Search results for "Relative"

Does Promoting Homeownership Always Damage Labour Market Performances?

2018

In this paper we analyse the link between homeownership and various aggregate and individual labour market outcomes. Our aim is to investigate the likely consequences of public policies that promote homeownership. To this end, we develop a circular firm-worker matching model with Nash-bargained wage setting and free market entry. Homeowners are assumed to be less mobile than tenants and to bear higher mobility costs. Our numerical exercises show that tenants usually have lower unemployment rates and lower wage rates than homeowners. Importantly, workersʼ performances do not necessarily improve following an increase in the proportion of homeowners. The latter crucially depends on the relativ…

Characterization of Different Cable Ferrite Materials to Reduce the Electromagnetic Noise in the 2–150 kHz Frequency Range

2018

The gap of standardization for conducted and field coupled electromagnetic interferences (EMI) in the 2–150 kHz frequency range can lead to Electromagnetic Compatibility (EMC) problems. This is caused by power systems such as Pulse Width Modulation (PWM) controlled rectifiers, photovoltaic inverters or charging battery units in electric vehicles. This is a very important frequency spectral due to interferences generated in a wide range of devices and, specifically, communication problems in the new technologies and devices incorporated to the traditional grid to convert it into a Smart Grid. Consequently, it is necessary to provide new solutions to attenuate this kind of interference, which…

Humidity-Induced Grain Boundaries in MAPbI3 Perovskite Films

2016

Methylammonium lead halide perovskites (MAPbI3) are very sensitive to humid environments. We performed in situ scanning force microscopy and in situ X-ray diffraction measurements on MAPbI3 films to track changes in the film morphology and crystal structure upon repeated exposure to a high relative humidity environment (80%). We found that the appearance of monohydrate (MAPbI3·H2O) Bragg reflections coincided with the appearance of additional grain boundaries. Prolonging the exposure time to humidity induced more grain boundaries and steps in the MAPbI3 films, and the peak intensities of the monohydrate MAPbI3·H2O increased. The monohydrate was not stable under dry atmosphere and could be r…

Dielectric and Ferroelectric Properties of Lead-Free NKN and NKN-Based Ceramics

2011

Lead-free ceramics of Na0.5K0.5NbO3 (NKN), Na0.5K0.5(Nb0.94Sb0.06)O3 (NKNS6) and Na0.5K0.5(Nb0.94Sb0.06)O3 + 0.5%MnO2 (NKNS6 + 0.5%MnO2) have been prepared by a solid phase hot pressing sintering process. X-ray diffraction results show that the obtained samples possess the perovskite structure. The micrograph of the fractured surface showed a dense structure in a good agreement with that of 91–94% relative density determined by the Archimedes method. An average grain size decreases with Sb and Mn doping (from about 20 μm for NKN to about 5 and 2 μm for NKNS6 and NKNS6 + 0.5%MnO2, respectively). Low frequency (100 Hz–200 kHz) investigations revealed the diffuse phase transitions. It was foun…

Sensing properties of assembled Bi2S3nanowire arrays

2015

Bismuth sulfide (Bi2S3) nanowires were grown in porous aluminium oxide template and a selective chemical etching was applied to transfer the nanowires to a solution. Well aligned nanowire arrays were assembled on pre-patterned silicon substrates employing dielectrophoresis. Electron beam lithography was used to connect aligned individual nanowires to the common macroelectrode. In order to evaluate the conductometric sensing performance of the Bi2S3 nanowires, current–voltage characteristics were measured at different relative humidity (RH) levels (5–80%) / argon medium. The response of the Bi2S3 nanowires depending of RH is found to be considerably different from those reported for other ty…

Relative Humidity Dependent Resistance Switching of Bi2S3Nanowires

2017

Electrical properties of Bi2S3nanowires grown using a single source precursor in anodic aluminum oxide templates are sensitive to the relative humidity in an inert gas environment. Dynamic sensing dependency is obtained and shows presence of spontaneous resistance switching effect between low and high relative humidity states. Employing the thermionic field emission theory, heights of Schottky barriers are estimated from the current-voltage characteristics and in relation to the humidity response. The change of Schottky barrier height is explained by local changes in physically adsorbed water molecules on the surface of the nanowire.

Performance Study of Split Ferrite Cores Designed for EMI Suppression on Cables

2020

The ideal procedure to start designing an electronic device is to consider the electromagnetic compatibility (EMC) from the beginning. Even so, EMC problems can appear afterward, especially when the designed system is interconnected with external devices. Thereby, electromagnetic interferences (EMIs) could be transmitted to our device from power cables that interconnect it with an external power source or are connected to another system to establish wired communication. The application of an EMI suppressor such as a sleeve core that encircles the cables is a widely used technique to attenuate EM disturbances. This contribution is focused on the characterization of a variation of this cable …

2014

NanosizedCeO2powders were synthesized via hydrothermal method with different types of surfactants (polyethylene glycol (PEG), cetyltrimethylammonium bromide (CTAB), and sodium dodecylbenzenesulfonate (SDBS)). X-ray diffraction, Raman spectroscopy, and transmission electron microscopy were utilized to characterize the phase structures and morphologies of the products. The sample with CTAB as surfactant (CeO2-C) has the largest specific surface area and the smallest particle size among these three samples. The humidity sensor fabricated byCeO2-C shows higher performance than those usedCeO2-P andCeO2-S. The impedance of theCeO2-C sensor decreases by about five orders of magnitude with relative…

From the solution processing of hydrophilic molecules to polymer-phthalocyanine hybrid materials for ammonia sensing in high humidity atmospheres.

2014

We have prepared different hybrid polymer-phthalocyanine materials by solution processing, starting from two sulfonated phthalocyanines, s-CoPc and CuTsPc, and polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), poly(acrylic acid-co-acrylamide) (PAA-AM), poly(diallyldimethylammonium chloride) (PDDA) and polyaniline (PANI) as polymers. We also studied the response to ammonia (NH3) of resistors prepared from these sensing materials. The solvent casted films, prepared from s-CoPc and PVP, PEG and PAA-AM, were highly insulating and very sensitive to the relative humidity (RH) variation. The incorporation of s-CoPc in PDDA by means of layer-by-layer (LBL) technique allowed to stabilize the fi…

A methodology to assess the effect of sweat on infrared thermography data after running: Preliminary study

2020

Abstract The aim of this technical report is to present a preliminary study carried out to define the methodology to be employed for further research on assessing the effect of sweating on infrared thermography and thermal contact sensors after moderate intensity running. Nine recreational runners participated in this preliminary study. Participants ran for 35 min (5 min warm-up and 30 min at a rate of perceived exertion rate of 12 points on the 6–20 points Borg scale). Skin temperature (infrared thermography, Flir E60bx; four thermal contact sensors, IButton DS1923 Hygrochron) and relative humidity (thermal contact sensors) were measured on the anterior thigh on both lower limbs before and…