Search results for "Silsesquioxane"
showing 10 items of 65 documents
Synthesis and catalytic studies of Ti-anchored disilanol isobutyl-POSS/alkylaluminum system
2012
Abstract Titanium (IV) precursors anchored to alkyl substituted polyhedral oligomeric silsesquioxane (POSS) disilanol were prepared and characterized. These catalysts formulated as [Ti(O^O)2] and [M(O^O)XCl] are found to be active in polymerization of ethylene at high temperatures in combination with ethylaluminum sesquichloride (Et3Al2Cl3) as co-catalyst. The polyethylene product so obtained is linear, crystalline and displays narrow dispersities. The unique low molecular weight PE formed in this reaction exhibit properties that have potential industrial applications. The effect of various reaction parameters on catalyst performance is described.
Temperature-Responsive Surface Coatings Based on Poly(methylsilsesquioxane)-hybrid Polymers
2007
The present paper presents a new method to build up temperature-responsive surfaces. First a poly(silsesquioxane)-block-poly(N-isopropyl-acrylamide) (PMSSQ-b-PNIPAM) was successfully synthesized using RAFT polymerization. Spin-coating or dip-coating of PMSSQ-b-PNIPAM onto glass surfaces resulted in temperature-responsive surfaces. Surface ATR FT-IR measurements proofed the successful surface modification using PMSSQ-b-PNIPAM. IR fine structures of PNIPAM and PMSSQ could be assigned, respectively. In capillary rise experiments a change of the meniscus height measured at temperatures below or above LCST was observed, indicating a different wetting behavior. Thus, a simple spin- or dip-coating…
The effect of macromolecular architecture of ethylene copolymers with multi-alkenylsilsesquioxane on morphological, rheological and dynamic mechanica…
2021
Abstract The influence of the degree and the way of incorporation of multi-alkenylsilsesquioxane into the polymer chain on morphological, rheological and dynamic mechanical parameters were determined. It was found that POSS incorporated into the polymer chain was located outside the crystalline structure of lamella in amorphous phase. The incorporation of POSS-6-2 as a pendant group resulted in significant increase of separation of macromolecules. The key factor in rheological and dynamic mechanical behavior of copolymers turned out to be the way of POSS incorporation into the polymer chain. The incorporation of POSS into the polymer chain as a pendant group resulted in decreased relaxation…
Interaction in POSS-poly(ethylene-co-acrylic acid) nanocomposites
2013
Use of polyhedral oligomeric silsesquioxane (POSS) in polymer-based nanocomposites is promising for the design of high-performance materials for several applications. In this study, nanocomposites based on ethylene-acrylic acid (EAA) copolymer and POSS molecules were prepared by melt mixing. In particular, partial cage POSS with different pendent organic groups was used to investigate the interaction between the –OH groups of POSS and the acrylic functionalities of the matrix. All nanocomposites were characterized by mechanical, rheological, thermal and spectroscopic analyses. In addition, PE-POSS compounds were prepared under the same processing conditions for sake of comparison. The POSS …
Polyethylene composites filled with n‐alkyl‐functionalized siloxane‐silsesquioxane resins and sol‐gel silicas
2019
High‐density polyethylene (HDPE) composites filled with silicon‐based fillers were prepared by melt blending. The use of non‐functionalized and n‐octyl‐functionalized siloxane‐silsesquioxane resins and the sol‐gel silicas as fillers allowed us to evaluate the influence of functionalization of the fillers on the properties of the composites. The melting and crystallization temperatures of the composites were found to be only slightly affected by the addition of the silicon‐based fillers. In turn, the crystallization degree values were increased, in particular for the materials containing non‐functionalized fillers. The free‐volume properties of the composites did not change significantly in …
Proximity Effect using a Nanocage Structure: Polyhedral Oligomeric Silsesquioxane-Imidazolium Tetrachloro- palladate Salt as a Precatalyst for the Su…
2016
A polyhedral oligomeric silsesquioxane-imidazolium tetrachloropalladate salt (POSS-Imi-PdCl4) was prepared by the reaction of a polyhedral oligomeric silsesquioxane-imidazolium chloride salt (POSS-Imi-Cl) with PdCl2 and used as a pre-catalyst for the Suzuki-Miyaura reaction in water at 100 °C at a low loading (0.08-0.16 mol %). Biphenyl compounds were isolated in high to excellent yields. A comparison of the POSS-based catalyst with the corresponding catalyst without the nanocage structure (i.e., 1-butyl-3-methylimidazolium tetrachloropalladate) highlighted the role of the POSS structure to reach higher yields in the Suzuki-Miyaura reaction. This result is ascribed to a proximity effect of …
Application of Silsesquioxanes in the Preparation of Polyolefin-Based Materials
2023
This paper is a review of studies on the use of the polyhedral oligomeric silsesquioxanes (POSS) of various structures in the synthesis of polyolefins and the modification of their properties, namely: (1) components of organometallic catalytic systems for the polymerization of olefins, (2) comonomers in the copolymerization with ethylene, and (3) fillers in composites based on polyolefins. In addition, studies on the use of new silicon compounds, i.e., siloxane–silsesquioxane resins, as fillers for composites based on polyolefins are presented. The authors dedicate this paper to Professor Bogdan Marciniec on the occasion of his jubilee.
Antifouling Systems Based on a Polyhedral Oligomeric Silsesquioxane-Based Hexyl Imidazolium Salt Adsorbed on Copper Nanoparticles Supported on Titania
2023
The reaction of octakis(3-chloropropyl)octasilsesquioxane with four equivalents of 1-hexylimidazole or 1-decylimidazole gave two products labelled as HQ-POSS (hexyl-imidazolium quaternized POSS) and DQ-POSS (decyl-imidazolium quaternized POSS) as regioisomer mixtures. An investigation of the biological activity of these two compounds revealed the higher antimicrobial performances of HQ-POSS against Gram-positive and Gram-negative microorganisms, proving its broad-spectrum activity. Due to its very viscous nature, HQ-POSS was adsorbed in variable amounts on the surface of biologically active oxides to gain advantages regarding the expendability of such formulations from an applicative perspe…
Polypropylene/polyhedral oligomeric silsesquioxane nanocomposites – study of free volumes, crystallinity degree and mass flow rate
2016
Nanokompozyty polipropylen/poliedryczne oligomeryczne silseskwioksany (PP/POSS) przygotowano metodą mieszania w stanie stopionym polimeru. Wpływ struktury oraz ilości zastosowanych nanonapełniaczy POSS na objętości swobodne w polipropylenie określono z zastosowaniem spektroskopii czasów życia pozytonów (PALS). Ustalono zależności pomiędzy parametrami PALS: czasem życia o-Ps (τ3) i natężeniem (I3) składowej o-Ps oraz wartościami stopnia krystaliczności (Xc ) i masowego wskaźnika szybkości płynięcia (MFR) badanych materiałów. Obecność nanonapełniaczy POSS wpłynęła na liczbę i rozmiary objętości swobodnych w polimerze, co spowodowało zmianę mikrostruktury osnowy polipropylenowej. Wraz ze zwięk…
Polimeryzacja koordynacyjna alkenylosilseskwioksanów i ich kopolimeryzacja z olefinami lub styrenem
2015
Artykuł stanowi kontynuację przeglądu literatury dotyczącej koordynacyjnej polimeryzacji silseskwioksanów (POSS), zawierających zdolne do polimeryzacji wiązanie podwójne, oraz ich kopolimeryzacji głównie zolefinami, a także ze styrenem. Zastosowanie katalizatorów metalocenowych aktywowanych metyloaluminoksanem (MAO) zapewnia efektywną (ko)polimeryzację silseskwioksanów zarówno z olefinami, jak i styrenem. Wprowadzenie do materiału polimerowego komonomeru POSS korzystnie wpływa na właściwości otrzymanych produktów, które cechują się większą odpornością termiczną oraz wytrzymałością mechaniczną niż ich odpowiedniki niezawierające POSS.