Search results for "Spinning"
showing 10 items of 204 documents
Processing-structure-property relationships of electrospun PLA-PEO membranes reinforced with enzymatic cellulose nanofibers
2020
Abstract Three different solvent mixtures were used to prepare electrospun membranes based on polylactic acid (PLA), polyethylene oxide (PEO) and enzymatic cellulose nanofibers (CNF). The materials were characterized from a morphological, spectroscopic, mechanical and rheological point of view. Furthermore, swelling test were performed in order to assess the water uptake of each sample. The results put into evidence that the choice of the solvents affects the structure and the properties of the membranes. Among the protocols tested, using chloroform/acetone/ethanol mixture was found to allow a high degree of CNF dispersion and a good electrospinnability of polymer solutions. These features …
Optimization of spinning, drawing, and annealing conditions in the production of highly oriented fibers from the polycaprolactam/3.7% LiCl system
1982
A polycaprolactam/3.7% w/w LiCl system, obtained by anionic polymerization of caprolactam directly in the presence of salt, has been employed for the production of highly oriented fibers. More particularly, an optimization of spinning, drawing, and annealing conditions has been performed, finally obtaining fibers which shows very satisfactory mechanical results. Namely, average moduli values up to 12 GPa and strength values up to 1 GPa when fracture is far from clamps, have been observed.
Optimization of electrospun polylactide-based ultrathin fibers for osteoconductive bone scaffolds
2011
Bone tissue interfacial scaffolds, which encourage cell growth, are critical determinants for clinical success after implant surgery. Over the years, a number of resorbable configurations have emerged for bone cell support and growth, but only a few have demonstrated clinical efficacy. Polymer coatings produced by electrospinning are regarded as very promising bone interfaces because of the ultrathin-scaled dimensions of its physical structure. In this study, the morphology, composition, thermal properties, and cell growth viability of a number of polylactide-based systems containing different binary and ternary formulations of this biomaterial with collagen and commercial hydroxyapatite na…
Phase behaviour and interfacial tension of polysiloxane blends
1998
Abstract The cloud point curve for blends of poly(dimethyisiloxane) (PDMS, M w = 2.5kg mol −1 ) and poly(hexylmethylsiloxane) (PHMS, M w = 113kg mol − ] was determined turbidimetrically. The system demixes upon cooling and the UCST amounts to 36°C. The interfacial tension γ was determined at the critical composition for three temperatures by means of a spinning drop tensiometer. The dependence of γ on the reduced critical temperature can be described within experimental error by both the mean field theory and the Ising-3D theory.
PLA-based functionally graded laminates for tunable controlled release of carvacrol obtained by combining electrospinning with solvent casting
2020
Abstract A novel approach was designed to fabricate high-added value manufacts, starting from cost-effective materials and combining well-known processing techniques. Bi- and three-layered, functionally graded laminates were achieved by direct electrospinning onto dense substrates. The architecture of each multilayer comprises a dense layer formed by solvent casting, which is constituted by polylactic acid (PLA) and carvacrol, and one or two electrospun fibrous skin layers, consisting of PLA only. Processing-structure-properties relationships of such materials were investigated. As regards mechanical behavior, the amount of fibrous PLA layers determined an increase of stiffness from 20 to 3…
Physicomechanical properties of composites from recycled polyethylene and linen yarn production wastes
1999
The possibilities of utilizing wastes of linen thread production (chaffs, spinning and roving losses) in recycled polyolefin composites have been investigated. The wastes were mixed with recycled polyethylenes (produced from domestic and industrial film production wastes). The physicomechanical properties (tensile strength, bending and tensile moduli, and water resistance) and the fluidity (melt flow-behavior index) for systems with a different filler content are estimated. Almost all the composite materials obtained have satisfactory fluidity (melt flow-behavior index is not lower than 0.07–0.15 dg/min). For all types of the composites, a slight increase in tensile strength and a considera…
Tunable release of Chlorhexidine from Polycaprolactone-based filaments containing graphene nanoplatelets
2019
Abstract Graphene nanoplatelets (GNP) as fillers and Chlorhexidine (CHX), as an antibacterial agent, were incorporated in a polycaprolactone (PCL) matrix and processed into filaments by melt spinning. The influence of both drawing and formulation on the processability, spinnability, mechanical properties and release behaviour of these materials were deeply investigated by performing rheological, morphological analysis, tensile tests, and by measuring the cumulative release of CHX in PBS at 37 °C. Furthermore, Korsmeyer–Peppas model was adopted to study the kinetics release mechanism. The results showed that adding GNP did not alter the processability and spinnability of the systems. Further…
Processing, structure, property relationships and release kinetics of electrospun PLA/Carvacrol membranes
2018
Abstract In this work, polylactic acid (PLA) membranes at two different carvacrol (CRV) nominal concentration (i.e. 14 wt% and 28 wt%) were prepared via electrospinning technology. The membranes were characterized by scanning electron microscopy, ATR-FTIR and calorimetric measurements as well as tensile tests. Moreover, the release kinetics of CRV in phosphate buffered solution at 37 °C was monitored through UV–Vis measurements and the data were fitted with a power law model. Results indicated that the successful incorporation of CRV in the polymer matrix damaged the fibers morphology but increased all the mechanical parameters investigated (i.e. elastic modulus, tensile strength and elonga…
Effect of alkyl derivatization of gellan gum during the fabrication of electrospun membranes
2021
Electrospun nanofibers based on polysaccharides represent a consolidated approach in Tissue Engineering and Regenerative Medicine (TERM) and nanomedicine as a drug delivery system (DDS). In this work, two chemical derivatives of a low molecular weight gellan gum (96.7 kDa) with aliphatic pendant tails were processed by electrospinning technique into non-woven nanofibrous mats. In order to generate spinnable blends, it was necessary to associate poly vinyl alcohol (PVA). The relationships between the physicochemical properties and the processability via electrospinning technique of gellan gum alkyl derivatives (GG-C8 and GG-C12 having a degree of alkyl chain derivatization of 17 mol % and 1…
Structure–property relationship and controlled drug release from multiphasic electrospun carvacrol-embedded polylactic acid/polyethylene glycol and p…
2018
Electrospinning technologies gained considerable interest over the last decade. In this study, it is proposed a systematic study of polylactic acid/polyethylene glycol (PLA/PEG) and polylactic acid/polyethylene oxide (PLA/PEO) electrospun blends at different concentrations. The effect of blend composition and PEG molecular weight on the morphological and mechanical properties of the mats was evaluated. Furthermore, the kinetic release of carvacrol as model drug in phosphate buffer saline at 37℃ was studied and the data were then fitted using an exponential model. The scanning electron microscopy revealed that the morphology of the mats was strongly dependent on the relative ratio PLA:PEG, …