Search results for "Strip"
showing 10 items of 415 documents
Data quality monitors of vertex detectors at the start of the Belle II experiment
2019
The Belle II experiment features a substantial upgrade of the Belle detector and will operate at the SuperKEKB energy-asymmetric e+e− collider at KEK in Tsukuba, Japan. The accelerator completed its first phase of commissioning in 2016, and the Belle II detector saw its first electron-positron collisions in April 2018. Belle II features a newly designed silicon vertex detector based on double-sided strip layers and DEPFET pixel layers. A subset of the vertex detector was operated in 2018 to determine background conditions (Phase 2 operation). The collaboration completed full detector installation in January 2019, and the experiment started full data taking. This paper will report on the fin…
Fast multi-directional DSLM for confocal detection without striping artifacts
2020
In recent years light-sheet fluorescence microscopy (LSFM) has become a cornerstone technology for neuroscience, improving the quality and capabilities of 3D imaging. By selectively illuminating a single plane, it provides intrinsic optical sectioning and fast image recording, while minimizing out of focus fluorescence background, sample photo-damage and photo-bleaching. However, images acquired with LSFM are often affected by light absorption or scattering effects, leading to un-even illumination and striping artifacts. In this work we present an optical solution to this problem, via fast multi-directional illumination of the sample, based on an acousto-optical deflector (AOD). We demonstr…
Platinum and rhodium associated with the leaves of Nerium oleander L.; analytical method using voltammetry; assessment of air quality in the Palermo …
2009
Abstract A rapid accumulation of the catalytic active noble metals in the environmental and biological matrices was observed and concern arose about potential environmental and health risks. The development of reliable analytic methods to measure very low Pt and Rh concentrations is required. The main purpose of this work was to develop a reliable method for the determination of Pt and Rh in environmental matrices because of inherent difficulties in using conventional techniques used, in particular, the ICP-OES technique. A direct determination of Pt using ICP-MS, for instance, is problematic, due to interfering signals. In this work, differential pulse voltammetry (DPV/a) and adsorptive st…
Potential for microbial diuron mineralisation in a small wine-growing watershed: from treated plots to lotic receiver hydrosystem
2009
BACKGROUND: Since biological degradation processes are known to be a major driver of the natural attenuation of pesticide residues in the environment, microbial communities adapted to pesticide biodegradation are likely to play a key environmental role in reducing pesticide exposure in contaminated ecosystems. The aim of this study was to assess the diuron-mineralising potential of microbial communities at a small-scale watershed level, including a diuron-treated vineyard (pollution source), its associated grass buffer strip (as a river protection area against pesticide runoff) and the lotic receiver hydrosystem (sediments and epilithon), by using radiorespirometry. RESULTS: Comparison of r…
The roles for a Lewis base and MgCl2 in third-generation Ziegler-Natta catalysts
1998
Activity of a titanium catalyst supported on a bimetallic magnesium-aluminium system, involving a Lewis base [MgCl2(THF) 2 /Al(C 2 H 5 ) 2 Cl], was studied in ethylene polymerization, and the effect of the catalyst composition on the properties of the final polymer produced was investigated. Analysis and discussion of the findings covering also some part of the kinetic study, resulted in defining the roles for MgCl 2 and a Lewis base in the third-generation Ziegler-Natta catalysts. MgCl 2 forms a bimetallic complex with an organoaluminium compound, which involves also a Lewis base. Its reaction with TiCl 4 yields a very active catalyst wherein the Mg: Ti molar ratio is close to 1. This mean…
Highly trans-stereospecific Isoprene Polymerization by Neodymium Borohydrido Catalysts
2005
Highly stereospecific polymerization of isoprene was achieved using borohydridoneodymium complexes. In combination with stoichiometric amounts of dialkylmagnesium, Nd(BH4)3(THF)3 (1) and Cp*‘Nd(BH4)2(THF)2 (2) (Cp*‘ = C5Me4nPr) afford very efficient catalysts. The activity reaches 37300 (g of polyisoprene/mol of Nd)/h. Half-lanthanidocene 2 gives rise to polyisoprene, 98.5% trans-regular, the highest content yet described for a homogeneous organometallic catalyst. NMR experiments argue for the formation of bimetallic Nd(μ-BH4)Mg active species.
A Square-Planar Dinickel(II) Complex with a Noninnocent Dinucleating Oxamate Ligand: Evidence for a Ligand Radical Species
1999
[EN] The new bimetallic nickel(II) compound (PPh4)4[Ni2(2)]·6H2O (3), where H8[2] stands for N,N',N'',N'''-1,2,4,5-benzene-tetrayltetrakis(oxamic acid), has been synthesized and its crystal structure determined by single-crystal X-ray diffraction. The structure of 3 consists of [Ni2(n4:n4-2)]4- anions, tetraphenylphosphonium cations, and water molecules. Facile one-electron oxidation of the square-planar diamagnetic dinickel(II) complex [Ni2(n4:n4-2)]4- generates the metallo-radical species [Ni2(n4:n4-2·+)]3- with characteristic intra-ligand ¿cation radical transitions in the visible region (475-550 nm) as well as a typical quasi-isotropic EPR signal at g ¿ 2.0.
Activity of SiO2 supported gold-palladium catalysts in CO oxidation
2003
Abstract Bimetallic Au-Pd catalysts supported on silica with different Au/Pd atomic ratios were prepared by simultaneous reduction of palladium and gold precursors by ethanol in the presence of the polymer, polyvinylpyrrolidone (PVP). Formation of alloyed particles was detected by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and CO chemisorption measurements. The catalysts were tested in the catalytic oxidation of CO using a plug–flow reactor. The CO conversion was determined as a function of temperature. The monometallic palladium and the palladium-rich catalysts behaved quite similarly and were the most active catalysts. …
Study of the synergistic interaction between nickel, gold and molybdenum in novel modified NiO/GDC cermets, possible anode materials for CH4 fueled S…
2013
Abstract The present study concerns the structural and physicochemical characterization of novel Au–Mo–NiO/GDC cermets, alongside with measurements of their carbon tolerance. This is an investigation on whether commercially available NiO/GDC powder that is modified with Au and/or Mo can yield possible electrocatalysts as anodes for CH4 fueled SOFCs. Specifically, the performed preparation methods of deposition-precipitation and deposition-coprecipitation permitted the modification of a commercial electrocatalyst and lead to cermets that exhibit different reaction kinetics for the catalytic dissociation of CH4 and different performance for CH4 steam reforming. The most interesting structural…
Patterning of Magnetic Bimetallic Coordination Nanoparticles of Prussian Blue Derivatives by the Langmuir–Blodgett Technique
2012
We report a novel method to prepare patterns of nanoparticles over large areas of the substrate. This method is based on the adsorption of the negatively charged nanoparticles dispersed in an aqueous subphase onto a monolayer of the phospholipid dipalmitoyl-l-α-phosphatidylcholine (DPPC) at the air-water interface. It has been used to prepare patterns of nanoparticles of Prussian blue analogues (PBA) of different size (K(0.25)Ni[Fe(CN)(6)](0.75) (NiFe), K(0.25)Ni[Cr(CN)(6)](0.75) (NiCr), K(0.25)Ni[Co(CN)(6)](0.75) (NiCo), Cs(0.4)Co[Cr(CN)(6)](0.8) (CsCoCr), and Cs(0.4)Co[Fe(CN)(6)](0.9) (CsCoFe)). The behavior of DPPC monolayer at the air-water interface in the presence of the subphase of P…