Search results for "Titani"
showing 10 items of 931 documents
The excellent biocompatibility and negligible immune response of the titanium heterometallic MOF MUV-10
2021
The Ti-Ca heterometallic MOF MUV-10 exhibits good dispersibility in phosphate buffer and low phosphate-induced degradation in comparison to other MOF systems. It induces no cytotoxicity towards cells of the immune system and no inmune response, making it an attractive candidate for biomedical applications and demonstrating its safe use for other applications.
Titanium Lattice Structures Produced via Additive Manufacturing for a Bone Scaffold: A Review
2023
The progress in additive manufacturing has remarkably increased the application of lattice materials in the biomedical field for the fabrication of scaffolds used as bone substitutes. Ti6Al4V alloy is widely adopted for bone implant application as it combines both biological and mechanical properties. Recent breakthroughs in biomaterials and tissue engineering have allowed the regeneration of massive bone defects, which require external intervention to be bridged. However, the repair of such critical bone defects remains a challenge. The present review collected the most significant findings in the literature of the last ten years on Ti6Al4V porous scaffolds to provide a comprehensive summa…
Efficient removal of bisphenol A from wastewaters: Catalytic wet air oxidation with Pt catalysts supported on Ce and Ce–Ti mixed oxides
2019
Catalytic wet air oxidation (CWAO) of an aqueous solution of bisphenol A (BPA) was investigated at 160 ℃ and 2.0 MPa of air in a batch reactor. Activity of supported platinum catalysts (2.5 wt%), prepared by wet impregnation, was compared with pure cerium and cerium–titanium oxide catalysts. Supported platinum catalysts showed higher activities in the removal of BPA than pure CeO2, Ce0.8Ti0.2O2 and Ce0.2Ti0.8O2. The oxidation reaction was followed the pseudo-first order rate law and the highest BPA removal, 97% and 95%, was achieved with Pt/CeO2 and Pt/Ce0.8Ti0.2O2 catalysts respectively. The CWAO of BPA aqueous solution was not a surface area specific reaction but the more important factor…
The effect of silver nanoparticles, zinc oxide nanoparticles, and titanium dioxide nanoparticles on the push-out bond strength of fiber posts
2019
Background This study was undertaken to investigate the effect of intraradicular dentin pretreatment with silver nanoparticles (SNPs), zinc oxide nanoparticles (ZNPs), and titanium oxide nanoparticles (TNPs) on the push-out bond strength (PBS) of fiber posts to root dentin using two types of resin cements. Material and methods Eighty single-rooted human premolar roots were randomly divided into eight groups after endodontic treatment and post space preparation, according to the type of intraradicular dentin pretreatment with different nanoparticle solutions (n=20). The groups included no pretreatment (control) and pretreatments with SNPs, ZNPs, and TNPs. Each group was divided into 2 subgro…
Production of bone mineral material and BMP-2 in osteoblasts cultured on double acid-etched titanium
2017
Background: The study of osteoblasts and their osteogenic functions is essential in order to understand them and their applications in implantology. In this sense, this study try to study BMP-2 production and bone matrix deposition, in addition to other biological variables, in osteoblasts cultured on a rough double acid-etched titanium surface (Osseotite®, Biomet 3i, Palm Beach Garden, Florida, USA) in comparison to a smooth titanium surface (machined) and a control Petri dish. Material and Methods: An in vitro prospective study. NHOst human osteoblasts from the femur were cultured on three different surfaces: Control group: 25-mm methacrylate dish (n = 6); Machined group: titanium discs w…
Effect on osseointegration of two implant macro-designs:A histomorphometric analysis of bicortically installed implants in different topographic site…
2018
Background To evaluate the effect of two different implant macro-designs on the sequential osseointegration at bicortically installed implants in the rabbit tibia. A further aim is to compare the osseointegration at different topographic zones. Material and Methods 27 New Zealand rabbits were implemented. Two implants, one for each macro-design (Ticare Inhex® or Ticare Quattro®, Mozo-Grau, Valladolid, Spain), were randomly implanted in the diaphysis or metaphysis of each tibia. The flaps were sutured to allow a submerged healing. The animals were sacrificed after 2, 4 or 8 weeks. Ground sections were prepared and analyzed. Results No statistically significant differences were found between …
Effects of locally applied Insulin-like Growth Factor-I on osseointegration.
2019
Background The aim of this study was to assess the effect of local application of IGF-I on osseointegration of dental implants placed in osteoporotic bones. Material and Methods 16 rabbits were randomly distributed into two groups: eight animals were ovariectomized and fed a low-calcium diet for six weeks, in order to induce experimental osteoporosis, and the others were sham-operated and fed a standard diet. A titanium implant was inserted into the tibiae in both groups. In half of the rabbits, 4 μg of IGF-I was applied into the ostectomy, prior to the implant insertion. A total of 32 implants were placed. Animals were sacrificed two weeks after surgery and decalcified samples were process…
Osseoconductivity of a Specific Streptavidin-Biotin-Fibronectin Surface Coating of Biotinylated Titanium Implants - A Rabbit Animal Study
2015
Background Biofunctionalized implant surfaces may accelerate bony integration and increase long-term stability. Purpose The aim of the study was to evaluate the osseous reaction toward biomimetic titanium implants surfaces coated with quasicovalent immobilized fibronectin in an in vivo animal model. Materials and Methods A total of 84 implants (uncoated [control 1, n = 36], streptavidin–biotin coated [test 1, n = 24], streptavidin–biotin–fibronectin coated [test 2, n = 24]) were inserted 1 mm supracortically in the proximal tibia of 12 rabbits. The samples were examined after 3 and 6 weeks. Total bone-implant contact (tBIC; %), bone-implant contact in the cortical (cBIC; %) and in the spong…
Production of dibutyl carbonate by insertion of CO2 in titanium(IV) tetrabutoxide
2015
The species resulting from insertion of 12CO2 and 13CO2 into titanium(IV) butoxide is for the first time fully characterized by means of infrared and nuclear magnetic resonance spectroscopy. Results show formation of Ti-monobutylcarbonate, that easily undergoes nucleophilic attack by an aliphatic amine. The hydrolysis of the resulting species produces butylcarbamate and dibutylcarbonate as the only main products. Characterization results of the carbonate-like adduct, along with its reactivity with amine molecules open the route to new ways of CO2 utilization as building block for valuable organic compounds.
Photoreduction of carbon dioxide to formic acid in aqueous suspension: a comparison between phthalocyanine/TiO2 and porphyrin/TiO2 catalysed processes
2014
Composite materials prepared by loading polycrystalline TiO2 powders with lipophilic highly branched Cu(II)- and metal-free phthalocyanines or porphyrins, which have been used in the past as photocatalysts for photodegradative processes, have been successfully tested for the efficient photoreduction of carbon dioxide in aqueous suspension affording significant amounts of formic acid. The results indicated that the presence of the sensitizers is beneficial for the photoactivity, confirming the important role of Cu(II) co-ordinated in the middle of the macrocycles. A comparison between Cu(II) phthalocyanines and Cu(II) porphyrins indicated that the Cu(II)- phthalocyanine sensitizer was more e…