Search results for "Surfaces"
showing 10 items of 2837 documents
Metal-support interaction and redox behavior of Pt(1 wt %)/Ce0.6Zr0.4O2
2006
The catalyst Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is studied by CO-temperature programmed reduction (CO-TPR), isothermal oxygen storage complete capacity (OSCC), X-ray absorption spectroscopy (XAS) at the Pt L(III) edge, and in situ X-ray diffraction (in situ XRD), with the aim of elucidating the role of supported metal in CO oxidation by ceria-based three-way catalysts (TWC). The redox behavior of Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is compared to that of bare ceria-zirconia. OSCC of redox-aged Pt/ceria-zirconia is twice that of bare ceria-zirconia, and the maximum of CO consumption occurs at a temperature about 300 K lower than redox-aged ceria-zirconia. XAS analysis allows one to evidence the formati…
Chemical microimaging and microspectroscopy of surfaces with a photoemission microscope
1997
We applied element sensitive photoemission electron microscopy (PEEM) to investigate surfaces of devices built from complex materials. Conventional PEEM suffers from lack of information about the chemical composition of the imaged surface. Such information can be obtained by PEEM via tuning the photon energy to X-ray absorption edges. To apply spectromicroscopy we acquired and subtracted microscopic images using photon energies just below and at the edges. The resulting difference gives a micro-image of the lateral distribution of a specific element. Microspectroscopy is performed by recording the intensity of secondary electrons in selected spots during a sweep of the photon energy. We app…
The lateral variation of solid state reactions at surfaces studied by means of photoemission electron microscopy: formation of titanium silicides
2001
The alloying and oxygen reduction at titanium silicon interfaces were studied by means of photoemission microscopy. The microscopic chemical composition of the sample surface was characterised by means of imaging X-ray absorption. The silicide formation was studied at clean and oxidised silicon substrates both covered with micron-sized titanium patterns.
Structure and composition of sputter-deposited nickel-tungsten oxide films
2011
Films of mixed nickel-tungsten oxide, denoted NixW1-x oxide, were prepared by reactive DC magnetron co-sputtering from metallic targets and were characterized by Rutherford backscattering spectrometry. X-ray photoelectron spectroscopy, X-ray diffractometry and Raman spectroscopy. A consistent picture of the structure and composition emerged, and at x<0.50 the films comprised a mixture of amorphous WO3 and nanosized NiWO4, at x = 0.50 the nanosized NiWO4 phase was dominating, and at x>0.50 the films contained nanosized NiO and NiWO4.
Local Structure of Supported Keggin and Wells-Dawson Heteropolyacids and Its Influence on the Catalytic Activity
2019
[EN] Keggin [PW12O40]3– and Wells–Dawson [P2W18O62]6– heteropolyanions are nanosized transition-metal-oxygen clusters belonging to the heteropolyacids (HPAs) family. They are widely used as catalysts due to their high Brønsted acidity, and their dispersion on solid supports favors the accessibility to their acid sites generally increasing the catalytic activity. A series of binary materials composed of Keggin or Wells–Dawson HPAs and SiO2, TiO2, and ZrO2 have been prepared by impregnation or solvothermal methods. Remarkable differences have been found in the catalytic activities among the unsupported and supported HPAs. These differences have been correlated in the past to the structural ch…
EBIT diagnostics using X-ray spectra of highly ionized Ne
2003
We have carried out a detailed analysis of highly ionized neon spectra collected at the NIST EBIT using an NTD germanium X-ray microcalorimeter developed at the Harvard-Smithsonian Center for Astrophysics [Nucl. Instr. and Meth. A 444 (2000) 156]. Our attention was focused especially on the Ne IX He-like triplet to check electron density diagnostics through the intercombination/forbidden line ratio. We have investigated possible effects of the ion dynamics on the plasma emission line intensities, looking at the dependence of the count-rate and the charge state distribution on the electron beam energy and current. The temperature and spatial distribution of the neon ions, and hence the overl…
Using photoelectron emission microscopy with hard-X-rays
2001
We present several successful test cases of using photoelectron emission microscopy (PEEM) for photon energy up to 25 keV. First, the full extended X-ray absorption fine structure analysis was implemented in areas as small as 100 mum(2) for transition-metal K edge absorption spectra and, therefore, demonstrated the feasibility of combining structural and chemical analysis with hard-X-ray absorption spectroscopy with high lateral resolution. We also show that PEEM can be used in a transmission (radiography) mode as an imaging detector for hard-X-ray, This approach again leads to the unprecedented 0.3 mum lateral resolution, particularly critical for the use of coherence-based phase contrast …
Urea Glass Route as a Way to Optimize YAGG:Ce3+,Cr3+,Pr3+ Nanocrystals for Persistent Luminescence Applications
2022
A new approach for the synthesis of Y3Al2Ga3O12 (YAGG) nanophosphors allowing the preparation of crystallites with sizes starting from 45 nm is presented. The controllability of the energy and trap density of the resulting material samples by annealing temperature was confirmed by thermoluminescence (TL) measurements. It has been shown that the annealing of samples at temperatures up to 1300 degrees C does not cause any substantial growth of crystallites, still remaining below 100 nm, but leads to changes in the activation energy of the persistent luminescence (PersL) process. On the other hand, annealing above 1400 degrees C results in grain growth on the submicron scale, which was confirm…
Acoustic vibrations of metal nanoparticles: high order radial mode detection
2004
The vibrational radial modes of silver nanospheres embedded in a glass matrix are investigated using a high sensitivity femtosecond pump-probe technique. The results yield evidence for coherent launching of the fundamental and higher order radial modes in agreement with a sphere dilation mediated excitation model. The results are consistent with low-frequency Raman scattering experiments.
Relations between cavitation erosion resistance of materials and their fatigue strength under random loading
1999
Abstract The paper contains results of tests on fatigue strength under uniaxial random loading and cavitation erosion resistance for three steels: 10HNAP, 18G2A and 15G2ANb. The obtained fatigue and cavitation characteristics were used for determination of relations between these two phenomena. From the analysis it appears that there is correlation between fatigue strength of the material under random loading and its cavitation erosion resistance. It has been shown that fatigue tests under random loading and tests on cavitation erosion of 10HNAP, 18G2A and 15G2ANb steels may be described with a mathematical model of the same type. It has been also found that there is a linear relation, in t…