Search results for "Spectroscopy"

showing 10 items of 10293 documents

Positron annihilation characterization of free volume in microand macro-modified Cu0.4Co0.4Ni0.4Mn1.8O4ceramics

2016

Free volume and pore size distribution size in functional micro and macro-micro-modified Cu0.4Co0.4Ni0.4Mn1.8O4 ceramics are characterized by positron annihilation lifetime spectroscopy in comparison with Hg-porosimetry and scanning electron microscopy technique. Positron annihilation results are interpreted in terms of model implication positron trapping and ortho-positronium decaying. It is shown that free volume of positron traps are the same type for macro and micro modified Cu0.4Co0.4Ni0.4Mn1.8O4 ceramics. Classic Tao-Eldrup model in spherical approximation is used to calculation of the size of nanopores smaller than 2 nm using the ortho-positronium lifetime.

010302 applied physicsMaterials sciencePhysics and Astronomy (miscellaneous)Scanning electron microscopeGeneral Physics and Astronomy02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesMolecular physicsCharacterization (materials science)Nuclear physicsNanoporePositronVolume (thermodynamics)visual_art0103 physical sciencesvisual_art.visual_art_mediumCeramicPhysics::Chemical Physics0210 nano-technologyPorositySpectroscopy
researchProduct

Ab initio calculations of structural, electronic and vibrational properties of BaTiO3 and SrTiO3 perovskite crystals with oxygen vacancies

2020

The first-principles (ab initio) computations of the structural, electronic, and phonon properties have been performed for cubic and low-temperature tetragonal phases of BaTiO3 and SrTiO3 perovskite crystals, both stoichiometric and non-stoichiometric (with neutral oxygen vacancies). Calculations were performed with the CRYSTAL17 computer code within the linear combination of atomic orbitals approximation, using the B1WC advanced hybrid exchange-correlation functional of the density-functional-theory (DFT) and the periodic supercell approach. Various possible spin states of the defective systems were considered by means of unrestricted (open shell) DFT calculations. It was demonstrated that…

010302 applied physicsMaterials sciencePhysics and Astronomy (miscellaneous)Spin statesAb initioGeneral Physics and Astronomy01 natural sciencesMolecular physicsCondensed Matter::Materials Sciencesymbols.namesakeAb initio quantum chemistry methodsLinear combination of atomic orbitalsVacancy defect0103 physical sciencesPhysics::Atomic and Molecular Clusterssymbols010306 general physicsRaman spectroscopyOpen shellPerovskite (structure)Low Temperature Physics
researchProduct

Effect of Mn doping on the low-temperature synthesis of tricalcium phosphate (TCP) polymorphs

2019

Abstract Effect of Mn doping on the low-temperature synthesis of tricalcium phosphate (TCP) polymorphs was demonstrated in α- and β-TCP polymorphs prepared by wet precipitation method under identical conditions and annealed at 700 °C. Calcium phosphates with Mn doping level in the range from 1 to 5 mol% were studied and the formation of desired polymorph was controlled by varying Mn content in as-prepared precipitates. It was found that increasing Mn content resulted in the formation of β-TCP, while α-TCP was obtained with low Mn doping level, whereas a mixture of two polymorphs was obtained for intermediate Mn concentrations. Moreover, doping with Mn ions allowed the synthesis of β-TCP at …

010302 applied physicsMaterials sciencePrecipitation (chemistry)Scanning electron microscopeDopingInfrared spectroscopy02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesIonlaw.inventionlaw0103 physical sciencesMaterials ChemistryCeramics and CompositesFourier transform infrared spectroscopyInductively coupled plasma0210 nano-technologyElectron paramagnetic resonanceNuclear chemistryJournal of the European Ceramic Society
researchProduct

Enhancement of the dielectric response through Al-substitution in La1.6Sr0.4NiO4 nickelates

2016

The structures and dielectric properties of La1.6Sr0.4Ni1−xAlxO4 (x = 0, 0.2 and 0.4) ceramics elaborated using the Pechini method were studied for the first time. The same unique tetragonal phase was found in all compounds. The lattice parameters were found using Rietveld refinement. The surface morphology characterization and elemental analysis of these samples were respectively carried out using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). A giant dielectric response was observed in these ceramics, and one dielectric relaxation was found. The substitution of nickel with aluminum results in a colossal dielectric constant value (>106). The dielectric l…

010302 applied physicsMaterials scienceScanning electron microscopeRietveld refinementGeneral Chemical EngineeringAnalytical chemistrychemistry.chemical_elementMineralogy02 engineering and technologyGeneral ChemistryDielectric021001 nanoscience & nanotechnology01 natural sciencesTetragonal crystal systemNickelchemistryvisual_art0103 physical sciencesvisual_art.visual_art_mediumDielectric lossCeramic0210 nano-technologySpectroscopyRSC Advances
researchProduct

Gel combustion synthesis and magnetic properties of CoFe2O4, ZnFe2O4, and MgFe2O4 using 6-aminohexanoic acid as a new fuel

2020

Abstract For the first time, 6-aminohexanoic acid is used as an alternative fuel in the synthesis of the spinel ferrites with compositions CoFe2O4, ZnFe2O4 and MgFe2O4 using gel combustion synthesis with different oxidizer-to-fuel (O/F) ratios. The gel precursors were studied by differential thermal analysis and thermogravimetry (DTA/TG), which showed that the ignition temperature depends on the gel precursor, being around 230 °C, 130 °C and 275 °C for CoFe2O4, ZnFe2O4, and MgFe2O4, respectively. These results showed than the 6-aminohexanoic acid has an ignition temperature lower than the urea and the citric acid when were used in the synthesis of the spinel ferrites by gel combustion. More…

010302 applied physicsMaterials scienceSpinelAnalytical chemistryAutoignition temperature02 engineering and technologyengineering.material021001 nanoscience & nanotechnologyCondensed Matter PhysicsCombustion01 natural sciencesElectronic Optical and Magnetic MaterialsAdiabatic flame temperatureThermogravimetryZinc ferriteDifferential thermal analysis0103 physical sciencesengineeringFourier transform infrared spectroscopy0210 nano-technologyJournal of Magnetism and Magnetic Materials
researchProduct

Raman characterization of Pb2Na1−xLaxNb5−xFexO15 and Pb0.5(5−x)LaxNb5−xFexO15 (0≤x≤1) solid solutions

2011

Abstract The ferroelectric compounds Pb 2 Na 1− x La x Nb 5− x Fe x O 15 and Pb 0.5(5− x ) La x Nb 5− x Fe x O 15 (0≤ x ≤1) with the tungsten bronze type structure have been investigated using Raman spectroscopy. The evolution of the spectra as a function of composition at room temperature is reported. In the frequency range 200–1000 cm −1 three main A 1 phonons around 240 ( υ 1 ), 630 ( υ 2 ) and 816 ( υ 3 ) cm −1 were observed. The broadening of the Raman lines for high values of x originates from a significant structural disorder. This is in good agreement with the relaxor character of these compositions. The lowest-frequency part of the spectra, below 180 cm −1 , reveals a structural ch…

010302 applied physicsMaterials science[ PHYS.COND.CM-MS ] Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Analytical chemistrychemistry.chemical_element02 engineering and technologyAtmospheric temperature rangeTungsten021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesFerroelectricitySpectral lineElectronic Optical and Magnetic Materialssymbols.namesakechemistry0103 physical sciences[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]symbolsElectrical and Electronic Engineering0210 nano-technologySpectroscopyRaman spectroscopyRaman scatteringSolid solutionPhysica B: Condensed Matter
researchProduct

A new Collinear Apparatus for Laser Spectroscopy and Applied Science (COALA).

2020

We present a new collinear laser spectroscopy setup that has been designed to overcome systematic uncertainty limits arising from high-voltage and frequency measurements, beam superposition, and collisions with residual gas that are present in other installations utilizing this technique. The applied methods and experimental realizations are described, including an active stabilization of the ion-source potential, new types of ion sources that have not been used for collinear laser spectroscopy so far, dedicated installations for pump-and-probe measurements, and a versatile laser system referenced to a frequency comb. The advanced setup enables us to routinely determine transition frequenci…

010302 applied physicsMaterials sciencebusiness.industryLaserResidual01 natural sciences010305 fluids & plasmasIonlaw.inventionMetrologyFrequency combSuperposition principleOpticslaw0103 physical sciencesSpectroscopybusinessInstrumentationBeam (structure)The Review of scientific instruments
researchProduct

Spectroscopic study of ion temperature in minimum-B ECRIS plasma

2019

Experimentally determined ion temperatures of different charge states and elements in minimum-B confined electron cyclotron resonance ion source (ECRIS) plasma are reported. It is demonstrated with optical emission spectroscopy, complemented by the energy spread measurements of the extracted ion beams, that the ion temperature in the JYFL 14 GHz ECRIS is 5–28 eV depending on the plasma species and charge state. The reported ion temperatures are an order of magnitude higher than previously deduced from indirect diagnostics and used in simulations, but agree with those reported for a quadrupole mirror fusion experiment. The diagnostics setup and data interpretation are discussed in detail to …

010302 applied physicsMaterials scienceionitPlasma spectroscopyspektroskopiaAnalytical chemistryIon temperaturePlasmaCondensed Matter Physics7. Clean energy01 natural sciences010305 fluids & plasmasPhysics::Plasma Physicsion temperature0103 physical scienceslämpötilaspectroscopic studyOptical emission spectroscopyDoppler broadeningPlasma Sources Science and Technology
researchProduct

Atomic Layer Deposition of LiF Thin Films from Lithd, Mg(thd)2, and TiF4 Precursors

2013

Lithium fluoride is an interesting material because of its low refractive index and large band gap. Previously LiF thin films have been deposited mostly by physical methods. In this study a new way of depositing thin films of LiF using atomic layer deposition (ALD) is presented. Mg(thd)2, TiF4 and Lithd were used as precursors, and they produced crystalline LiF at a temperature range of 300–350 °C. The films were studied by UV–vis spectrometry, field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), atomic force microscopy (AFM), time-of-flight elastic recoil detection analysis (ToF-ERDA), and energy dispersive X-ray spectroscopy (EDX). In addition, film adhesion was t…

010302 applied physicsMaterials scienceta214ta114Band gapGeneral Chemical EngineeringAnalytical chemistryLithium fluoride02 engineering and technologyGeneral ChemistryAtmospheric temperature range021001 nanoscience & nanotechnology01 natural sciencesElastic recoil detectionchemistry.chemical_compoundAtomic layer depositionchemistryImpurity0103 physical sciencesMaterials ChemistryThin film0210 nano-technologySpectroscopyChemistry of Materials
researchProduct

Influence of surface topography on depth profiles obtained by Rutherford backscattering spectrometry

2000

A method for determining correct depth profiles from samples with rough surfaces is presented. The method combines Rutherford backscattering spectrometry with atomic force microscopy. The topographical information obtained by atomic force microscopy is used to calculate the effect of the surface roughness on the backscattering spectrum. As an example, annealed Au/ZnSe heterostructures are studied. Gold grains were observed on the surfaces of the annealed samples. The annealing also caused diffusion of gold into the ZnSe. Backscattering spectra of the samples were measured with a 2 MeV 4He+ ion beam. A scanning nuclear microprobe was used to verify the results by measuring backscattering fro…

010302 applied physicsMicroprobeMaterials scienceIon beamAnnealing (metallurgy)Analytical chemistryGeneral Physics and AstronomyHeterojunction02 engineering and technologyCondensed Matter::Mesoscopic Systems and Quantum Hall Effect021001 nanoscience & nanotechnologyRutherford backscattering spectrometry01 natural sciencesSpectral lineCondensed Matter::Materials Science0103 physical sciencesSurface roughness0210 nano-technologySpectroscopyJournal of Applied Physics
researchProduct