Search results for "Solution"
showing 10 items of 5638 documents
Correlation between surface forces and surface reactivity in the setting of plaster by atomic force microscopy
2000
Abstract The setting of mineral binders (cement, plaster, etc.) arises as a direct consequence of surface reactivity by a process of dissociation and rehydration. This transformation induces a complete change of surface forces, of which the nature remains still unknown. The general process of the setting has been studied by means of plaster (CaSO 4 ·0.5H 2 O) crystals, chosen for an experimental convenience. The surface alteration (growth, dissolution, atomic resolution) of the plaster crystal with respect to the introduction of the calcium sulfate solution has been followed by using atomic force microscopy (AFM. Alternatively, this apparatus has been adapted by gluing a plaster microcrysta…
Investigation of magnesium phosphate cement hydration in diluted suspension and its retardation by boric acid
2016
Abstract Magnesium phosphate cements (MPCs) are used for rapid repair works, but they may also offer prospects for the stabilization/solidification of deleterious waste. MPCs contain calcined magnesium oxide and a water-soluble acid phosphate, such as potassium dihydrogen phosphate (KH 2 PO 4 ). The main precipitated hydrate is then K-struvite (MgKPO 4 ·6H 2 O). This work aims at giving new insight into the processes involved in its formation. Since cement hydration is very rapid, the second objective is to understand how boric acid, a common admixture for field application, retards cement hydration. A multi-stage process is evidenced in diluted suspension: MgHPO 4 ·7H 2 O likely precipitat…
Hydration of alite containing aluminium
2011
Abstract The most important phase in Portland cement is tricalcium silicate, which leads during its hydration to the nucleation and growth of calcium silicate hydrate [referred to as C–S–H, (CaO)x–SiO2–(H2O)y]. The development of this hydrate around the cement grains is responsible for the setting and hardening of cement pastes. The general term for designating the tricalcium silicate in cements is alite. This name relates to all polymorphs containing various foreign ions inserted in their structure. These ions may influence the intrinsic reactivity, and once released during the dissolution, they may interact also with C–S–H. One of the most likely species to be inserted in the alite struct…
On the physico-chemical evolution of low-pH and CEM I cement pastes interacting with Callovo-Oxfordian pore water under its in situ CO2 partial press…
2014
International audience; Abstract Within the framework of geological repositories for radioactive waste, structural concretes must be adapted to the underground chemical conditions. CEM I cement-based materials are characterised by high pH that may produce an alkaline plume in the near-field of the repository. In order to avoid this problem, low-pH cements have been designed. This study compares the physico-chemical behaviour of a low-pH material with a CEM I cement paste, both being subjected to leaching by an aqueous solution. An original experimental setup was designed to reproduce the underground conditions using a specific CO2 regulation device. Under these conditions, the low-pH materi…
Studies on mechanism and physico-chemical parameters at the origin of the cement setting II. Physico-chemical parameters determining the coagulation …
1996
The physico-chemical parameters determining the coagulation of cements grains previously identified as the first fundamental process of cement setting have been investigated in diluted suspensions using an adapted granulometric method. The analysis of the influence of the ionic concentration in solution on the coagulation reveals that calcium concentration is the parameter which determines the particle interactions. There exists a minimum critical concentration of calcium ions in solution which is required to occur the coagulation of cement particles and a dispersive effect appears for very high concentrations. The results are discussed in relation with DLVO theory and specific interactions.
Centre-pivot irrigation system design for uniform water application rate
2020
<p>In the last few decades, the use of centre-pivot irrigation systems has significantly increased, since it makes farming easier, is more efficient and less time-consuming compared to the other irrigation systems. Several studies have been focused on the hydraulics of the centre-pivot systems. Standard high-pressure impact sprinklers or low-pressure spray sprinklers or Low Energy Precision Application (LEPA) systems are generally mounted on the pipeline.</p><p>To ensure the uniformity of water application, the centre-pivot design requires increasing the flow rates along the lateral, because the sprinklers farther from the pivot move faster, and th…
Diffusion in slice preparations bathed in unstirred solutions
1987
A diffusion model is described here, which allows for the estimations of drug concentration changes in porous media, such as in slice tissues of the central nervous system (CNS) bathed in unstirred solutions following abrupt changes of drug concentration. This model may be used for the interpretation of data obtained in neuropharmacological studies if (i) the diffusion coefficient of the molecules under investigation is constant within the excised tissue, (ii) drug molecules are diffusing only in the extracellular space (ECS) and are not bound by the tissue, (iii) drug molecules diffuse mainly within one dimension, (iv) the drug concentration in the bath is changed within 5 s, and (v) the b…
Development of new centrifuges for fast solvent extraction of transactinide elements
1995
The H-0.3 liquid-liquid centrifuge applied for rapid and efficient separation of two liquid phases, and the HG-0.1 gas-liquid centrifuge used to separate the gas phase stemming from a gas jet transportation system and the liquid phase, have been further improved. New centrifuges have been produced of PEEK, a plastic material, which makes them resistant to most aqueous and organic solutions. The performance with respect to time behavior and phase purity is comparable to the titanium centrifuges used so far. The H-0.3 centrifuge has been applied to solvent extraction studies of Zr, Nb, Mo, Hf, Ta, W and Pa from HF solutions into tri-n-octylamine.
Nanoscale Chemical Interaction Enhances the Physical Properties of Bioglass Composites
2013
Bioglasses are favorable biomaterials for bone tissue engineering; however, their applications are limited due to their brittleness. In addition, the early failure in the interface is a common problem of composites of bioglass and a polymer with high mechanical strength. This effect is due to the phase separation, nonhomogeneous mixture, nonuniform mechanical strength, and different degradation properties of two compounds. To address these issues, in this study a nanoscale interaction between poly(methyl methacrylate) (PMMA) and bioactive glass was formed via silane coupling agent (3-trimethoxysilyl)propyl methacrylate (MPMA). A monolith was produced at optimum composition from this hybrid …
EXAFS study of ceria–lanthana-based TWC promoters prepared by sol–gel routes
2003
Extended X-ray absorption fine structure (EXAFS) experiments at the Ce K- and La K-edges were performed on ceria–lanthana–alumina three-way catalysts promoters prepared by sol–gel routes, in order to investigate the effect of lanthanum doping on the ceria structure. The formation of Ce1−xLaxO2−x/2 solid solution, already observed by X-ray diffraction, was confirmed by EXAFS analysis, while no experimental evidence of a Ce–Al interaction was found. In presence of cerium and aluminum, lanthanum is involved in the formation of solid solution with CeO2 and of La–Al compounds. When the La:Al molar ratio is sufficiently high, the growth of a tridimensionally ordered LaAlO3 perovskite compound is …