Search results for "TRID"
showing 10 items of 753 documents
Cathodoluminescence and structural studies of nitrided 3D gallium structures grown by MOCVD
2009
Abstract Cathodoluminescence (CL) spectrum imaging and grazing incidence X-ray diffraction (GIXRD) are employed to investigate nitride three-dimensional (3D) gallium structures. The metallic precursors are naturally obtained on a large variety of substrates by metal-organic chemical vapor deposition (CVD) with different shape/size controlled by the growth conditions, especially the temperature. These 3D metallic structures are subsequently exposed to a nitridation process in a conventional CVD reactor to form GaN nanocrystals, as confirmed by GIXRD measurements. CL spectroscopy shows visible light emission (2.5–2.8 eV) excited from the GaN in the 3D structures.
An Investigation into the Stability of Graphitic C 3 N 4 as a Photocatalyst for CO 2 Reduction
2018
The increasing CO 2 concentration in the atmosphere exerts a significant influence on global warming and climate change. The capture and utilization of CO 2 by conversion to useful products is an area of active research. In this work, the photodriven reduction of CO 2 was investigated using graphitic carbon nitride (g-C 3 N 4 ) as a potential photocatalyst. The photocatalytic reduction of CO 2 was investigated with g-C 3 N 4 powder immobilized on a glass support in a batch gas-phase photoreactor. The experiments were carried out under UV-vis irradiation at 70 °C and an initial pressure of 2.5 bar. The only gas-phase product detected during the irradiation of the g-C 3 N 4 in the presence of…
Solvent features of cluster single-wall C, BC2N and BN nanotubes, cones and horns
2013
Graphical abstractDisplay Omitted Highlights? It is discussed single-wall carbon, BC2N and BN nanocones in organic solvents in cluster form. ? Theory is developed based on a cluster bundlet model describing distribution function by size. ? There is explanation in which (BC2N/BN-)SWNC free energy is combined from two components. ? Bundlet model enables describing the distribution function of (BC2N/BN-)SWNC clusters by size. ? From purely geometrical differences, bundlet and droplet models predict different behaviours. It is discussed the existence of single-wall carbon nanocones (SWNCs), especially nanohorns (SWNHs), and BC2N/boron nitride (BN) analogues in organic solvents in cluster form; …
Polymeric carbon nitride (C3N4) as heterogeneous photocatalyst for selective oxidation of alcohols to aldehydes
2018
Abstract Polymeric carbon nitride (C3N4) is a semiconductor material which is a very promising green photocatalyst with good physico-chemical properties and stability. It is a metal-free carbon based non-toxic material which can be easily obtained from earth-abundant components. The robustness and versatility of C3N4 as a photo-redox catalyst allows its use for selective oxidations by heterogeneous photocatalysis. This paper reviews the state of art in the application of C3N4 as heterogeneous photocatalyst for selective oxidation of alcohols to the corresponding aldehydes.
CO2 to Liquid Fuels: Photocatalytic Conversion in a Continuous Membrane Reactor
2018
The photocatalytic reduction of CO, into value-added chemicals using sunlight is a promising approach to promote energy-bearing products, mitigating the adverse effects of anthropogenic CO2 emissions. In this work, exfoliated C3N4 was incorporated into Nafion matrix and used in a continuous photocatalytic reactor for converting CO2 into liquid fuels. Comprehensive structural and morphological diffuse reflectance spectroscopy (DRS), FT-IR, ATR-IR, and SEM measurements were performed for C3N4-loaded Nafion membrane and then compared with those of a Nafion membrane without any catalyst. The synergic effect of C3N4 organic catalyst embedded in a Nafion dense matrix and a continuous operating mo…
Enhancement of calcium copper titanium oxide photoelectrochemical performance using boron nitride nanosheets
2020
International audience; Photoelectrochemical water splitting under visible light has attracted attention for renewable hydrogen production. Despite prevalent investigations, many challenges still hindered an efficient energy conversion, such as enhancing the reaction efficiency in visible light. Thus controlling the photoelectrode materials is an essential step in designing new materials for water splitting. CaCu3Ti4O12 (CCTO) has received great attention as photocatalyst under solar light due to its combined band gap as result of the presence in its structure of TiO2 active in UV light and CuO active under visible light. In this work, a cubic CCTO with different amount of exfoliated hexago…
Comparison between preparative methodologies of nanostructured carbon nitride and their use as selective photocatalysts in water suspension
2017
Carbon nitride photocatalysts have been prepared by different methodologies, such as chemical ultrasonic irradiation (sonochemical treatment), hydrothermal and ball milling and thermoexfoliation, and have been used for the selective oxidation of 5-hydroxymethyl-2-furaldehyde (HMF) to form 2,5-furandicarboxyaldehyde (FDC) in water suspension both under UV and natural solar irradiation. The physico-chemical features of the photocatalysts have been studied by X-ray diffraction, infrared spectroscopy, UVâVis diffuse reflectance spectroscopy, photoluminescence spectroscopy, scanning electron microscopy, and specific surface area measurements. The results indicate that exfoliation of carbon nit…
Heterogeneous photocatalytic materials for sustainable formation of high-value chemicals in green solvents
2021
Abstract The most investigated materials used as heterogeneous photocatalysts for the formation of high-value chemicals under mild experimental conditions are presented in this survey. Only papers reporting reactions carried out in harmless solvents such as water, the green solvent par excellence, are reported. Metal oxides have been used often, but carbon-based materials such as carbon nitride and graphene, metal nanoparticles, sulphides and selenides also have received a great attention mainly due to their good performances both in partial oxidations and reductions. The results presented indicate that an appropriate choice of the photocatalytic material is the main problem to be faced to …
Soft X-ray emission spectroscopy used for the characterization of a-C and CNx thin films
2015
Abstract We present the results of a soft X-ray emission spectroscopy study of a-C and CNx films on a Si(100) substrate. Also for the characterization of the homogeneity in depth of these films electron energy loss spectroscopy measurements with localization better than 4 nm were carried out. In case of CNx films the highest diamond-like modification occurs in the region close to the Si(100) substrate. The film density decreases with increasing distance from the substrate and becomes almost constant in range of thicknesses more than ~ 2 nm.
Effects of Pressure, Thermal Treatment, and O2 Loading in MCM41, MSU-H, and MSU-F Mesoporous Silica Systems Probed by Raman Spectroscopy
2015
We present a Raman study of the effects induced by pressure, thermal treatments, and O2 loading in MCM41, MSU-H, and MSU-F representative mesoporous silica. We compared the starting powders with the mechanically pressed tablets produced applying pressures of ∼0.2 and ∼0.45 GPa. The spectra of the three untreated tablets evidence that the main value of the Si-O-Si angle decreases and that in the MCM41 and the MSU-H Si-O-Si hydrolysis occurs, whereas such a process is absent or much less efficient in the MSU-F. Despite their different networks, the three powders tend to crystallize in cristobalite when treatments are at 1000 °C. The MCM41 and MSU-H tablets exhibit behavior similar to their st…