Search results for "SCOPE"
showing 10 items of 2420 documents
Preparation, characterization and in vitro test of composites poly-lactic acid/hydroxyapatite scaffolds for bone tissue engineering.
2018
Abstract In this work, the possibility to produce composite Poly-L-lactic acid (PLLA)/Hydroxyapatite (HA) porous scaffolds via Thermally Induced Phase Separation (TIPS) for bone tissue engineering applications was investigated. Several PLLA/HA wt/wt ratios (95/5, 90/10, 70/30, 50/50, 34/66) were tested and the as-obtained scaffolds were characterized via Scanning Electron Microscopy, Wide Angle X-Ray Diffraction, Thermogravimetric analysis, Gas Pycnometry, Differential Scanning Calorimetry and mechanical compression test. Morphological analysis revealed an open structure with interconnected pores and HA particles embedded in the polymer matrix. Finally, cell cultures were carried out into t…
From Layered Molybdic Acid to Lower-Dimensional Nanostructures by Intercalation of Amines under Ambient Conditions
2006
Nanostructures of varied dimensionality such as rods, scrolls, and disks of molybdenum oxide have been synthesized in gram quantities under ambient conditions using exfoliation of the layers as a synthetic tool. Intercalation of alkylamines (CnH2n+2NH2, where n = 3, 4, 8, 12, and 16) into yellow molybdic acid (MoO3·2H2O) and subsequent treatment with nitric acid resulted in molybdenum oxide nanorods, nanodisks, or oxide−amine composite nanorods. The sizes of the nanoparticles range from a few nanometers to micrometers in length and 10 to 200 nm in diameter. Detailed X-ray, scanning electron microscopy, and transmission electron microscopy analyses reveal an inverse relation between the size…
Ceria-based electrolytes prepared by solution combustion synthesis: The role of fuel on the materials properties
2016
Ce0.8Sm0.2O2 â xpowders were synthesized by solution combustion synthesis using citric acid, cellulose and sucrose as single, or intimately mixed, fuels. The powders were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2sorption at â196 °C, H2-temperature programmed reduction and thermogravimetric analyses. Textural properties of the powders were shaped by the peculiar employed fuel. The study of reducibility revealed that oxygen vacancies formation is mainly influenced by both parameters, specific surface area and total pore volume. The different tendency toward reduction played a key role in sintering under reducing atmosphe…
A multi-analytical approach for the characterization of black crusts on the facade of an historical cathedral
2020
Abstract This study focuses on the characterization of black crusts collected from the Monza cathedral located in the homonymous city (N Italy), a hot spot from the point of view of the atmospheric pollution. Black crusts and substrate marble specimens were analyzed by a multi-analytical approach including X-ray Diffraction (XRD), Fourier Transform-Infrared spectroscopy (FT-IR), Stereomicroscopy (SM), Polarized Light Microscopy (PLM), High Resolution Scanning Electron Microscopy coupled with Energy Dispersive X-ray spectroscopy (HRSEM-EDX) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP/MS). The characterization of the carbon fraction (organic carbon, OC, and element…
Hierarchical structure and cytocompatibility of fish scales from Carassius auratus
2014
Abstract To study the structure and the cytocompatibility of fish scales from Carassius auratus , scanning electron microscopy (SEM) was used to observe the morphology of fish scales treated with different processing methods. Based on varying morphologies and components, the fish scales can be divided into three regions on the surface and three layers in vertical. The functions of these three individual layers were analyzed. SEM results show that the primary inorganic components are spherical or cubic hydroxyapatite (HA) nanoparticles. The fish scales have an ~ 60° overlapped plywood structure of lamellas in the fibrillary plate. The plywood structure consists of co-aligned type I collagen …
Synthesis and characterization of α-hopeite, Zn3(PO4)2·4H2O
1999
Orthorhombic α-Zn3(PO4)2·4H2O, α-hopeite, was synthesized from an aqueous solution of zinc acetate and orthophosphoric acid. The synthesis from these starting materials yielded best results with respect to purity and crystallinity. Structural characteristics of the compound were investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and thermogravimetric/differential thermal analysis (TG/DTA). Supplemental data came from surface area, particle size distribution, and density measurements. The obtained compound proved to be highly crystalline and stoichiometric. Dehydration of α-hopeite is accompanied by at least two endothermic effect…
Effect of halloysite nanotubes filler on polydopamine properties
2019
Abstract Hypothesis Polydopamine (PDA) is widely used as hydrophilic coating for several applications. However, most of the methods studied to improve or manipulate PDA properties are multistep and time-consuming, and there is a need for versatile strategies aimed at controlling and modifying the properties of PDA. Experiments PDA-halloysite nanocomposites were produced under different oxidation conditions in alkaline and acidic media and were characterized by UV–visible and attenuated total refraction- Fourier Transform Infrared spectroscopies, thermogravimetric analysis, porosimetry, scanning electron microscopy, X-ray diffraction and contact angle measurements against the reference PDA p…
A new approach to the synthesis of intermetallic compounds: mild synthesis of submicrometric CoxMy (M = Mo, W; x∶y = 3∶1 and 7∶6) particles by direct…
2002
A simple processing route to cobalt–molybdenum and cobalt–tungsten intermetallics (CoxMy, where M = Mo and W, and x∶y = 3∶1 and 7∶6) has been developed, on the basis of the use of precursors resulting from freeze-drying of aqueous solutions of the appropriate common metal salts. The influence of the preparative variables on the outcomes of this procedure is examined. These compounds are prepared as single phases by thermal reduction of amorphous freeze-dried powders under a hydrogen–argon atmosphere (8% H2), followed by slow cooling of the samples. The materials have been characterised by X-ray powder diffraction, metal analysis, scanning electron microscopy and thermogravimetry under an ox…
Reconsidering the accuracy of X-ray fluorescence and ion beam based methods when used to measure the thickness of ancient gildings
2017
Since at least 5000 years ago, gilding techniques have been used for decoration purposes or to make artefacts appear as made of solid gold. Investigation of ancient gildings inevitably requires measuring their thickness, which is usually done either through the observation of cross-sections or by methods such as Rutherford backscattering spectroscopy, particle-induced X-ray emission and X-ray fluorescence. Whereas the former method requires sampling, the latter ones are non-invasive and therefore preferable. These non-invasive methods, however, measure the number of atoms per unit area, which can be converted into thickness only if the density is known. So far this has not been considered a…
Cs0.86(NH41.14SO4Te(OH)6 in porous anodic alumina for micro fuel cell applications.
2011
Abstract Cs0.86(NH4)1.14SO4Te(OH)6 supported by anodic alumina membranes (AAMs) has been characterized for the first time in H2/O2 fuel cell. The fabricated membrane electrode assemblies are able to produce peak power densities in the range 15–30 mW cm−2 under mild conditions (room temperature, low humidity and low Pt loading) and show an increased durability with cycling with respect to previous results obtained with AAM-based fuel cell. The physico-chemical characterization of the electrolytes has been carried out through X-ray diffractometry, scanning electron microscopy and micro-raman analysis. An estimation of the composite membranes conductance under fuel cell operation has been carr…