Search results for "SILANE"
showing 10 items of 173 documents
An aptamer-gated silica mesoporous material for thrombin detection.
2013
An aptamer-capped mesoporous material for the selective and sensitive detection of &-thrombin in human plasma and serum has been prepared and characterised.
Improved antifouling properties and selective biofunctionalization of stainless steel by employing heterobifunctional silane-polyethylene glycol over…
2016
AbstractA straightforward solution-based method to modify the biofunctionality of stainless steel (SS) using heterobifunctional silane-polyethylene glycol (silane-PEG) overlayers is reported. Reduced nonspecific biofouling of both proteins and bacteria onto SS and further selective biofunctionalization of the modified surface were achieved. According to photoelectron spectroscopy analyses, the silane-PEGs formed less than 10 Å thick overlayers with close to 90% surface coverage and reproducible chemical compositions. Consequently, the surfaces also became more hydrophilic, and the observed non-specific biofouling of proteins was reduced by approximately 70%. In addition, the attachment of E…
Copper‐Promoted Formation of Vinylsiloxanes
2020
The metathesis reactions of chlorovinylsilanes with copper(I) oxide are reported. The process is catalyzed by HCl which can be in situ generated via hydrolysis of chlorosilanes by traces of water present in the system. An appearance of olefin/CuCl π‐intermediates can provide a stereoselectivity of the process and alter the pathway of siloxanes formation employing Cu2O as the source of oxygen. It was also shown that acetonitrile may be available as a solvent for construction of the systems with large preparative capabilities, including those based on the use atmospheric oxygen in siloxane synthesis.
Synthesis and characterization of nanoparticles with an iron oxide magnetic core and a biologically active trialkylsilylated aliphatic alkanolamine s…
2007
Water-soluble double-coated magnetic nanoparticles (NPs) containing cytotoxic decyldimethyl(β-dimethylaminoethoxy)silane methiodide (AA) molecule sorbed at biocompatible magnetic particles, which consist of magnetite pre-coated with oleic acid (OA), have been prepared. X-ray line profile broadening analysis was used for crystallite size determination. The method of magnetogranulometry has been used for determination of diameter of iron oxide magnetic core and magnetic properties of NPs prepared. In vitro cytotoxicity on monolayer tumor cell lines HT-1080 (human fibrosarcoma), MG-22A (mouse hepatoma) and normal mouse fibroblasts (NIH 3T3) has been studied. It was revealed that all the water-…
C,N-chelated diaminocarbene platinum(II) complexes derived from 3,4-diaryl-1H-pyrrol-2,5-diimines and cis-dichlorobis(isonitrile)platinum(II): Synthe…
2020
The reaction of 3,4-diaryl-1H-pyrrol-2,5-diimines with cis-dichlorobis(isonitrile)platinum(II) affords the C,N-chelated diaminocarbene platinum(II) complexes, which have been fully characterized including molecular spectroscopy, single crystal X-ray diffraction and DFT calculations. The obtained platinum(II) complexes are effective catalysts for the hydrosilylation of alkynes and alkenes. Thus, the reaction of phenylacetylene with triethoxysilane leads to the formation of α- and β-(E)-vinylsilanes, generating TON's in the range of 103 to 104 and TOF's in the range of 102 to 103 h−1. Also, the cross-linked silicones, possessing the luminescence properties, were obtained by the hydrosilylatio…
Effect of silane coupling treatment on the adhesion between polyamide and epoxy based composites reinforced with carbon fibers
2020
The increasing efforts aimed to design structures with reduced weight and better mechanical performances has led in recent years to a growing use of fiber reinforced polymer materials in several fields such as marine. However, these materials can be composed of chemically very different elements and, hence, may be difficult to joint. This research aims to improve the adhesion between a thermoplastic matrix of polyamide reinforced with short carbon fibers (PA12-CR) and a carbon fiber reinforced epoxy matrix (CFRP). Two different silane coupling agents, (3-Aminopropyl)trimethoxysilane (AM) and (3-Glycidyloxypropyl)trimethoxysilane (EP), were applied, through the spray deposition method, on th…
Effectiveness of some protective and self-cleaning treatments: a challenge for the conservation of temple G stone in Selinunte
2021
Abstract The Temple G of the Archaeological Park of Selinunte (Italy), the largest in Europe, is one of the most impressive temples in the Magna Grecia. Today, it is completely destroyed due to a strong earthquake occurred in the Middle Ages. The used stone is a calcarenite coming from the ancient and renowned quarries of Cusa near the acropolis. This work comes from the today’s proposal of Temple G anastylosis. The goal of the work is to provide the results relating the protective effectiveness of three polymer formulations, appropriately selected, on stone samples taken from the “Capitello” quarry, part of “Cusa quarries”. The formulations functionality was deployed by adding TiO2 nanopar…
Effect of surface treatments on the bond strength of CAD/CAM fiberglass posts
2018
Background There is no ideal protocol for the surface treatment of fiber posts, especially when using a computer-aided design/computer-aided manufacturing (CAD/CAM) experimental fiberglass block. The purpose of this study was to evaluate the bond strength of a CAD/CAM customized glass fiber post and core after applying different surface treatment techniques. Material and methods Forty premolars were prepared to receive a customized CAD/CAM glass-fiber post and core obtained from an experimental block of glass fiber and epoxy resin. The specimens were randomly distributed in 4 groups (n=10) according to the post and core surface treatment: ETH - 70% ethanol; HP - 24% hydrogen peroxide for 1 …
Repair bond strength of bulk fill composites after different adhesion protocols
2019
Background Repairs in composite resin restorations are common procedures in clinical practice. Many surface treatment options have been proposed to improve the adhesion between the old and new composite. The objective of this study was to evaluate the microtensile bond strength of repairs performed on aged bulk fill and conventional composites after different adhesion protocols. Material and methods First, 84 specimens (8x8x4 mm3) of a microhybrid composite and a high-viscosity bulk fill composite were prepared and aged. Afterward, they received a mechanical surface treatment by means of abrasion with a diamond bur, followed by division into six groups according to the adhesion protocol emp…
Effect of different adhesive strategies on the microtensile bond strength of dentin to indirect resin-based composite.
2020
Background To evaluate the microtensile bond strength of indirect resin composite bonded to dentin using five different adhesives strategies. Material and Methods Forty specimens (Solidex) were produced and randomly into five groups with different adhesives strategies: (G1)- Single Bond Universal + etch + silane + RelyX Ultimate, (G2)- Single Bond Universal + silane + RelyX Ultimate, (G3)- Single Bond Universal + etch + RelyX Ultimate, (G4)- Single Bond Universal + RelyX Ultimate, and (G5)-Scotchbond Multi-purpose + RelyX ARC. After cementation the specimens were stored in 100% humidity for 24hours at 37°C. The specimens were sectioned perpendicular to the adhesive interface to obtain beams…