Search results for "Surface finish"
showing 10 items of 167 documents
A new and simplified approach to assess the pavement surface micro- and macrotexture
2017
Abstract Road safety depends on pavement skid resistance and surface texture. Skid resistance mainly depends on micro-texture and macrotexture. Skid and texture measurements on samples, in the laboratory, at the preliminary stage of the design, would enhance the design in terms of timing, costs, and reliability. Consequently, this study aims at setting up and validating simple methods for assessing surface texture and skid resistance based on core/sample measurements. Experiments were carried out and predictive relationships were set up to explain and predict results. Under given conditions, miniaturised macro-and microtexture tests (modified EN 13036-1 and modified EN 13036-4, respectively…
The analysis and selection of the spinning disk system parameters for the measurement of static electrification of insulation oils
2007
The paper presents results the aim of which was determining the most favorable conditions of ECT (electrostatic charge tendency) measurement taking of insulation oils in the spinning disk system. The work proved that a proper selection of the size and roughness of the disk surface makes the measured volume density of charge qw independent of the hydrodynamic conditions in the measuring system on the solid and liquid phase border. Charge qw density meets then the criterion of a material coefficient and can be used for comparing the results obtained from the systems varying in dimensions and hydrodynamic conditions. The changes suggested also ensure a high repeatability and reproducibility of…
Hydraulic jumps on rough beds
2007
This paper presents the results of an experimental investigation on the hydraulic jump on horizontal rough beds. Experiments were carried out to study the effect of bed roughness on both the sequent depth ratio and the roller length. The investigation allowed the writers to positively test the reliability of a new solution of the momentum equation for the sequent depth ratio as a function of the Froude number and the ratio between the roughness height and the upstream supercritical flow depth. The applicability of some empirical relationships for estimating the roller length was also tested.
Effect of surface finish on the mechanical behaviour of Dacron© 360 woven
2013
Abstract In the present paper some experimental analyses of Dacron© 360 woven with and without surface treatment are presented to evaluate the effect of this treatment on the constitutive behaviour. This woven, widely adopted in sail manufacturing, is obtained by weaving polyethylene terephthalate (PET) yarn and it shows some peculiar features due to the manufacturing process. The experimental tensile tests, clearly show the orthotropy behaviour of the material. The effect of the treatment results in a stiffer behaviour especially along the warp and bias direction and in an increment of ultimate strength in all directions.
Effects of the cluster surface on the electronic shell structure: faceting, roughness and softness
1995
Several simple models have been used to study the effects of the surface on the electronic shell structure in metal clusters. The main results are as follows: The icosahedral clusters have the same electronic shell structure as the sphere up to about 1000 atoms. The surface roughness causes the distribution of the level spacings to be a Wigner distribution. By varying the softness of the potential we can obtain potentials where the simplest classical orbits are the ‘five-point star’ or even ‘the three-point star’.
Flow resistance in gravel-bed channels with large-scale roughness
2003
A previously published mixing length (ML) model for evaluating the Darcy–Weisbach friction factor for a large-scale roughness condition (depth to sediment height ratio ranging from 1 to 4) is briefly reviewed and modified (MML). Then the MML model and a modified drag (MD) model are experimentally tested using laboratory measurements carried out for gravel-bed channels and large-scale roughness condition. This analysis showed that the MML gives accurate estimates of the Darcy–Weisbach coefficient and for Froude number values greater than 0·5 the MML model coincides with the ML one. Testing of the MD model shows limited accuracy in estimating flow resistance. Finally, the MML and MD models are com…
Effects of irregular two-dimensional and three-dimensional surface roughness in turbulent channel flows
2012
Abstract Wall-resolved Large Eddy Simulation of fully developed turbulent channel flows over two different rough surfaces is performed to investigate on the effects of irregular 2D and 3D roughness on the turbulence. The two geometries are obtained through the superimposition of sinusoidal functions having random amplitudes and different wave lengths. In the 2D configuration the irregular shape in the longitudinal direction is replicated in the transverse one, while in the 3D case the sinusoidal functions are generated both in streamwise and spanwise directions. Both channel walls are roughened in such a way as to obtain surfaces with statistically equivalent roughness height, but different…
Numerical observations of turbulence structure modification in channel flow over 2D and 3D rough walls
2015
Abstract The effects of wall roughness on turbulence structure modifications were explored by numerical experiments, carried out using Large Eddy Simulation techniques. The wall geometry was made using an archetypal artificial method, thus to achieve irregular two- and three-dimensional shapes. The proposed roughness shapes are highly irregular and are characterised by high and small peaks, thus it can be considered a practical realistic roughness. Their effects are analysed comparing the turbulence quantities over smooth, 2D and 3D rough walls of fully developed channel flow at relatively low friction Reynolds number Re τ = 395 . Both transitional and fully rough regimes have been investig…
Large Eddy Simulations of Rough Turbulent Channel Flows Bounded by Irregular Roughness: Advances Toward a Universal Roughness Correlation
2020
The downward shift of the mean velocity profile in the logarithmic region, known as roughness function, $$\Delta U^+$$ , is the major macroscopic effect of roughness in wall bounded flows. This speed decrease, which is strictly linked to the friction Reynolds number and the geometrical properties which define the roughness pattern such as roughness height, density, shape parameters, has been deeply investigated in the past decades. Among the geometrical parameters, the effective slope (ES) seems to be suitable to estimate the roughness function at fixed friction Reynolds number, Re $$_{\tau }$$ . In the present work, the effects of several geometrical parameters on the roughness function, i…
Large eddy simulations on the effect of the irregular roughness shape on turbulent channel flows
2019
Abstract Large Eddy Simulations (LES) are carried out to investigate on the mean flow in turbulent channel flows over irregular rough surfaces. Here the attention is focused to selectively investigate on the effect induced by crests or cavities of the roughness. The irregular shape is generated through the super-imposition of sinusoidal functions having random amplitude and four different wave-lengths. The irregular roughness profile is reproduced along the spanwise direction in order to obtain a 2D rough shape. The analysis of the mean velocity profiles shows that roughness crests induce higher effect in the outer-region whereas roughness cavities cause the highest effects in the inner-reg…