Search results for "RAMAN"
showing 10 items of 1328 documents
Electrical conductivity properties of expanded graphite-polycarbonatediol polyurethane composites
2014
Conductive polymer composites of segmented polycarbonatediol polyurethane and expanded graphite (EG) have been synthesized with different amounts of EG conductive filler (from 0 to 50 wt%). SEM, X-ray diffraction measurements, Fourier transform infrared and Raman spectroscopies demonstrated a homogeneous dispersion of the EG filler in the matrix. The dielectric permittivity of the composites showed an insulator to conductor percolation transition with increase in EG content. Significant changes in the dielectric permittivity take place when the weight fraction of EG is in the range 20–30 wt%. Special attention has been paid to the dependence of the conductivity on frequency, temperature and…
A one-pot method to enhance dissolution rate of low solubility drug molecules using dispersion polymerization in supercritical carbon dioxide
2009
The surfactant assisted polymerization of 1-vinyl-2-pyrrolidone in supercritical carbon dioxide in the presence of Piroxicam, selected as a model of a low aqueous solubility drug, was studied in order to prepare in a single step a polymeric composite to enhance the rate of dissolution of the pharmaceutical compound. Reactive entrapping was carried out at 65 degrees C in the P range 21-38MPa. Under proper operative conditions we obtained the composite under the form of sub-micron spherical particles with relatively narrow particle size distribution. Drug loadings higher than 12% (w/w) were obtained and XRD and Raman spectroscopy suggest that the anti-inflammatory agent is dispersed in the ma…
Fluorescent Carbon Nanodots as Sensors of Toxic Metal Ions and Pesticides
2021
Carbon nanodots (CDs) are a new class of fluorescent carbon-based nanomaterials characterized by a plethora of morphologies and sizes. Among these, we can include two different types of CDs, namely, graphitic and diamond-like. This wide range of structures opens up the possibility to design different CDs, with tunable optical properties accordingly to the synthesis method and precursors used. We prepared two different CDs following a bottom-up approach by thermally induced decomposition of organic precursors (namely, citric acid and urea in different molar ratios), and using purification by Size Exclusion Chromatography (SEC). Obtained CDs were characterized by Raman, absorption and fluores…
Raman-assisted parametric frequency conversion in a normally dispersive single-mode fiber
1999
International audience; We demonstrate efficient frequency conversion with large frequency shifts of an anti-Stokes signal into a parametrically seeded Stokes idler, which is generated by a highly mismatched three-wave mixing interaction and subsequent Raman amplification in a normally dispersive single-mode fiber. The use of non-phase-matched waves in Raman-assisted three-wave mixing interactions overcomes the strict spectral limitations imposed by phase-matching conditions in parametric frequency-conversion processes.
A Raman spectroscopy study of the oxidation processes in synthetic chromite FeCr2O4
2020
Abstract A crystal of synthetic chromite FeCr2O4 has been annealed in air at 700 °C for 50 days at room pressure in order to study physical-chemical changes. After the annealing treatment, Scanning Electron Microscopy (SEM) images of the polished surface of the sample showed areas of different composition. Detailed Raman mapping revealed that the annealed chromite undergoes an oxidation process, proceeding inwards from the outer surface and leading to the transformation of chromite to magnetite, and ultimately to hematite. The oxidation process also leads to the formation of trellis-like lines, arguably via stress-related mechanisms associated with the phase transformation and consequent vo…
Liquid phase exfoliation of antimonene: systematic optimization, characterization and electrocatalytic properties
2019
Antimonene, a novel group 15 two-dimensional material, is attracting great attention due to its outstanding physical and chemical properties. Despite its thermodynamic stability, the pronounced covalent character of the interlayer interactions imposes severe limitations on its exfoliation into mono- and few-layer. Here, we develop a systematic study of liquid phase exfoliation (LPE) with the aim to optimize antimonene production in terms of concentration and dimensional anisotropy, investigating the most relevant experimental factors affecting the exfoliation: pre-processing of pristine antimony, solvent selection based on Hansen solubility parameters and ultrasound conditions. Moreover, ex…
Electrodeposition of supported gadolinium-doped ceria solid solution nanowires
2012
Gadolinium-ceria solid solution nanowires with tunable composition have been prepared through template cathodic electrodeposition from solutions containing Ce 3+Gd 3+ in a variable ratio. The employed template is Porous Anodic Alumina because it can function as thermal resistant separator supporting the nanowires if used as ionic conductor in Solid Oxide Fuel Cell (SOFC). Scanning Electron Microscopy of the deposited nanostructures revealed that the use of ethanol as solvent and metal chloride as electrolyte allowed to prepare continuous, compact and well defined nanowires with morphological features stable even after thermal treatment. EDX compositional analysis confirms the presence of bo…
Impact of Ir modification on the durability of FeNC catalysts under start-up and shutdown cycle conditions
2022
A common problem associated with FeNC catalysts is their poor stability dominated by the carbon oxidation reaction (COR). In this work, the feasibility of stabilizing FeNC catalysts with small quantities of Ir was explored. With iridium being present, instead of COR the oxygen evolution reaction should be favored. The impact on structure and morphology was investigated by 57Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and transmission electron microscopy. The catalytic activity and durability for the oxygen reduction reaction was evaluated by rotating ring disc electrode experiments and accelerated stress tests mimicking the start-up and shutdown cycle (SS…
Evaluation of the influence of light-curing units on the degree of conversion in depth of a bulk-fill resin.
2020
Background It is known that bulk-fill have been widely studied and used by dentists in the clinic. However, the use of light-curing units that do not have the ability to adequately light-cure these materials at the appropriate depth can affect their clinical performance. The aim of this study was evaluating the influence of 5 different light curing units (LCUs) on the degree of conversion (DC) of a bulk-fill resin at depths of 0 to 4 mm and determined the effect of using 20s exposure and 40s. Material and methods Cylinders of composite were made in a stainless steel matrix (n=10). The specimens were exposed from the top surface using 5 LCUs: Valo® Cordless (VA); Radii Plus (RA); Emitter.D (…
Growth, structural and optical properties of AlGaN nanowires in the whole composition range.
2013
International audience; We report on the growth of AlxGa1-xN nanowires by plasma-assisted molecular beam epitaxy for x in the 0.3-0.8 range. Based on a combination of macro- and micro-photoluminescence, Raman spectroscopy, x-ray diffraction and scanning electron microscopy experiments, it is shown that the structural and optical properties of AlGaN NWs are governed by the presence of compositional fluctuations associated with strongly localized electronic states. A growth model is proposed, which suggests that, depending on growth temperature and metal adatom density, macroscopic composition fluctuations are mostly of kinetic origin and are directly related to the nucleation of the AlGaN na…