Search results for "Spectroscopy"
showing 10 items of 10293 documents
Atomic layer deposition of polyimide thin films
2007
The atomic layer deposition (ALD) of different polyimide thin films has been studied. We have demonstrated self-limiting ALD deposition of PMDA–DAH, PMDA–EDA, PMDA–ODA and PMDA–PDA thin films at 160 °C. The maximum deposition rate of 5.8 A cycle−1 was obtained for the PMDA–DAH process. Although the deposition rate was high at 160 °C, a sudden decrease was observed when the temperature was increased. Regardless of the process studied, no film growth was obtained at 200 °C or above. Deposited polyimide films were analysed by FTIR, AFM and TOF-ERDA. According to the FTIR measurements, imide bonds were formed already in as-deposited films indicating polyimide formation without any additional th…
Cytotoxic labdane diterpenes and bisflavonoid atropisomers from leaves of Araucaria bidwillii
2017
Abstract Chemical investigation of a methanolic extract of leaves from Araucaria bidwillii (Araucariaceae) from Egypt afforded four new labdane diterpenoidal metabolites (1–4) together with one known diterpene, 7-oxocallitrisic acid (5), two triterpenoidal metabolites, 2-O-acetyl-11-keto-boswellic acid (6) and β-sitosterol-3-O-glucopyranoside (7), phloretic acid (8), and two methylated bisflavonoids, agathisflavone-4′,7,7″-trimethyl ether (9) and cupressuflavone-4′,7,7″-trimethyl ether (10). The new metabolites 1–4 were unambiguously identified by applying extensive 1D and 2D NMR spectroscopic studies as well as HRESIMS. The relative and absolute configurations of 1–4 were determined using …
Metal-support and preparation influence on the structural and electronic properties of gold catalysts
2006
Abstract Nanostructured gold catalysts supported on CeO2 and SiO2 were prepared by the deposition–precipitation (DP) and the solvated metal atom dispersion (SMAD) techniques. The structural and electronic properties of the catalysts were investigated by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). Gold was found as small metal nanoparticles (cluster size ∼2 nm) in the SMAD-prepared samples and in ionic state in the DP catalysts. The catalytic activity of the samples was tested in the reaction of low temperature CO oxidation. Gold nanosized particles in a pure metallic state exhibited a worse catalytic performance, both on ceria and…
Structural properties of the quaternary Heusler alloy Co2Cr1−xFexAl
2007
The quarternary substitutional series Co2Cr1?xFexAl was investigated by means of surface and bulk sensitive techniques in order to exploit its structural and compositional properties. Both bulk and powder samples of the alloy series were investigated to obtain specific information about this material.The long range order was determined by means of x-ray diffraction and neutron diffraction, while the site specific (short range) order was proved by extended x-ray absorption fine structure spectroscopy. The magnetic structure was investigated by M?ssbauer spectroscopy in transmission and scattering modes in order to compare and separate powder and bulk properties. The chemical composition was …
Surface spectroscopic study of the corrosion of ultrathin57Fe-evaporated and Langmuir-Blodgett films in humid SO2 environments
2000
Integral conversion electron Mossbauer spectroscopy (ICEMS), x-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and scanning electron microscopy (SEM) have been used to carry out a comparative study of the corrosion resistance against humid SO2-aggressive environments of ultrathin 57Fe films. These films, having a thickness ≤ 2.5 nm, have been prepared by evaporation of 57Fe under vacuum and by 57Fe coating by a Langmuir–Blodgett (LB) technique on SiO2/Si wafers. The results have shown that the corrosion resistance of the evaporated films is similar to that of massive Fe. However, the LB films show a remarkably higher corrosion resistance. Thus, although the Fe films …
Reactivity of H2S and H2S/H2 Mixture With Molybdenum Oxide Thin Films Epitaxied on CoO (100) : Characterization by Rheed and Auger Spectroscopy
2010
Molybdenum-Cobalt composite oxide films were prepared by the evaporation of molybdenum trioxide on a fresh cleaved CoO (100) surface (Thickness = 10 A). The MoO3-CoO interface has been characterized simultaneously by reflexion high electron diffraction (RHEED) and Auger Electron Spectroscopy (AES). The thin film structure and composition depend on the annealing temperature. After a 300°C treatment, metallic cobalt islands nucleate at the interface thin film - CoO (100) and crystallize with the cubic FCC symmetry. After a 700°C treatment cobalt molybdate (a CoMoO4) islands grow. The metastable crystallites are epitaxied on CoO (100). After a 900°C treatment, the thin film consists of flat tw…
Functionalization using biocompatible carboxylated cyclodextrins of iron-based nanoMIL-100
2021
9 pags., 7 figs., 1 tab.
SVET, AFM and AES study of pitting corrosion initiated on MnS inclusions by microinjection
2003
As pitting is a random phenomenon, it is difficult to predict where a pit will appear on the surface and consequently the use of local probes is rendered difficult. In this work, a new method to study pitting corrosion on a MnS inclusion on 316L stainless steel is proposed. It consists in modifying locally the chemistry in its vicinity by injecting with a microcapillary an aggressive solution of NaCl, H2SO4 or HCl. Once a pit appears, scanning vibrating electrode technique (SVET) is used to follow the current fluctuations over and around the pit when the metal is polarized at a passive potential. In another series of experiments the effect of local activation of MnS inclusion was studied ex…
Iron deposition on TiO2(110): effect of the surface stoichiometry and roughness
1999
Abstract Characterizations of ultra-thin iron films deposited on TiO 2 (110) surfaces with different stoichiometries, roughnesses and crystallinities have been carried out by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). For a high initial roughness of the substrate, a 2D growth mode is observed up to three monolayers. But, if the initial roughness is low, clusters grow on the TiO 2 surface. Whatever the initial surface stoichiometry, electronic exchanges occur between titanium and iron leading to a reduction of titanium and an oxidation of iron. This interaction between iron and titanium dioxide surface takes place only at the interface between the metal and…
Structural properties of the quaternary Heusler compound Co2 Cr1−x Fex Al
2006
Abstract The structural and chemical properties of the quaternary Heusler compound Co2 Cr1−x Fex Al were investigated comparing powder and bulk samples. The long range order was determined by means of X-ray diffraction, while the site specific (short range) order was proved by the extended X-ray absorption fine structure method (EXAFS). The chemical composition was analysed by means of X-ray photo emission spectroscopy (XPS) combined with Auger electron spectroscopy (AES) depth profiling. The results from these methods are compared to get a detailed idea about the differences between surface and bulk properties and appearance of disorder in such alloys.