Search results for "STING"
showing 10 items of 3756 documents
On the coupling dynamics between thermally stressed beams and granular chains
2015
The in-situ measurement of thermal stress in slender beams, or long continuous welded rails, may prevent structural anomalies. With this aim, we investigated the coupling dynamics between a beam and the highly nonlinear solitary waves propagating along a straight granular chain in contact with the beam. We hypothesized that these waves can be used to measure the stress of thermally loaded structures, or to infer the neutral temperature, i.e., the temperature at which this stress is null. We studied numerically and experimentally the mechanical interaction of one and two straight chains of spherical particles in contact with a prismatic beam that is subjected to heat. The results show that c…
Comparison of the effect of different surface treatments on the bond strength of different cements with nickel chromium metal alloy: An in vitro study
2017
Background For success of any indirect metal restoration, a strong bond between cement and the intaglio surface of metal is imperative. The aim of this study is to evaluate and compare the effect of different surface treatment on the tensile and shear bond strength of different cements with nickel–chromium alloy. Material and Methods 120 premolars were sectioned horizontally parallel to the occlusal surface to expose the dentin. Wax patterns were fabricated for individual tooth followed by casting them in nickel chromium alloy. 60 samples were tested for tensile bond strength, and the remaining 60 for shear bond strength. The samples were divided into three groups (of 20 samples each) as pe…
Ultrasonic inspection for the detection of debonding in CFRP-reinforced concrete
2017
Fibre-reinforced plastic (FRP) composites are extensively used to retrofit civil structures. However, the quality and the characteristics of the bond between the FRP and the structure are critical to ensure the efficacy of the retrofit. For this reason, effective non-destructive evaluation (NDE) methods are often necessary to assess the bonding conditions. This article presents an ultrasonic technique for detecting defects at the FRP-substrate interface. The technique uses the Akaike Information Criterion, to detect automatically the onset of the ultrasonic signals, and the novel Equivalent Time Lenght (ETL) parameter, to quantify the energy of the propagating ultrasonic signals along the i…
Influence of different parameters on drug release from hydrogel systems to a biomembrane model. Evaluation by differential scanning calorimetry techn…
2000
A comparative study on the drug release capacity of four water swellable polymeric systems was carried out by differential scanning calorimetry (DSC). The polymeric systems chosen were alpha,beta-polyaspartahydrazide (PAHy) crosslinked by glutaraldehyde (GLU) (PAHy-GLU) or by ethyleneglycoldiglycidylether (EGDGE), (PAHy-EGDGE), polyvinylalcohol (PVA) crosslinked by glutaraldehyde (PVA-GLU) and alpha,beta-poly(N-hydroxyethyl)-DL-aspartamide (PHEA) by gamma irradiation (PHEA-gamma matrices). The degree of crosslinking for PAHy-GLU, PAHy-EGDGE and PVA-GLU samples was about 0.4 and 0.8. These hydrogels were characterized as free of drugs and were loaded with diflunisal (DFN) (approximately 2.5%…
Mechanical behavior of provisional implant prosthetic abutments
2014
Introduction: Implant-supported prostheses have to overcome a major difficulty presented by the morphology and esthetics of peri-implant tissues in the anterior sector. Diverse therapeutic techniques are used for managing the mucosa adjacent to the implant and the most noteworthy is immediate/deferred fixed provisionalization. Objectives: In vitro testing of strength and deformation of implant prosthetic abutments made from different materials (Titanium/PEEK/methacrylate). Material and Methods: Forty Sweden&Martina® implant prosthetic abutments (n=40) were divided into five groups: Group MP: methacrylate provisional abutments with machined titanium base; Group PP: Poly ether ether ketone (P…
Photo-acoustic excitation and optical detection of fundamental flexural guided wave in coated bone phantoms.
2013
Abstract Photo-acoustic (PA) imaging was combined with skeletal quantitative ultrasound (QUS) for assessment of human long bones. This approach permitted low-frequency excitation and detection of ultrasound so as to efficiently receive the thickness-sensitive fundamental flexural guided wave (FFGW) through a coating of soft tissue. The method was tested on seven axisymmetric bone phantoms, whose 1- to 5-mm wall thickness and 16-mm diameter mimicked those of the human radius. Phantoms were made of a composite material and coated with a 2.5- to 7.5-mm layer of soft material that mimicked soft tissue. Ultrasound was excited with a pulsed Nd:YAG laser at 1064-nm wavelength and received on the s…
Assessment of the cortical bone thickness using ultrasonic guided waves: Modelling and in vitro study
2007
Determination of cortical bone thickness is warranted, e.g., for assessing the level of endosteal resorption in osteoporosis or other bone pathologies. We have shown previously that the velocity of the fundamental antisymmetric (or flexural) guided wave, measured for bone phantoms and bones in vitro, correlates with the cortical thickness significantly better than those by other axial ultrasound methods. In addition, we have introduced an inversion scheme based on guided wave theory, group velocity filtering and 2-D fast Fourier transform, for determination of cortical thickness from the measured velocity of guided waves. In this study, the method was validated for tubular structures by usi…
Determination of Bubble Size Distribution Using Ultrasound Array Imaging
2020
In this article, ultrasonic phased arrays are deployed as an imaging tool for industrial process analysis. Such arrays are typically used for sonar, medical diagnosis, and nondestructive testing; however, they have not yet been applied to industrial process analysis. The precise positioning of array elements and high frequencies possible with this technology mean that highly focused images can be generated, which cannot currently be achieved using ultrasound tomography. This article aims to highlight the potential of this technology for the measurement of bubble size distribution (BSD) and to demonstrate its application to both intrusive and noninvasive process measurements. Ultrasound imag…
On Energy Harvesting Using Piezoelectric Transducer with Two-Port Model Under Force Excitation
2019
Piezoelectric (PE) materials are functional materials that can be used for transforming mechanical stress into electrical energy, that can then be stored and used for powering other devices. In this paper, we provide experimental investigation of PE transducers used for energy harvesting under external force-controlled excitation. The lumped parameter electromechanical model (LPEM) has been assumed and brought into a generalized two-port network notation. Laboratory experiments using a universal test machine (UTM) were performed and used for the parameter identification of the model. The two-port model formulation is validated by comparing results of numerical simulations and experimental d…
Laser ultrasonics for defect evaluation on coated railway axles
2020
Abstract This scientific paper focuses on the application of an advanced non-destructive technique for an effective inspection of railway axles. The method pertains to ultrasonic techniques, which are widely used in the railway field. The experimental investigation was carried out on simulated defects tooled near the cross section reduction of the axle, in order to simulate fatigue cracks which, due to notch effect, can trigger crack propagation and axle failure. The aim of this research activity is to evaluate how efficiently the proposed technique detects defects and to verify its applicability to axles with a black coating for protection. In view of the experimental setup, comprising a p…