Search results for "Tipa"
showing 10 items of 596 documents
Multipactor Analysis in Coaxial Waveguides for Satellite Applications using Frequency-Domain Methods
2006
This work presents the analysis, manufacturing and testing of a coaxial sample in order to investigate the multipactor effect in this kind of waveguide structures. Several in-home and commercial software have been used to design a quarter-wave transformer coaxial circuit centered at 1.35 GHz. The multipactor analysis of this device has been carried out allowing the prediction of the RF breakdown multipactor threshold. Moreover, the multipactor onset of such a prototype has been measured showing a very good agreement with our simulations. In addition to this, comparison has been also done with results from the technical literature fully validating the new algorithm developed.
Analysis of Multipactor Effect in a Partially Dielectric-Loaded Rectangular Waveguide
2019
This paper 1 presents a study of the multipactor 2 effect in a partially dielectric-loaded rectangular waveguide. 3 To obtain the simulations presented in this paper, a detailed 4 analysis of the dynamics of the electron inside this waveguide 5 has been performed, taking into account the radio frequency 6 electromagnetic fields propagating in the waveguide and the dc 7 electric field that appears because of the charging of the dielectric 8 layer. This electrostatic field is obtained by computing the electric 9 potential produced by an arbitrary charge distribution on the 10 dielectric layer in a dielectric-loaded waveguide. The electron 11 trajectory is then found by numerically solving the…
Multipactor RF Breakdown in Coaxial Transmission Lines With Digitally Modulated Signals
2016
The aim of this paper is the study of the RF multipactor breakdown in coaxial transmission lines excited by a single carrier with a digitally modulated signal. Employing an in-house developed code, numerical simulations are performed to determine the RF multipactor voltage threshold for several digitally modulated signals under different modulations schemes: quadrature phase-shift keying, 16-quadrature amplitude modulation, 16-amplitude and phase-shift keying, and 32-amplitude and phase-shift keying. Moreover, a coarse method based on the envelope integration to determine the RF multipactor voltage threshold when involving arbitrary digital modulations is also presented. These results are a…
High power analysis and design of dual-mode channel filters
2009
In this paper, we present two dual-mode channel filter topologies which are able to withstand more than 600 W in Ku-Band. The two different designs (one with elliptical cavities and the other one with rectangular cavities) implement the same transfer function: four order, elliptical response centered in 12 GHz, with 40 MHz bandwidth and two transmission zeros. It is shown that the critical dimensions for the power-handling of these filters are the dimensions of the input-output irises. In fact, in order to rigorously obtain these conclusions and to reach these high-power levels (including margins), it is essential to use the advanced numerical techniques described in the paper to predict th…
Multipactor Effect in a Parallel-Plate Waveguide Partially Filled With Magnetized Ferrite
2014
The aim of this paper is the analysis of the multipactor effect in a parallel-plate waveguide when a ferrite slab, transversally magnetized by a static magnetic field parallel to the waveguide walls, is present. Employing an in-house developed code, numerical simulations are performed to predict the multipactor radio frequency voltage threshold in such a ferrite-loaded waveguide. Variations of the ferrite magnetization field strength and the ferrite slab height are analyzed. Effective electron trajectories are also shown for a better understanding of the breakdown phenomenon, finding different multipactor regimes.
Multipactor Effect Characterization of Dielectric Materials for Space Applications
2018
[EN] The objective of this paper is to advance the state of the art in the characterization of the multipactor effect in dielectric materials. The materials studied are the most commonly used dielectrics in space applications, namely, Alumina, Rexolite, Rogers RT5870, Rohacell, Teflon, and Ultem 1000. In this paper, a new family of coaxial waveguide components, covering the L- and S-bands, with a wideband, low-pass response has been designed, and six different prototypes have been specifically optimized and manufactured. The six prototypes have then been used to simulate and measure the multipactor breakdown susceptibility charts for the six dielectric materials investigated. Finally, the s…
Multipactor Mitigation in Coaxial Lines by Means of Permanent Magnets
2014
The main aim of this paper is the analysis of the feasibility of employing permanent magnets for the multipactor mitigation in a coaxial waveguide. First, the study of a coaxial line immersed in a uniform axial magnetic field shows that multipactor can be suppressed at any RF if the external magnetic field is strong enough. Both theoretical simulations and experimental tests validate this statement. Next, multipactor breakdown of a coaxial line immersed in a hollow cylindrical permanent magnet is analyzed. Numerical simulations show that multipactor can be suppressed in a certain RF range. The performed experimental test campaign demonstrates the capability of the magnet to avoid the multip…
Analysis of the multipactor effect by means of the 3D BI-RME method
2017
Multipactor effect is a well-known phenomenon of RF breakdown in satellite pay-loads which degrades components, generates undesirable harmonics, contributes to power dissipation and increases noise in communications. Traditionally, multipactor has been investigated with the aim of obtaining the so-called multipactor threshold voltage, or to present different multipaction detection methods. Little effort has been devoted, in contrast, to study the problem from a full-wave point of view, thus allowing for the analysis of more complex structures. The main goal of this work is to analyze the interaction between a multipactor current and a realistic microwave cavity by means of a rigorous and ac…
Enhanced prediction of multipaction breakdown in passive waveguide components including space charge effects
2008
An enhanced prediction software tool of multipaction breakdown effect in passive waveguide components is proposed in this work. For such purpose, the space charge field effects are included employing a particle-in-cell code and finite differences in time domain integration techniques. As a result, the novel prediction tool models all the physical effects derived from multipactor such as reflected power, noise and/or harmonics, thus improving the accuracy of the threshold predictions and providing very valuable additional information of the phenomena. Such tool has been integrated within a full-wave modal analysis software for complex waveguide geometries (FEST3D), and the multipactor effect…
Multipactor Discharges in Parallel-Plate Dielectric-Loaded Waveguides Including Space-Charge Effects
2008
[EN] The objective of this paper is to study the time evolution of multipactor discharges in a parallel-plate dielectric-loaded waveguide. The electron discharge phenomena investigated in this paper include the effects of space charge, as well as the presence of time varying static fields. In order to perform the simulations presented in this paper, an approach considering simultaneously multiple effective electrons has been used. The results obtained demonstrate that multipactor discharges do turn off by themselves under certain circumstances when they occur in such dielectric-loaded structures.