Search results for "Scanning"
showing 10 items of 1808 documents
New insights on the thermal analysis of low moisture composite foods.
2014
Abstract Low moisture baked products were investigated with a view to characterising the effect of both formulation and humidity on their physical stability. At the end of the baking process, the samples were in the amorphous state as a result of starch gelatinization and sugar melting. Their thermal properties were analyzed with differential scanning calorimetry and their glass transitions were studied. The DSC thermograms were thoroughly studied through a Gaussian deconvolution of the first derivative of their heat flow. This approach evidenced a multiple phase behavior with different glass transitions in composite systems. They were associated with either a polymer-rich phase and/or a pl…
Removal of trivalent chromium from tannery waste waters using bone charcoal
2002
International audience; The ability of bone charcoal to remove Cr(III) from aqueous solutions by adsorption has been investigated. The adsorbent used was first characterised and then the adsorption was studied as a function of time and amount of charcoal. Tests were carried out with synthetic solutions whose Cr concentrations (500 mg L-1) were similar to those found in some effluents of Moroccan tannery industries. Cr removal efficiencies higher than 90% were obtained at pH 3.5 using 3 g of bone charcoal and a stirring time of about 30 min. Results of Cr removal by all sieved fractions of bone charcoal had shown the same interesting capabilities for Cr(III) retention. The cross interference…
ChemInform Abstract: Synthesis of Areno-Condensed [24]Annulenes.
2010
[24]Annulenes condensed with three phenanthrene units (11a−d) or with three chrysene ring systems (22) were prepared by multi-step syntheses. The cyclic condensation reaction in the final step led to highly symmetrical compounds. Long flexible alkoxy groups attached to the periphery enhance the solubility and give rise to a strong aggregation of the molecules which was observed in solution by NMR and fluorescence excitation spectroscopy, and in the pure state by the detection of liquid crystalline phases in differential scanning calorimetry and polarization microscopy.
Role of Seroalbumin in the Cytotoxicity of cis-Dichloro Pt(II) Complexes with (N^N)-Donor Ligands Bearing Functionalized Tails
2018
Given the potent anticancer properties of cisdiamminedichloroplatinum( II) and knowing its mode of action, we synthesized four new cis-[PtCl2(N^N)] organoplatinum complexes, two with N-substituted pbi ligands (pbiR = 1-R-2-(2-pyridyl)benzimidazole) (namely, 1 and 2) and two more with 4,4′-disubstituted bpy ligands (bpy = 2,2′-bipyridine) (namely, 3 and 4). We explored their cytotoxicity and ability to bind to deoxyguanosine monophosphate (dGMP), DNA, and albumin models. By 1H NMR and UV−vis spectroscopies, circular dichroism, agarose gel electrophoresis, differential scanning calorimetry measurements, and density functional theory calculations, we verified that only 3 can form aquacomplex s…
Calorimetric and structural investigation of the interaction between bovine serum albumin and high molecular weight dextran in water.
2005
This work studies specific interactions between a small globular protein and a highly flexible, branched polysaccharide using differential scanning calorimetry (DSC), circular dichroism (CD), fluorescence, and turbidimetry measurements. It uses the system water/bovine serum albumin (BSA)/dextran (D 2000) as a model. Dextran molecules are able to form interpolymeric complexes with BSA in water at both low and high temperatures if the polysaccharide is in excess and if the protein exists in its associated state. It leads to a partial destabilization of the secondary and tertiary structures of the protein and an additional exposure of the hydrophobic tryptophan residues to the surface of globu…
Ferricytochrome c encapsulated in silica nanoparticles: structural stability and functional properties.
2004
Using a modified sol-gel technique, we have succeeded in encapsulating ferric cytochrome c in silica nanoparticles obtained from hydrolysis and polycondensation of tetramethylorthosilicate. Particles dimensions have been determined with dynamic light scattering; this technique yields an hydrodynamic radius of about 100 nm, each nanoparticle containing about 10(2)-10(3) proteins. If stored in the cold at low ionic strength, nanoparticles are stable for more than one week, even if a slow radius increase with time is observed. CD measurements show that encapsulated proteins exhibit substantially increased stability against guanidinium hydrochloride induced denaturation. Reduction kinetics of e…
Magnesium alloys laser (Nd:YAG) cladding and alloying with side injection of aluminium powder
2003
International audience; The development of the high purity magnesium alloys (such as WE43) incites the designers to reconsider them, and the car industry appears, these days, the most interested to use this kind of alloy. However, due to their ignitability and tendency to oxidation, magnesium alloys require surface treatments. A series of experiments was carried out in order to improve the corrosion resistance of two types of magnesium alloys, WE43 and ZE41. In most cases, the substrate surface was treated before laser interaction. Side injection of aluminium powder under a 3 kW cw Nd:YAG laser was employed. The deposited layers present very good bond properties. The resulting microstructur…
Preparation, characterization and hydrolytic degradation of PLA/PCL co-mingled nanofibrous mats prepared via dual-jet electrospinning
2017
Abstract PLA/PCL co-mingled nanofibrous mats were prepared via multi-jet electrospinning. The concentration of PLA and PCL in the co-mingled mats were controlled by changing the flow rate of the two polymer solutions. The amount of PLA and PCL in the co-mingled nanofibrous mats was monitored by UV–Vis measurements through a colored dye added to PLA and by FTIR-ATR analysis. Morphology and mechanical properties of the nanofibrous mats were respectively examined by scanning electron microscopy (SEM) and tensile tests. Water contact angles measurements were also carried out in order to investigate the wettability of the materials. Finally, the hydrolytic degradation of the mats in buffer solut…
Synthesis of Hierarchically Grown ZnO@NT-WS2 Nanocomposites
2009
A chemically specific and facile method for growth of ZnO nanorods on WS2 nanotubes (NT-WS2) is reported. The modification strategy is based on the chalcophilic affinity of Zn, which serves as an anchor to immobilize ZnO colloids onto the WS2 nanotubes. The surface bound ZnO colloids have been used as a seed to grow ZnO nanorods on WS2 nanotubes. The immobilization of ZnO colloids was monitored by UV−vis spectroscopy and photoluminescence spectroscopy whereas the growth of ZnO nanorods was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).
Comparison of the efficacy of chemomechanical caries removal (Carisolv') with that of conventional excavation in reducing the cariogenic flora
2004
Summary. Objectives. The usage of minimally invasive procedures and attention to patient comfort are of great importance, especially for dental treatment in small children. This has led to the development of chemomechanical methods for caries removal. The aim of this study was to compare the efficacy of chemomechanical caries removal with that of conventional excavation in reducing the count of the cariogenic flora. Design and setting. Subjects for this study were chosen from children admitted to dental clinic for restorative procedures under general anaesthesia. Samples and methods. Twenty-one children (mean age 43·5 ± 12·0 months) with early childhood caries were included in this stu…