Search results for "Stiffness"
showing 10 items of 524 documents
Infilled frames: developments in the evaluation of the stiffening effect of infills
2003
In order to consider the modified seismic response of framed structures in the presence of masonry infills, proper models have to be formulated. Because of the complexity of the problem, a careful definition of a diagonal pin-jointed strut, able to represent the horizontal force-interstorey displacement cyclic law of the actual infill, may be a solution. In this connection the present paper shows a generalized criterion for the determination of the ideal cross-section of the strut mentioned before. The procedure is based on the equivalence between the lateral stiffness of the actual infilled frame scheme during the conventional elastic stage of the response and the lateral stiffness of the …
Static strength and fatigue life of optimized hybrid single lap aluminum–CFRP structural joints
2017
Hybrid bolted/bonded joints are used to assemble structural components, commonly made by carbon fiber reinforced plastics (CFRP), with aluminum frames. Hence, they have become common solutions in a number of modern structural applications in the industrial fields, as well as civil constructions. Unfortunately, due to the lack of understanding of the relationships between the multiple parameters of influence that characterize their mechanical performance, only limited improvement have been achieved so far over classical bonding approaches, in terms of static and fatigue strength. As a result, further studies are needed in order to better exploit the potential of hybrid bolted/bonded joints a…
Deformation and failure of MXene nanosheets
2020
This work is aimed at the development of finite element models and prediction of the mechanical behavior of MXene nanosheets. Using LS-Dyna Explicit software, a finite element model was designed to simulate the nanoindentation process of a two-dimensional MXene Ti3C2Tz monolayer flake and to validate the material model. For the evaluation of the adhesive strength of the free-standing Ti3C2Tz-based film, the model comprised single-layered MXene nanosheets with a specific number of individual flakes, and the reverse engineering method with a curve fitting approach was used. The interlaminar shear strength, in-plane stiffness, and shear energy release rate of MXene film were predicted using th…
Thermo-rheological analysis of WMA-additive modified binders
2020
AbstractThermo-rheological characteristics of unmodified and modified bitumen have significant impacts on the mechanical response of asphalt. This study investigates the impacts of an organic and a chemical Warm Mix Asphalt additive on bitumen thermo-rheological and mechanical characteristics. Modified binders with different concentrations of each additive were studied and analysed comparatively to a 40/60 penetration grade bitumen. Frequency sweep tests were performed at different ageing levels to characterise the Linear Viscoelastic properties. The multiple stress creep and recovery, linear amplitude sweep (LAS) and low temperature creep stiffness tests, together with the Glover–Rowe (G–R…
Comparison of spring characteristics of titanium-molybdenum alloy and stainless steel
2017
Background Titanium-molybdenum alloy (TMA) and stainless steel (SS) wires are commonly used in orthodontics as arch-wires for tooth movement. However, plastic deformation phenomenon in these arch-wires seems to be a major concern among orthodontists. This study aimed to compare the mechanical properties of TMA and SS wires with different dimensions. Material and Methods Seventy-two wire samples (36 TMA and 36 SS) of three different sizes (19×25, 17×25 and 16×22) were analyzed in vitro, with 12 samples in each group. Various mechanical properties of the wires, including spring-back, bending moment and stiffness were determined using a universal testing machine. Student’s t-test showed statis…
Stiffness design of laminates using the polar method
2001
This paper is devoted to the analysis of elastic properties of anisotropic laminas using the so-called polar representation method: this is an effective mathematical tool to analyse two-dimensional elastic problems. By this method, the authors have been able to find a particular class of solutions to some special inverse problems concerning laminates made by anisotropic layers. The properties of these solutions are described and discussed, along with some general results.
Flexural behaviour of glulam timber beams reinforced with FRP cords
2015
Abstract Glued laminated timber (glulam) is widely used as a construction material to make up lightweight and large span structures. The basic principle of this material consists in bonding together a number of layers of dimensioned timber with structural adhesives, in order to increase strength and stiffness of the member, and allowing to make up sustainable structures with great visual impact. Recent applications showed the effectiveness of fibre-reinforced polymer (FRP) composites in enhancing the structural performances of glulam beams, with particular reference on their flexural and shear strength. In fact FRP reinforcements could be used to strengthen existing structures or to reduce …
Experimental Characterization of the Properties of Double-Lap Needled and Hybrid Joints of Carbon/Epoxy Composites
2015
The effect of through-thickness reinforcement by thin 1 mm steel needles (z-pins) on the static tensile strength of double-lap joints of a carbon/epoxy composite was investigated. Two types of joints—z-pinned and hybrid (including glued ones)—were considered. The joints were reinforced in the overlap region with 9, 25, or 36 z-pins. Comparing mechanical properties of the double-lap joints with the corresponding characteristics of their unpinned counterparts, the z-pins were found to be highly effective: the strength and stiffness of the pinned joints increased up to 300% and 280%, respectively. These improvements were due to a transition in the failure mechanism from debonding of the joint …
The Use of Atomic Force Microscopy in Determining the Stiffness and Adhesion Force of Human Dentin After Exposure to Bleaching Agents
2009
Introduction: Oxidant bleaching agents may induce several alterations on mineralized teeth tissues. Our aim is to study,at the ultrastructurallevel,mechanicalmodifications induced on dentin after exposure to different bleaching agents.Methods: Nanoindentation performed with atomic force microscopy was used to measure changes in dentin stiffness as well as the adhesion force between the tip and the tissue both in intertubular and peritubulardentin.Foreachspecimen,dentinlocalization, and bleaching agent, 100 independent nanoindentations were performed. Carbamide peroxide (30%) and hydrogenperoxide(35%) wereusedasbleaching agents. Results: A significant reduction of both stiffness and adhesion…
Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites
2020
Fabric Reinforced Cementitious Matrix (FRCM) composites represent an effective, compatible and cost-efficient solution for strengthening and retrofitting existing structures. A strong research effort was done to investigate the tensile and bond properties of these materials, as well as the overall behaviour of strengthened members. A Round Robin Test was organized by Rilem TC 250-CSM on 28 FRCM composites comprising basalt, carbon, glass, PBO, aramid and steel textiles, embedded in either cement, lime or geopolymer mortars, to collect an experimental dataset and define test protocols. This paper collects the outcomes of this study to highlight fundamental properties of FRCM and to investiga…