern allowed us to trace back and investigate the same isolated CNT by atomic-force (AFM) and confocal Raman microscopy with different excitation wavelengths. A change of the Raman intensity could be correlated with structural defects revealing that the molecular structure of the tubes is changing along the tube axis. By investigating the same tube segments with different excitation energies, we found that the D-line of isolated tubes shows a strong dispersive effect of 45−50 cm-1/eV. In contrast, the spectral position…
XRD and micro Raman characterization of epitaxial Bi-2201, Bi-2212 and Bi-2223 thin films
1997
Copyright (c) 1997 Elsevier Science B.V. All rights reserved. Micro Raman characterization is performed on high quality thin films of Bi 2 Sr 2 CuO 6+x (2201), Bi 2 Sr 2 CaCu 2 O 8+x (2212), Bi 2 Sr 2 Ca 2 Cu 3 O 10+x (2223) made by dc-sputtering. Single crystal X-ray measurements reveal the full epitaxy of the films, which allows for polarized Raman spectra to be obtained.