Search results for "Steel"
showing 10 items of 338 documents
Photoelectrochemical monitoring of rouging and de-rouging on AISI 316L
2017
Electrochemical conditions for inducing rouging on surface of AISI 316L in quasi neutral aqueous solution are studied. Potentiostatic polarization at 0.6 V vs. SSC at pH ∼ 7 allowed growth of colourless passive films with a band gap slightly lower than that estimated for the oxide grown on the SS surface by air exposure due to chromium dissolution. Under stronger anodic polarization (UE = 1.5 V vs. SSC) coloured passive films are formed, mainly constituted by iron oxide according to their band gap (Eg = 2.0 eV). Etching in citric acid at 60 °C results to be effective in removing rouging.
Semiconducting properties of passive films and corrosion layers on weathering steel
2020
Abstract Anodic films were grown on Weathering Steel by potentiostatic polarization in slightly alkaline solution. The photoelectrochemical results reveal that they are n-type iron oxide with Eg = 2.0 eV. Rust layer grown by atmospheric corrosion are n-type semiconductors with a band gap higher than that estimated for the anodic film attributed to the formation of γ-lepidocrocite. The electrochemical impedance spectra allow to evidence that rust layers have a higher conductivity with respect to anodic films due to the presence of highly doped iron oxide layers. The use of Mott-Schottky theory to model the dependence of oxide capacitance as function of potential is critically discussed.
Chitosan-Coating Deposition via Galvanic Coupling
2019
A galvanic method to deposit chitosan coatings on stainless steel substrate is reported. Deposition of suitable coatings is desired to improve biocompatibility and corrosion resistance of metallic medical devices to be implanted in human body. In the present work, a thin hydrogel layer of chitosan was deposited on 304SS by a galvanic displacement reaction, which is advantageous first as it does not require external power supply. 304SS was immersed into an aqueous solution of chitosan/lactic acid and electrochemically coupled with magnesium acting as a sacrificial anode. SEM images showed the formation of a uniform layer of chitosan with a thickness controlled by deposition time. Corrosion t…
New generation super alloy candidates for medical applications: Corrosion behavior, cation release and biological evaluation
2014
Three super alloy candidates (X1 CrNiMoMnW 24-22-6-3-2 N, NiCr21 MoNbFe 8-3-5 AlTi, CoNiCr 35-20 Mo 10 BTi) for a prolonged contact with skin are evaluated in comparison with two reference austenitic stainless steels 316L and 904L. Several electrochemical parameters were measured and determined (E(oc), E(corr), i(corr), b(a), b(c), E(b), R(p), E(crev) and coulometric analysis) in order to compare the corrosion behavior. The cation release evaluation and in vitro biological characterization also were performed. In terms of corrosion, the results reveal that the 904L steels presented the best behavior followed by the super austenitic steel X1 CrNiMoMnW 24-22-6-3-2 N. For the other two super a…
Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons
2014
Abstract The results of in situ tests carried out on unreinforced and reinforced poor rubble masonry full-scale walls in the earthquake prone Messina (Italy) area are presented and discussed. This experimental research was aimed at the assessment of the in plane shear behaviour of ancient masonry strengthened with an innovative system for masonry and retrofitting of reinforced concrete element constituted by three-dimensional pre-tensioned stainless steel ribbons. A comparison between different strengthening configurations was made in order to characterise the behaviour of masonry panels under shear-compression load, focusing attention on the diagonal cracking failure mode. The effectivenes…
Effect of alloying elements on the electronic properties of thin passive films formed on carbon steel, ferritic and austenitic stainless steels in a …
2014
The influence of alloying elements on the electrochemical and semiconducting properties of thin passive films formed on several steels (carbon steel, ferritic and austenitic stainless steels) has been studied in a highly concentrated lithium bromide (LiBr) solution at 25 °C, by means of potentiodynamic tests and Mott Schottky analysis. The addition of Cr to carbon steel promoted the formation of a p-type semiconducting region in the passive film. A high Ni contentmodified the electronic behaviour of highly alloyed austenitic stainless steels.Mo did notmodify the electronic structure of the passive films, but reduced the concentration of defects.
Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications
2002
Abstract The principle aim of this paper is to investigate three wear-protective coatings with multilayer structures, which are frequently used in the cutting tool industry and to assess their frictional behaviour under the test conditions equivalent to those for the cutting of medium carbon steel. A modified pin-on-disc tester was used to conduct experiments in which both the friction coefficient and the linear wear of the tribo-pair were recorded vs. sliding distance. The volumetric wear rate was proposed as a parameter for quantitative comparison of the wear resistance of the tribo-pairs tested. It was found that the principle stage of the specimen wear takes place during the first 200–2…
Advanced numerical models for the thermo-mechanical-metallurgical analysis in hot forging processes
2013
In the paper a literature review of the numerical modeling of thermo-mechanical-metallurgical evolutions of a metal in hot forging operations is presented. In particular models of multiaxial loading tests are considered for carbon steels. The collected examples from literature regard phases transformations, also martensitic transformations, morphologies evolutions and transformation plasticity phenomena. The purpose of the tests is to show the correlation between the mechanical and the metallurgical behavior of a carbon steel during a combination of several types of loads. In particular a few mechanical tests with heat treatment are analyzed. Furthermore, Ti-6Al-4V titanium alloy is conside…
Heterogeneous crystallization of zinc hydroxystannate on galvanized steel for enhancing the bond strength at the rebar/concrete interface
2021
Abstract Zinc hydroxystannate (ZnSn(OH)6) coatings were deposited on galvanized carbon steel samples by an electroless heterogeneous crystallization process. Structural and morphological features of the coatings as a function of the immersion time were determined by X-ray diffraction, Raman Spectroscopy and Scanning Electron Microscopy revealing the presence of truncated octahedrons of crystalline ZnSn(OH)6. Electrochemical characterization in a simulated concrete pore solution without and with addition of chloride ions proved that the cathodic protection is preserved and that ZnSn(OH)6 improved the corrosion resistance of the rebars. Pull-out tests demonstrated an enhanced bond strength at…
Investigations on friction and wear mechanisms of the PVD-TiAlN coated carbide in dry sliding against steels and cast iron
2006
Abstract The tribological behaviour of the monolayer PVD-titanium aluminium nitride (TiAlN) coated carbide inserts in unidirectional dry sliding against steel and cast iron counterparts was investigated using the pin-on-disc standard test with varying sliding speeds and normal loads. Three different materials of various machinability rates were used as the counterparts, namely the normalised medium carbon steel C45 equivalent to AISI 1045, austenitic stainless steel 1H18N9T equivalent to AISI 304 and gray cast iron EN-GJL-300 with flake-shaped graphite. A pin-on-disc device with round tool inserts was used to conduct friction and wear tests in which both the friction coefficient and the lin…