Search results for "Surfaces"
showing 10 items of 2837 documents
Imbibition of Femtoliter-Scale DNA-Rich Aqueous Droplets into Porous Nylon Substrates by Molecular Printing
2019
This work presents the first reported imbibition mechanism of femtoliter (fL)-scale droplets produced by microchannel cantilever spotting (μCS) of DNA molecular inks into porous substrates (hydrophilic nylon). Differently from macroscopic or picoliter droplets, the downscaling to the fL-size leads to an imbibition process controlled by the subtle interplay of evaporation, spreading, viscosity, and capillarity, with gravitational forces being quasi-negligible. In particular, the minimization of droplet evaporation, surface tension, and viscosity allows for a reproducible droplet imbibition process. The dwell time on the nylon surface permits further tuning of the droplet lateral size, in acc…
Curing of an epoxy resin modified with nanoclay monitored by dielectric spectroscopy and rheological measurements
2006
Dielectric and rheological measurements have been performed in “real-time” to follow curing reaction on blends of a diglycidyl ether of bisphenol-A epoxy resin with 4,4-methylene bis(2,6-diethylaniline) hardener and different amounts of organically modified nanoclay (Nanofil 919) as modifier. The effect of the modifier and its amount on the curing reaction, as well as that of the curing temperature has been studied. Changes in molecular mobility in the reaction mixture have been investigated by dielectric relaxation spectroscopy. Evolutions of ionic conductivity and main relaxation have been analyzed and vitrification times have been obtained and compared with those obtained by rheological …
Torsional Bias as a Strategy To Tune Singlet–Triplet Gaps in Organic Diradicals
2018
Quinoidal compounds with proaromatic structures possess differing degrees of diradical character, where the open-shell diradical resonance form has restored aromaticity throughout the compound. Methods to tune the diradical character of these compounds have traditionally focused on altering the length and the molecular composition of the π-conjugated backbones. However, other molecular design strategies to tune the singlet–triplet gap of π-conjugated quinoidal molecules have not been extensively explored. We previously reported a strikingly small energy gap between the quinoidal and diradical states of a quinoidal small molecule containing methano[10]annulene (TMTQ) that was dictated in lar…
C-, N-, S-, and Fe-Doped TiO2 and SrTiO3 Nanotubes for Visible-Light-Driven Photocatalytic Water Splitting: Prediction from First Principles
2015
The ground state electronic structure and the formation energies of both TiO2 and SrTiO3 nanotubes (NTs) containing CO, NO, SO, and FeTi substitutional impurities are studied using first-principles calculations. We observe that N and S dopants in TiO2 NTs lead to an enhancement of their visible-light-driven photocatalytic response, thereby increasing their ability to split H2O molecules. The differences between the highest occupied and lowest unoccupied impurity levels inside the band gap (HOIL and LUIL, respectively) are reduced in these defective nanotubes down to 2.4 and 2.5 eV for N and S doping, respectively. The band gap of an NO+SO codoped titania nanotube is narrowed down to 2.2 eV …
Growth and characterization of AP-MOCVD iron doped titanium dioxide thin films
1999
Abstract Atmospheric pressure metal organic chemical vapor deposition (AP-MOCVD) was used to prepare iron doped titanium dioxide thin films. Thin films, between 40 and 150 nm thick, were deposited on Si, SiO 2 and Al 2 O 3 substrates using titanium tetra isopropoxide and ferrocene as metal organic precursors. TiO 2 iron doping was achieved in the range of 1–4 at.%. The film morphology and thickness, polycrystalline texture and doping content were studied using respectively scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The influence of growth temperature, deposition time, substrate type and dopant partial pressure were studied. Electr…
Yttrium-doped hematite photoanodes for solar water splitting: Photoelectrochemical and electronic properties
2018
Abstract We investigate yttrium-doped hematite thin-film photoelectrochemical properties and find yttrium incorporation to amply improve the performance as a photoanode for water splitting under visible light. We used the spray pyrolysis method to prepare a set of yttrium doped Fe2-xYxO3 (x = 0, 0.05, 0.10, 0.15, 0.2) thin films (thickness below 500 nm) on glass and transparent conductive oxide coated glass slides. Using a substitutional homovalent (Y3+) dopant, the effect on functionality is rationalised as a combined effect on the electronic structure and small polaron mobility from the lattice structure, impurity levels, lattice stability and variance in hybridisation. The photoelectroch…
Mn2+-induced room-temperature ferromagnetism and spin-glass behavior in hydrothermally grown Mn-doped ZnO nanorods
2014
The magnetic properties of Mn-doped ZnO (ZnO:Mn) nanorods grown by hydrothermal process at a temperature of 200 °C and a growth time of 3 h have been studied. The samples were characterized by using powder X-ray diffraction with Rietveld refinement, scanning electron microscopy, energy-dispersive X-ray analysis and SQUID magnetometry. Mn (3 wt%) and (5 wt%)-doped ZnO samples exhibit paramagnetic and ferromagnetic behavior, respectively, at room temperature. The spin-glass behavior is observed from the samples with respect to the decrease of temperature. At 10 K, both samples exhibit a hysteresis loop with relatively low coercivity. The room-temperature ferromagnetism in 5 wt% Mn-doped ZnO n…
Effects of Grain Boundary Decoration on the Electrical Conduction of Nanocrystalline CeO2
2012
In this study, we investigate the effect of decorating the grain boundaries of nanocrystalline undoped ceria on the electrical transport properties. For the decoration, different acceptors (Yb, Y, Bi) were chosen. On decoration, the conduction switches from electronic to ionic. Upon sintering the grains are characterized by a core-shell configuration, in which the core remains undoped while the shell is heavily doped as a consequence of the diffusion of the acceptors toward the grain interior. The shell dominates the overall transport properties of the nanocrystalline ceria and is found to be in the mesoscopic regime.
Soft X-ray emission spectroscopy used for the characterization of a-C and CNx thin films
2015
Abstract We present the results of a soft X-ray emission spectroscopy study of a-C and CNx films on a Si(100) substrate. Also for the characterization of the homogeneity in depth of these films electron energy loss spectroscopy measurements with localization better than 4 nm were carried out. In case of CNx films the highest diamond-like modification occurs in the region close to the Si(100) substrate. The film density decreases with increasing distance from the substrate and becomes almost constant in range of thicknesses more than ~ 2 nm.
Near-Infrared Emission of O2 Embedded in Amorphous SiO2 Nanoparticles
2011
We report an experimental study on the emission properties of O2 molecules loaded by a thermal diffusion process at 200 °C into high-purity silica nanoparticles with mean diameters of 7 and 40 nm. The embedded O 2 features a singlet to triplet emission band peaked at 1272 nm in agreement with the band observed for bulk silica materials. The photoluminescence excitation spectra have been determined in the visible and in the infrared range and are characterized by narrow bands peaked at 691, 764, and 1069 nm, respectively. By comparison of the transition energies, the vibrational quanta have been determined for the ground and for both the excited states; the values found are lower than the co…