Search results for "Thermal Stability"
showing 10 items of 262 documents
Reactive blending of a functionalized polyethylene with a semiflexible liquid crystalline copolyester
1996
Reactive blends (50/50 w/w) of a low molar mass polyethylene containing free carboxylic groups (PEox) and a semiflexible liquid crystalline polyester (SBH 1 : 1 : 2, by Eniricerche) have been prepared at 240 degrees C in a Brabender mixer, in the presence of Ti(OBu)(4) catalyst, for different mixing times (15, 60, and 120 min). In order to prove the formation of a PE-g-SBH copolymer, the blends have been fractionated by successive extractions with boiling toluene and xylene. The soluble fractions and the residues have been analyzed by Fourier transform infrared (FTIR) spectroscopy, thermogravimetry (TG and DTG), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM)…
Organic salts and aromatic substrates in two-component gel phase formation: the study of properties and release processes
2015
To identify gel phases able to act as confined reaction media or materials for the removal of organic pollutants, we studied two-component gel phases formed by naphthalenedisulfonate diimidazolium salts in the presence of some organic guests, in 1-propanol solution. Guests differing in π-surface area, bulkiness and electronic properties were taken into account. Soft materials obtained were investigated for their thermal stability, self-repairing ability and morphology. Furthermore, two-component gel phase formation was studied using resonance light scattering (RLS) measurements. Guest release processes from the gel phase were also studied. These processes were monitored as a function of tim…
A rapid and eco-friendly route to synthesize graphene-doped silica nanohybrids
2016
International audience; In the present study, the possibility to synthesize graphene oxide (GO)-based nanohybrids with pure and O2-doped silica nanoparticles by a rapid and easy hydrothermal process has been explored. The nanohybrids were prepared by varying the type of silica nanoparticles (average diameter 7 nm or 40 nm) and the silica/GO weight ratio. All the materials were fully characterized by spectroscopic and morphological techniques.The experimental results revealed that it is possible to tune the characteristics of the obtained nanohybrids, such as morphology and amount of ester/ether linkages upon varying the preparation parameters, together with the nanosilica's typology and the…
Morphology, mechanical properties and thermal degradation kinetics of PMMA-zirconia nanocomposites prepared by melt compounding
2012
Zirconia nanoparticles were synthesized by means of a sol-gel method and embedded in poly(methyl methacrylate) (PMMA) by melt compounding. The zirconia was well dispersed in the PMMA matrix, with only a few clusters, especially for the highest investigated zirconia content. NMR results showed heteronuclear dipolar interactions involving the carbons and the surrounding hydrogen nuclei. The effect of the amount of zirconia, in the range of 1–5!wt%, on the thermomechanical properties and thermal degradation kinetics of PMMA was also investigated by means of dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), and Fourier-transform infrared spectroscopy (FTIR). The presenc…
Hybrid Nanocomposite Coatings for Application in Construction Materials: Tribological Study
2009
The Nanocomposite group of AIDICO and the Nanomaterials Group of University of Valencia collaborate in the research of new organic-inorganic hybrid materials with application in construction products. Tribological properties and good thermal stability are some of the required specifications for such applications. Some hybrid coatings based on simultaneous formation of epoxy and silica networks are introduced in this work. Elastic modulus and hardness obtained from TDMA analyses and indentation techniques, together with thermal stability by TGA, are the main properties analysed in order to fulfil the requirements for construction coating applications. New routes for obtaining these coatings …
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate
2012
Abstract Polycarbonate/silica nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate (PC) was investigated. Clusters of silica nanoparticles were well dispersed in the polycarbonate whose structure remained amorphous. NMR results showed intermolecular interactions involving the carbonyl groups of different polymeric chains which did not affect the intramolecular rotational motions. The presence of the lowest silica content showed a decrease in the storage and loss moduli below the glass transition temperature, pro…
Particle surface engineering effect on the mechanical, optical and photoluminescent properties of ZnO/vinyl-ester resin nanocomposites
2007
Zinc oxide (ZnO) nanoparticles functionalized with a bi-functional coupling agent methacryloxypropyl-trimethoxysilane (MPS) were used to fabricate a vinyl-ester resin polymeric nanocomposite, which shows an improved interfacial interaction between the particle and matrix. As a result, in comparison to the unmodified particle-filled nanocomposites, the functionalized particle-filled composites possessed higher resistance to thermal degradation, and demonstrated improved UV shielding and enhanced photoluminescent properties. The more uniform particle dispersion, passivation of the particle surface with MPS and increased oxygen vacancies were justified to contribute to the increased thermal st…
Morphology, flexural, and thermal properties of sepiolite modified epoxy resins with different curing agents
2006
A bisphenol A-based epoxy resin was modified with 5 wt% organically modified sepiolite (Pangel B40) and thermally cured using two different curing agents: an aliphatic diamine (Jeffamine D230, D230) and a cycloaliphatic diamine (3DCM). The morphology of the cured materials was established by scanning and transmission electron microscopy analysis. The thermal stability, thermo-mechanical properties, and flexural behaviour of the sepiolite-modified matrices were evaluated and compared with the corresponding neat matrix. The initial thermal decomposition temperature did not change with the addition of sepiolite. The flexural modulus of the epoxy matrix slightly increases by the incorporation o…
Intercalation effects in LDPE/o-Montmorillonites nanocomposites
2007
Abstract Typical montmorillonite clays (Cloisite ® Na + , Cloisite ® 30B) were modified by treatment with octadecyl ammonium chloride (ODC) and successive additions of octadecylamine (ODA). XRD analyses of the modified clays indicated an increase of the basal spacing of the (0 0 1) planes depending on the ODC or ODA additions. Nanocomposites were prepared by dispersing the modified clays (3% w/w concentration) in LDPE, using a Brabender mixer. XRD measurements of the obtained products indicated in some cases the achievement of intercalation effects, which were confirmed by TEM analysis. Some thermal, mechanical, dynamic-mechanical and rheological properties were evaluated and correlated to …
Controlling dielectrical properties of polymer blends through defined PEDOT nanostructures
2016
[EN] The paper reports the crucial role of the morphology of poly(3,4-ethylenedioxythiophene) (PEDOT) nanostructures on the thermal and dielectric properties of polymer blends prepared thereof. PEDOT nanostructures with two different morphologies (nanoparticles and nanowires) were synthesized. The size for the nanoparticles was in the range 10 40 nm and the diameter of the nanowires was of ca. 200 nm. These nanostructures were blended with an insulating polymer matrix, poly(methyl methacrylate) (PMMA), to evaluate the dielectrical properties of the materials. The results of broadband dielèctric spectroscopy showed a strong correlation between the morphology of the nanostructure and the impr…