Search results for "Radiation"

A new equipment to measure the combined effect of humidity, temperature, mechanical stress and UV exposure on the creep behaviour of polymers

2008

To be able to study and predict the physical properties of a polymeric material under different environmental conditions is very important. Moisture, UV irradiation, thermal and mechanical stresses can dramatically change the characteristics of the material and hinder some specific applications. In this work, a new equipment able to perform creep tests under different environmental conditions (temperature, humidity, stress) is presented. Some preliminary results are also presented using a sample of polyamide 6. As this polymer is sensitive to all these variables, it is appropriate to verify the effectiveness of the new instrument.

Thermo- and photo-oxidative stability and improved processability of polyamide stabilized with a new functional additive

2005

During processing polyamides can undergo thermo-mechanical degradation due to the mechanical stress and to the high temperature applied to the melt. Degradation can occur also during the polyamides lifetime due to many driving forces, like temperature, ultraviolet radiations, etc. The mechanisms of degradation are not well understood and the stabilization with usual stabilizers, like phenol antioxidants, is not so efficient as for other classes of polymers. The aim of this work is the study of the effects of the addition of a new multifunctional additive on the processing and on the thermo- and photo-stabilization of polyamide-6. This additive is able to prevent the thermo-mechanical degrad…

Photoinduced molecular rearrangements. Some comments on the ring-photoisomerization of 1,2,4-oxadiazoles into 1,3,4-oxadiazoles

2001

The ring-photoisomerization of 3-amino- and 3-methylamino-5-phenyl-1,2,4-oxadiazoles into the corresponding 2-amino- and 2-methylamino-5-phenyl-1,3,4-oxadiazoles has been reinvestigated by examining the effect of a base on the photoreaction. On irradiating at λ = 254 nm in methanol, yields of the ring-photoisomers were found to be significantly enhanced by the addition of triethylamine (TEA) in the photoreaction medium. By contrast, irradiation of the 3-amino-5-phenyloxadiazole in acetonitrile containing TEA gave an almost complete photoreduction into benzoylguanidine, while few percent of the ring photoisomer were detected. Furthermore, the pyrene-sensitized photolysis of 3-amino-5-phenylo…

ChemInform Abstract: Photoinduced Molecular Rearrangements. Some Comments on the Ring-Photoisomerization of 1,2,4-Oxadiazoles into 1,3,4-Oxadiazoles.

2010

The ring-photoisomerization of 3-amino- and 3-methylamino-5-phenyl-1,2,4-oxadiazoles into the corresponding 2-amino- and 2-methylamino-5-phenyl-1,3,4-oxadiazoles has been reinvestigated by examining the effect of a base on the photoreaction. On irradiating at λ = 254 nm in methanol, yields of the ring-photoisomers were found to be significantly enhanced by the addition of triethylamine (TEA) in the photoreaction medium. By contrast, irradiation of the 3-amino-5-phenyloxadiazole in acetonitrile containing TEA gave an almost complete photoreduction into benzoylguanidine, while few percent of the ring photoisomer were detected. Furthermore, the pyrene-sensitized photolysis of 3-amino-5-phenylo…

Microwave-assisted synthesis of novel cyclodextrin–cucurbituril complexes

2011

Microwave irradiation was successfully used in order to obtain stable supramolecular aggregates between cyclodextrins and cucurbiturils, without the participation of any long-chain common ‘molecular thread’ guest. These aggregates were characterised by means of various different techniques, namely NMR, thermogravimetry, polarimetry and ESI-MS. Cross-analysis of experimental data allowed us to obtain insights on the stoichiometries of the composites and their thermal stabilities. The possible structures of the composites are briefly discussed, as well as the actual nature of their intrinsic stability.

Enhancing Selectivity In Photocatalytic Formation Of P-Anisaldehyde In Aqueous Suspension Under Solar Light Irradiation Via Tio2 N-Doping

2012

The photocatalytic partial oxidation of 4-methoxybenzyl alcohol to the corresponding aldehyde (p-anisaldehyde) was performed under simulated solar irradiation by using home prepared N-doped TiO2 catalysts. The photocatalysts were prepared by a sol–gel method, using TiCl4 as TiO2 precursor and NH4Cl, urea or NH4OH as N-doping sources. A commercial TiO2 (Degussa P25) was also used for comparison aims. The prepared catalysts were characterized by BET specific surface area, XRD, ESEM and UV-vis spectroscopy. The reactivity results show that (i) the doped catalysts are predominantly amorphous, and they show selectivity values far higher than those of the corresponding undoped ones and of well cr…

Optical Absorption of Zinc Selenide Doped with Cobalt (Zn1-xCoxSe) under Hydrostatic Pressure

2000

Optical absorption of the diluted magnetic semiconductor Zn 1-x Co x Se (x = 0.02) has been measured at room temperature under hydrostatic pressure up to 14 GPa in a membrane diamond-anvil cell. We found two absorption features: (i) an absorption structure in the energy range 1.5 to 1.8 eV, with a negligible pressure shift (i.e. (0.45 ± 0.05) meV/GPa) which we have identified as the Co 2+ (3d 7 ) internal transition 4 A 2 (F) → 4 T 1 (P) and (ii) an onset in the energy range 2 to 2.7 eV which redshifts with pressure (dE/dP = (-8.1 ± 0.6) meV/GPa). We have attributed such absorption edge to charge transfer between the ZnSe valence band and the Co 2+ (3d 7 ) levels. On the assumption that tho…

Fluoro heterocycles. A photochemical methodology for the synthesis of 3-amino- and 3-(N-alkylamino)-5-perfluoroalkyl-1,2,4-oxadiazoles

2000

Abstract A photochemical methodology for the synthesis of perfluoroalkyl-1,2,4-oxadiazoles has been described. 3-Amino- and 3-( N -alkylamino)-5-perfluoroalkyl-1,2,4-oxadiazoles have been prepared by irradiation of 3-perfluoroalkanoylamino-4-phenyl-1,2,5-oxadiazoles (furazans) at λ =313 nm in methanol and in the presence of ammonia or primary aliphatic amines.

1973

The mechanism of radiation-induced polymerizations in the solid state has been a subject mostly open to speculation. As radiation usually generates several kinds of active species (radicals and ions) it is difficult to find out, which of these actually causes polymerization. We have developped a method distinguishing between cationic and anionic active centers. Cationic polymerizations are terminated by addition of a base such as sodium alkoxide in a suitable solvent. The alkoxide is incorporated into the polymer as an endgroup. This endgroup is determined analytically after isolation and purification of the polymer. The incorporation of alkoxy endgroups into the polymer is a proof of the o…

Localized states in wide-gap oxide glasses

1997

Localized states manifest themselves by light absorption at the optical gap of a glass and by luminescence excited there with Stoke's shift. They are created by the minority structural motifs of one or many structural modifications in which a material can exist, and which can provide electronic states absorption at the optical gap. Their wavefunctions overlapping determine the luminescence intensity dependence on the temperature [I(T)on the order of magnitude exp(- T/T 0 )] and power law (t -1 ) of luminescence decay kinetics, which include intra-center processes due to triplet-singlet transitions and recombination processes due to a tunnel and overbarrier transitions, as well as a fast com…