Search results for "Thermal"

showing 10 items of 3576 documents

Physical Properties of Ba0.95Pb0.05TiO3+0.1%Co2O3

2012

The single-phase perovskite structure of the Ba0.95Pb0.05TiO3+0.1%Co2O3 ceramics was confirmed by the X-ray diffraction method. Microstructural studies revealed that the samples were of good quality and chemically homogeneous. The thermal behaviour of ceramics was studied using the in situ high-temperature X-ray synchrotron powder diffraction investigation. The energy gap of about 3.2 eV was estimated using a reflectance spectroscopy. Measurements showed the influence of Pb and Co on the character of phase transition in the BaTiO3 structure. The results were compared to the ones obtained for pure BaTiO3.

DiffractionIn situPhase transitionMaterials scienceBand gapDopingAnalytical chemistryCondensed Matter PhysicsElectronic Optical and Magnetic Materialsvisual_artThermalvisual_art.visual_art_mediumCeramicPerovskite (structure)Ferroelectrics
researchProduct

Thermal expansion of LiZr2(PO4)3: Water inclusion influence

1989

Abstract Lattice thermal expansion has been measured on three samples of composition LiZr 2 (PO 4 ) 3 , prepared by (i) a ceramic method, (ii) a gel-route and (iii) a nonstoichiometric ceramic. The first sample is monoclinic (?), with a transition at 50°C to rhombohedral. The second is clearly monoclinic with lattice parameters depending on the calcination temperature (700 to 1200°C. The third kind of synthesis yielded a new PO 4 -deficitary rhombohedral structure. X-ray diffraction measurements in a high temperature camera have been made from room temperature up to 1100°C. Lattice parameters, as well as their dependence on temperature are different for the three samples. While thermal expa…

DiffractionMaterials scienceAnalytical chemistryMineralogyGeneral ChemistryTrigonal crystal systemCondensed Matter PhysicsThermal expansionlaw.inventionlawvisual_artLattice (order)visual_art.visual_art_mediumGeneral Materials ScienceCalcinationCeramicMonoclinic crystal systemSolid State Ionics
researchProduct

Influence of Lithium Substitution on Structure, Electric and Pyroelectric Properties of Sodium Niobate Ceramics

2012

Li0.02Na0.98NbO3 ceramics were prepared by a conventional method. A single-phase perovskite structure was identified by an X-ray diffraction method. The SEM and EDS studies revealed that the Li0.02Na0.98NbO3 samples were perfectly sintered and chemically homogeneous. Electric measurements showed that Li0.02Na0.98NbO3 was sensitive to the frequency of the applied electric field and revealed that the ac conductivity changed with frequency according to the formula: σ(ω) = σdc +Aωn where n < 1. These results were discussed with a reference to the conduction mechanism as a type of polaron hopping.

DiffractionMaterials scienceAnalytical chemistrychemistry.chemical_elementCondensed Matter PhysicsThermal conductionMicrostructurePolaronElectronic Optical and Magnetic MaterialsPyroelectricitychemistryvisual_artElectric fieldvisual_art.visual_art_mediumLithiumCeramicFerroelectrics
researchProduct

Single-Crystal X-Ray Diffraction Study of Pressure and Temperature-Induced Spin Trapping in a Bistable Iron(II) Hofmann Framework.

2020

High-pressure single-crystal X-ray diffraction has been used to trap both the low-spin (LS) and high-spin (HS) states of the iron(II) Hofmann spin crossover framework, [FeII (pdm)(H2 O)[Ag(CN)2 ]2 ⋅H2 O, under identical experimental conditions, allowing the structural changes arising from the spin-transition to be deconvoluted from previously reported thermal effects.

DiffractionMaterials scienceBistabilitySpin trapping010405 organic chemistryGeneral MedicineGeneral Chemistry010402 general chemistry01 natural sciencesTemperature inducedMolecular physicsCatalysis0104 chemical sciencesSpin crossoverThermalX-ray crystallographyCondensed Matter::Strongly Correlated ElectronsSingle crystalAngewandte Chemie (International ed. in English)
researchProduct

Epitaxial growth and thermoelectric properties of TiNiSn and Zr0.5Hf0.5NiSn thin films

2011

Abstract Due to their exceptional thermoelectric properties Half-Heusler alloys like MNiSn (M = Ti,Zr,Hf) have moved into focus. The growth of single crystalline thin film TiNiSn and Zr 0.5 Hf 0.5 NiSn by dc magnetron sputtering is reported. Seebeck and resistivity measurements were performed and their dependence on epitaxial quality is shown. Seebeck coefficient, specific resistivity and power factor for Zr 0.5 Hf 0.5 NiSn at room temperature were measured to be 63 μV K − 1 , 14.1 μΩ m and 0.28 mW K − 2  m − 1 , respectively. Multilayers of TiNiSn and Zr 0.5 Hf 0.5 NiSn are promising candidates to increase the thermoelectric figure-of-merit by decreasing thermal conductivity perpendicular …

DiffractionMaterials scienceCondensed matter physicsMetals and AlloysSurfaces and InterfacesSputter depositionEpitaxySurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsThermal conductivityElectrical resistivity and conductivitySeebeck coefficientThermoelectric effectMaterials ChemistryThin filmThin Solid Films
researchProduct

Facile fabrication of flower like self-assembled mesoporous hierarchical microarchitectures of In(OH)3 and In2O3: In(OH)3 micro flowers with electron…

2016

Abstract A template and capping-reagent free facile fabrication method for mesoporous hierarchical microarchitectures of flower-like In(OH) 3 particles under benign hydrothermal conditions is reported. Calcination of In(OH) 3 to In 2 O 3 with the retention of morphology is also described. Both In(OH) 3 and In 2 O 3 microstructures were analyzed with SEM, EDX, TEM and powder X-ray diffraction. The crystal sizes for In(OH) 3 and In 2 O 3 were calculated using the Scherrer equation. In In(OH) 3 the thin flakes at the periphery of micro flowers were electron beam sensitive. The mechanism of self-assembly process was analyzed as well.

DiffractionMaterials scienceFabricationmicrostructureNanotechnologysemiconductors02 engineering and technology010402 general chemistry01 natural sciencesHydrothermal circulationlaw.inventionCrystallawpuolijohteetGeneral Materials ScienceCalcinationta116Scherrer equationmicroporous materials021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure0104 chemical sciencesChemical engineeringoxidesoksidit0210 nano-technologyMesoporous material
researchProduct

Influence of the pH on the ZnO nanoparticle growth in supercritical water: Experimental and simulation approaches

2014

Abstract In order to improve the knowledge on the nucleation and the growth mechanisms of metal oxides nanoparticles produced in supercritical water domain, ZnO was used as a “model” material. A continuous process of hydrothermal synthesis was employed to synthesize ZnO nanopowders ( T  = 410 °C and P  = 305 bar) from Zn(NO 3 ) 2 and KOH solutions with different values of [KOH]/[Zn(II)] ratio from 0 to 8 in order to investigate the pH effect on the growth of ZnO nanocrystallite in terms of size and morphology. The samples were characterized by X-Ray Diffraction and Transmission Electronic Microscopy. ZnO crystal was considered as a cylindrical crystallite with a diameter D and height H . Es…

DiffractionMaterials scienceGeneral Chemical EngineeringNucleationNanoparticleNanotechnologyCondensed Matter PhysicsSupercritical fluidCrystalMetalChemical engineeringvisual_artvisual_art.visual_art_mediumHydrothermal synthesisCrystallitePhysical and Theoretical ChemistryThe Journal of Supercritical Fluids
researchProduct

GdBO3 and YBO3 crystals under compression

2021

High-pressure X-ray diffraction studies on nanocrystals of the GdBO3 and YBO3 rare-earth orthoborates are herein reported up to 17.4(2) and 13.4(2) GPa respectively. The subsequent determination of the room-temperature pressure-volume equations of state is presented and discussed in the context of contemporary publications which contradict the findings of this work. In particular, the isothermal bulk moduli of GdBO3 and YBO3 are found to be 170(13) and 163(13) GPa respectively, almost 50% smaller than recent findings. Our experimental results provide an accurate revision of the high-pressure compressibility behaviour of GdBO3 and YBO3 which is consistent with the known systematics in isomor…

DiffractionMaterials scienceHigh-pressureThermodynamicsContext (language use)02 engineering and technologyInelastic light scattering010402 general chemistry01 natural sciencesIsothermal processModuliAb initio quantum chemistry methodsMaterials ChemistryBulk modulusBulk modulusSynchrotron radiationMechanical EngineeringMetals and Alloys021001 nanoscience & nanotechnologyX-ray diffractionPhosphors0104 chemical sciencesMechanics of MaterialsFISICA APLICADAX-ray crystallographyCompressibility0210 nano-technologyJournal of Alloys and Compounds
researchProduct

Facile Large Scale Synthesis of WS2 Nanotubes from WO3 Nanorods Prepared by a Hydrothermal Route.

2005

Abstract Hexagonal WO 3 nanorods of 5–50 nm in diameter and 150–250 nm in length have been synthesised in gram quantities by a low temperature hydrothermal route using citric acid as a structural modifier and hexadecylamine as a templating agent. The ratio of [A]/[W] play an important role on WO 3 nanorods formation. These WO 3 nanorods were found highly suitable as a precursor for the synthesis of a good yield of multiwalled WS 2 nanotubes by reducing them with H 2 S at 840 °C for 30 min. The length and the wall thickness of the WS 2 nanotubes could be altered by controlled reduction of the oxide precursor. The morphology, structure and the composition of the WO 3 nanorods and WS 2 nanotub…

DiffractionMaterials scienceMorphology (linguistics)ChemistryOxideNanotechnologyGeneral ChemistryGeneral MedicineCondensed Matter PhysicsMicrostructureHydrothermal circulationchemistry.chemical_compoundChemical engineeringTransmission electron microscopyYield (chemistry)General Materials ScienceNanorodSelected area diffractionHigh-resolution transmission electron microscopyChemInform
researchProduct

Electrical Characterization of the Fe-Doped BT Ceramics by an Impedance Spectroscopy

2015

The electric properties of the Fe - doped BaTiO3 ceramics was investigated as a function of frequency and temperature. The structure and morphology of investigated sample were characterized by an X-ray diffraction and scanning electron microscopy. The impedance measurements were carried out at the temperature ranging from 450 K to 600 K, and at the frequency range from 0.1 Hz to 10 MHz. Based on these parameters the electrical properties of the grains and grains boundaries were described. The bulk and grains boundaries resistance of ceramics and the thermal activation energies were determined.

DiffractionMaterials scienceMorphology (linguistics)Scanning electron microscopeCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsDielectric spectroscopyCharacterization (materials science)visual_artThermalvisual_art.visual_art_mediumCeramicComposite materialElectrical impedanceFerroelectrics
researchProduct