Search results for "Scanning"
showing 10 items of 1808 documents
Study of the Curing Process of DGEBA Epoxy Resin Through Structural Investigation
2015
In this work, a multi-scale approach with different analytical methods is applied to study the curing process and the structural properties of a diglycidyl ether of bisphenol A (DGEBA) epoxy resin. This monomer, thermally cured using 4,4′-diaminodiphenilsulfone (DDS) as hardener, is analyzed after 10, 45, 90, and 120 min of reaction time at 180 °C to obtain information on samples with different cross-linking densities. Samples are also characterized after extraction in acetone in order to obtain structural information on the insoluble parts. For this purpose, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), solid-state nuclear magnetic resonance (ss-NMR),…
Evaluation of Ligno Boost™ softwood kraft lignin epoxidation as an approach for its application in cured epoxy resins
2018
Abstract In this study, modification of LignoBoost™ softwood kraft lignin with epichlorhydrin in water-organic solvents media was realized. Lignin-based epoxy resins were obtained by two ways: acetone extraction of glycidylated lignin or glycidylation of the acetone soluble lignin fraction. The effect of glycidylation regimes on the yields of acetone soluble fractions, their functional composition and physical-chemical characteristics was investigated using wet chemistry methods, FTIR spectroscopy, size exclusion chromatography (SEC) and differential scanning calorimetry (DSC). The positive effect of the biphasic phase transfer catalytic system – KOH/quaternary ammonium salt – on glycidylat…
Crystalline microstructure of boehmites studied by multi-peak analysis of powder X-ray diffraction patterns
2017
Nanocrystalline boehmite (gamma-aluminium-oxyhydroxide) is a material of industrial importance, the functionality of which follows from its crystalline microstructure. A procedure for preparing boehmite nanoparticles, comprising the formation of a precipitate by the alkalization of an aqueous solution of aluminium nitrate and subsequent hydrothermal aging, was previously elaborated. The application of an additive (maltitol or tartaric acid) to control the sizes and shapes of crystallites in the produced polycrystalline powder of boehmite was developed. The aim of this work is a study of the effect of the hydrothermal treatment time on nanocrystalline characteristics of boehmite, both in abs…
Effects of thrombin and of the phospholipase C inhibitor, D609, on the vascularity of the chick chorioallantoic membrane.
2000
Abstract Microvascular corrosion casting was used to assess the effects of thrombin and D609, a phospholipase C inhibitor, on the vascularity of the chick embryo chorioallantoic membrane (CAM). Discs containing vehicle, thrombin or D609 were placed on the CAM of fertilized white Leghorn eggs on Day 9 of gestation and vascularity was assessed on Day 11. Thrombin caused significant increases in the numbers (43%), diameters (5%) and lengths (17%), of both pre- and postcapillaries (first-order vessels by centripetal ordering). Conversely, D609 caused a decrease in the numbers (27%), lengths (12%) and diameters (8%) of first-order vessels. D609 decreased the total vascular volume of first- to th…
Determination of particle number and brightness using a laser scanning confocal microscope operating in the analog mode
2008
We describe a method to obtain the brightness and number of molecules at each pixel of an image stack obtained with a laser scanning microscope. The method is based on intensity fluctuations due to the diffusion of molecules in a pixel. For a detector operating in the analog mode, the variance must be proportional to the intensity. Once this constant has been calibrated, we use the ratio between the variance and the intensity to derive the particle brightness. Then, from the ratio of the intensity to the brightness we obtain the average number of particles in the pixel. We show that the method works with molecules in solution and that the results are comparable to those obtained with fluctu…
BALDONE 1.2M TELESCOPE PLATE ARCHIVE - HIDDEN RESERVES OF THE FON PROJECT
2018
The plate archive of the 1.2 m Baldone telescope (Latvia) has approximately 780 and 4660 astronegatives exposed in 1967-1993 in the U (ZU21 + UG1 filter plates) and V (A600N + ZS17 filter films) closed to Johnson system U and V passbands. Digitization of astronegatives is carried out using the Epson Expression 10000XL scanner, the scanning mode is 1200 or 2400 dpi, each field covers 19 square degrees of sky. The plates and films are scanned at the Baldone Observatory, processing of digitized scans is carried out by the observers in Baldone, at the Research Institute "Mykolaiv Astronomical Observatory" and at the Main Astronomical Observatory of the National Academy of Sciences of Ukraine. …
Scanning electron microscopy characterization of ZnSe single crystals grown by solid-phase recrystallization
2000
ZnSe single crystals were grown from n-type microcrystalline boules by a Solid Phase Recrystallization (SPR) method. The recrystallizations were performed under different atmospheres, Ar or Se, and pressures to investigate the influence of growth conditions on the structural features of the resulting crystals. The samples were mechanically and mechano-chemically polished in a bromine methanol solution and, then, etched in HCl for a short time, before characterization. The homogeneity and the nature of defects in the crystals were studied by Cathodoluminescence (CL) in the scanning electron microscope (SEM). CL measurements show the existence of slip bands in the recrystallized samples, like…
Reliability of numerical models for simulating galvanic corrosion processes
2012
International audience; Maturity of numerical simulation represents an important issue in the development of predictive models of galvanic corrosion. As widely used in electrochemical engineering, a coupled electrochemical-transport-reaction (CETR) model is recommended to simulate the current distribution above a galvanic corrosion cell made of the cut-edge of a galvanized steel sheet. Nevertheless, simulating current density distributions obtained experimentally by scanning vibrating electrode technique (SVET) above such a galvanic cell appears to be more accurate using an electrostatic model considering a homogeneous conductivity. In this case, the absence of concentration gradients next …
Cadmium clusters in CdI2layered crystals: the influence on the optical properties
2007
The influence of overstoichiometric Cd i atoms on the optical properties of cadmium iodide layered crystals has been investigated. The results of optical absorption, luminescence, and luminescence excitation studies of CdI 2 crystals with controlled deviation from stoichiometric composition allow observing correlations between the Cd i concentration and features in absorption and emission spectra up to concentrations of 10 18 cm -3 . At higher concentrations the overstoichiometric cadmium atoms form clusters, which were observed using scanning electron microscopy. The extinction spectra of (CdI i ) n clusters are calculated in the frame of Mie theory and are found to correlate with the opti…
Multianalytical Approach to explain the darkening process of hematite pigment in paintings from ancient Pompeii after accelerated weathering experime…
2013
[EN] In this paper, recently excavated fresco painting fragments from the House of Marcus Lucretius (Pompeii) and not exposed to the atmosphere since the eruption of the Mount Vesuvius were subjected to a controlled SO2 atmosphere and high relative humidity. These experiments were conducted in order to simulate under accelerated conditions the possible deterioration of the hematite pigment and plaster. The mineralogical transformation of the polychromy and plaster was monitored using mainly Raman spectroscopy, a non-destructive technique, but also infrared spectroscopy (FT-IR) and scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDS). After different exposure cycles to…