Search results for "REINFORCED"
showing 10 items of 236 documents
Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification
2021
In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper present…
Structural performances of pultruded GFRP emergency structures – Part 2: Full-scale experimental testing
2019
Abstract This paper presents an experimental testing of a pultruded glass fiber reinforced polymer (FRP) structure used for emergency applications continuing the discussion presented in a previous paper (part 1) where the study of the characteristics of material and elements are presented. First, the design of the composite structure and components and the evaluation of the structural behavior by means of numerical and analytical approach according to current regulatory codes are described. In this frame, the global and local response was observed according to load paths deriving from the design loads at limit states. Then, the experimental test on a full-scale 2D model is presented at diff…
A hybrid virtual–boundary element formulation for heterogeneous materials
2021
Abstract In this work, a hybrid formulation based on the conjoined use of the recently developed Virtual Element Method (VEM) and the Boundary Element Method (BEM) is proposed for the effective computational analysis of multi-region domains, representative of heterogeneous materials. VEM has been recently developed as a generalisation of the Finite Element Method (FEM) and it allows the straightforward employment of elements of general polygonal shape, maintaining a high level of accuracy. For its inherent features, it allows the use of meshes of general topology, including non-convex elements. On the other hand, BEM is an effective technique for the numerical solution of sets of boundary i…
Stochastic Tension-Stiffening Approach for the Solution of Serviceability Problems in Reinforced Concrete: Constitutive Modeling
2015
A number of studies have indicated that the tension-stiffening law is an important input parameter in a numerical analysis of serviceability (deformations and cracking) problems of reinforced concrete (RC) structures. The stochastic nature of concrete cracking, which results in a large scatter of experimental results, renders the constitutive modeling a very difficult task. Even data obtained from short-term tests are to some degree uncertain due to time-dependent processes occurring in concrete, such as shrinkage and creep relaxation. This article provides statistical analysis tools that can be readily applied to engineering practice. Stochastic principles are applied to modeling of tensio…
Simplified Model of PC Concrete Beams with Corroded Strands in Highway Viaduct: Case Study and Analytical Modeling
2021
AbstractIn this paper, several cases of failure of prestressed reinforced concrete (PC) beams of a viaduct in Italy due to cable corrosion are presented. Therefore, a simplified model to determine ...
Behavior in compression of concrete cylinders externally wrapped with basalt fibers
2015
Abstract This paper gives additional information on the use of new class of composites constituted by Basalt Fiber Reinforced Polymer (BFRP) bonded with epoxy resin to concrete specimens as an alternative confinement material for compressed concrete members with respect to carbon or glass fibers. From the experimental point of view, concrete cylinders are wrapped with continuous fibers, in the form of sheets, applying both full and partial discrete wrapping with BFRP straps, and then tested in compression. For comparison, few other concrete cylinders are wrapped with Carbon Fiber Reinforced Polymer (CFRP) sheets and tested in compression. The number and type of plies (full or partial wrappi…
Stress-Strain Law for Confined Concrete with Hardening or Softening Behavior
2013
This paper provides a new general stress-strain law for concrete confined by steel, fiber reinforced polymer (FRP), or fiber reinforced cementitious matrix (FRCM), obtained by a suitable modification of the well-known Sargin’s curve for steel confined concrete. The proposed law is able to reproduce stress-strain curve of any shape, having both hardening or softening behavior, by using a single closed-form simple algebraic expression with constant coefficients. The coefficients are defined on the basis of the stress and the tangent modulus of the confined concrete in three characteristic points of the curve, thus being related to physical meaningful parameters. It will be shown that if the v…
Prediction of the out-of-plane response of infilled frames under seismic loads by a new fiber-section macro-model
2016
This chapter suggests that an extension of the capability of the traditional inplane macro-models to capture the simultaneous in-plane and Out-Of-Plane (OOP) response of infills. A new simplified macro-model for the assessment of both in plane and out-of-plane responses of infilled frames was developed and validated. The possibility to simulate the arching action is achieved by using distributed plasticity fiber-section elements, able to directly account for the coupling between axial load and bending moment. The arching action is explicitly introduced by the use of fiber-section beam-column elements, which can model the coupling between axial-load and bending moment. The model presented is…
Biaxial deformation and ductility domains for engineered rectangular RC cross-sections: A parametric study highlighting the positive roles of axial l…
2016
Abstract Axial load and biaxial bending strongly influence the deformation capacity of column cross-sections, in most cases causing a non-negligible loss of curvature and ductility with respect to the case of pure bending along principal axes, commonly assumed as the basic condition to assess the inelastic capacity. In consideration of this the paper investigates the biaxial deformation performance of RC rectangular cross-sections belonging to one-dimensional elements, focusing on the influence of some parameters as the cross-section aspect ratio and the distribution of the rebars, as well as the mechanical characteristics of concrete and steel and the impact of biaxial/axial stresses. In t…
Modal Analysis of a Reinforced Concrete Frame in Various States of Damage
2005
The purpose of this paper is to report selected results of an experiment in which two, natural size r/c frames were put on shaking table and subjected to a sequence of seismic excitations with increasing intensity interlaced with low level, diagnostic tests. The shaking table experiment aimed at working out new methodology for monitoring vibrations of r/c structures to assess their state. Characteristic decrease of natural frequencies and increase of structural damping was observed and analyzed in detail. It was interesting to note 20 per cent drop in natural frequencies prior to visual detection of any cracks.