Search results for "Titan"
showing 10 items of 1109 documents
In vitro assessment of a novel additive manufactured titanium implant abutment
2021
Background Dental implant temporization remains a clinical challenge. A novel abutment simplifying the procedure was developed, but conventional fabrication was costly and unpredictable. A workflow was developed to fabricate the novel abutment using additive manufacturing. This in vitro investigation assessed the additive manufactured (AM) novel abutments to conventionally manufactured (CM) abutments. Material and methods The AM abutments were fabricated in dental-grade titanium (Ti-6Al-4V) using Selective Laser Melting and were post-processed. The CM abutments were milled and subsequently laser welded manually. Pin strength of the abutments was assessed using a universal loading machine. T…
The 2-μm spectroscopy of Huygens probe landing site on Titan with Very Large Telescope/Nasmyth Adaptive Optics System Near-Infrared Imager and Spectr…
2007
[1] Several ground-based telescopes followed the event of the Huygens probe descent through Titan's atmosphere (14 January 2005). We used the Nasmyth Adaptive Optics System Near-Infrared Imager and Spectrograph (NACO) adaptive optics system at the UT-4 of the Very Large Telescope in Chile to perform both spectroscopic and imaging measurements of Titan. We present here a selected sample of the spectra we acquired on 16 January 2005 in the K band between 2.03 and 2.40 μm. Our spectra include the Huygens landing site and surrounding dark and bright areas. We apply a radiative transfer code using new methane absorption coefficients calculated in the 2-μm region. The analysis of the data yields …
An analysis of VLF electric field spectra measured in Titan's atmosphere by the Huygens probe
2009
[1] A numerical simulation of Titan's electromagnetic cavity in the VLF band is carried out using the Transmission Line Matrix (TLM) method, with the aim of assessing the VLF electric field spectra sent by the Huygens probe. In an Earth-like model, successive peaks would be expected in the spectra, associated with multiple reflections of the electromagnetic wave on the external surfaces of Titan's electromagnetic cavity, formed by the ionosphere and a conductive ground or underground surface. However, owing to high losses conferred by the electrical conductivity to Titan's atmosphere, the direct numerical and experimental spectra are decreasing functions of the frequency without resonances …
Iron deposition on TiO2(110): effect of the surface stoichiometry and roughness
1999
Abstract Characterizations of ultra-thin iron films deposited on TiO 2 (110) surfaces with different stoichiometries, roughnesses and crystallinities have been carried out by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). For a high initial roughness of the substrate, a 2D growth mode is observed up to three monolayers. But, if the initial roughness is low, clusters grow on the TiO 2 surface. Whatever the initial surface stoichiometry, electronic exchanges occur between titanium and iron leading to a reduction of titanium and an oxidation of iron. This interaction between iron and titanium dioxide surface takes place only at the interface between the metal and…
Fabrication of layered nanostructures by successive electron beam induced deposition with two precursors: protective capping of metallic iron structu…
2011
We report on the stepwise generation of layered nanostructures via electron beam induced deposition (EBID) using organometallic precursor molecules in ultra-high vacuum (UHV). In a first step a metallic iron line structure was produced using iron pentacarbonyl; in a second step this nanostructure was then locally capped with a 2-3 nm thin titanium oxide-containing film fabricated from titanium tetraisopropoxide. The chemical composition of the deposited layers was analyzed by spatially resolved Auger electron spectroscopy. With spatially resolved x-ray absorption spectroscopy at the Fe L₃ edge, it was demonstrated that the thin capping layer prevents the iron structure from oxidation upon e…
Multi-doped Brookite-Prevalent TiO2 Photocatalyst with Enhanced Activity in the Visible Light
2018
© 2018 Springer Science+Business Media, LLC, part of Springer Nature Abstract: Enabling solar and/or visible light-driven photocatalysis is a crucial step to access innovative applications in environmental science and sustainable energy. Titanium dioxide is the most used photocatalyst because of its low cost and toxicity, however it is also limitedly active under visible light irradiation due to its wide band gap. Among its polymorphs, brookite holds promising optoelectronic properties for visible light photocatalysis, which have to the best of our knowledge been limitedly exploited. Here, a C,S,N-doped brookite-based TiO2has been prepared via a rapid one-pot sol–gel synthesis. Besides subs…
Electron Transfer from Organic Aminophenyl Acid Sensitizers to Titanium Dioxide Nanoparticle Films
2009
Electron transfer from three conjugated amino-phenyl acid dyes to titanium and aluminum oxide nanocrystalline films was studied by using transient absorption spectroscopy with sub 20 fs time-resolution over the visible spectral region. All the dyes attached to TiO2 showed long-lived ground state bleach signals indicative of formation of new species. Global analysis of the transient kinetics of the dyes on TiO2 revealed stimulated emission decays of about 40 fs and less than 300 fs assigned to electron injection. The same dyes on Al2O3 substrates displayed long stimulated emission decays (ns) suggesting that electron transfer is blocked in this high band gap semiconductor. For two of the dye…
Photocatalytic oxidation mechanism of benzonitrile in aqueous suspensions of titanium dioxide
2007
Abstract The photocatalytic oxidation of benzonitrile was carried out in aqueous suspensions (pH 11) of commercial polycrystalline TiO 2 (Merck and Degussa P25) irradiated by ultraviolet light. The rate of decomposition was dependent on the concentration of benzonitrile and followed a pseudo-first order kinetics. The complete mineralization of a 0.70 mM benzonitrile solution was achieved in ca. 8 h by using TiO 2 Degussa P25, whereas the substrate was only partially mineralized even after 14 h of irradiation in the presence of TiO 2 Merck. The final oxidation products were carbonate and nitrate. The appearance and the evolution of organic and inorganic intermediate species were also investi…
The excellent biocompatibility and negligible immune response of the titanium heterometallic MOF MUV-10
2021
The Ti-Ca heterometallic MOF MUV-10 exhibits good dispersibility in phosphate buffer and low phosphate-induced degradation in comparison to other MOF systems. It induces no cytotoxicity towards cells of the immune system and no inmune response, making it an attractive candidate for biomedical applications and demonstrating its safe use for other applications.
Titanium Lattice Structures Produced via Additive Manufacturing for a Bone Scaffold: A Review
2023
The progress in additive manufacturing has remarkably increased the application of lattice materials in the biomedical field for the fabrication of scaffolds used as bone substitutes. Ti6Al4V alloy is widely adopted for bone implant application as it combines both biological and mechanical properties. Recent breakthroughs in biomaterials and tissue engineering have allowed the regeneration of massive bone defects, which require external intervention to be bridged. However, the repair of such critical bone defects remains a challenge. The present review collected the most significant findings in the literature of the last ten years on Ti6Al4V porous scaffolds to provide a comprehensive summa…