Search results for "Toe"
showing 10 items of 3824 documents
A study of thin surface layers by multilayer Mössbauer spectroscopy /MMS/
1990
A stacking Mossbauer technique, MMS has been applied for studying thin surface layers. The surface layers formed on the57Fe film in aqueous solutions of corrosion inhibitors, such as zinc phosphate and barium metaborate, and in distilled water was studied by this method. It has been found that the corrosion is much slower in the presence of zinc phosphate and barium metaborate. XPS analysis suggests the formation of a mixed iron zinc phosphate on the surface of the57Fe film after corrosion in a zinc phosphate solution.
Quantitative XPS analysis of leached layers on optical glasses
1993
The corrosion of optical glasses often reduces the utility of uncoated glasses as well as the adhesion of resistive coatings deposited onto corroded glasses. Photoelectron spectroscopy (XPS) was applied to study glass surfaces with respect to their surface corrosion. In particular, leaching by the influence of polish slurries, pure water, air and even residual gases inside a vacuum device was studied in detail. Pure quartz glass and different sodium and barium silicate glasses were broken in ultrahigh vacuum (4 × 10−10 mbar) for the determination of sensitivity factors of the different XPS signals. It was found that a quantitative determination of the surface composition of corroded and lea…
Chemical heterogeneities in nanometric titanomagnetites prepared by soft chemistry and studied ex situ : evidence for fe-segregation and oxidation ki…
2001
Nanocrystalline Fe-based spinels with composition Fe3-xTixO4 are synthesized using soft chemistry. Two steps are involved: precipitation in an aqueous solution followed by thermal annealing under a reducing mixture of N2/H2/H2O gases. Fe-segregation is found inside stoichiometric particles when the powders are studied ex situ; they exhibit a strong surface iron enrichment. This heterogeneity is related to kinetic effects linked to the difference of mobility between Fe2+ and Ti4+ cations during the partial oxidation of cations occurring ex situ. Stresses in the grains induced by oxidation govern the oxidation kinetics and lead to an abrupt compositional variation inside each particle. These…
ZnO nanorods covered with a TiO2 layer: simple sol–gel preparation, and optical, photocatalytic and photoelectrochemical properties
2015
In this work, composite core–shell ZnO/TiO2 materials were fabricated by deposition of TiO2 layers via a sol–gel method onto ZnO nanorods hydrothermally grown on an ITO electrode. Two approaches to the sol–gel procedure resulted in strongly different morphologies and thicknesses of the deposited TiO2 layer, as shown in electron microscopy studies. The decrease of the optical band gap energies of the ZnO/TiO2 composites by about 0.2–0.3 eV with respect to the TiO2 nanoparticles and ZnO nanorods was determined from UV-Vis diffuse reflectance spectra. The photocatalytic activities of the systems were determined by investigation of the decolorization of Methylene Blue (MB) in aqueous solution, …
In-situ characterisation of organosilane films formation on aluminium alloys by electrochemical quartz crystal microbalance and in-situ ellipsometry
2005
Abstract Organosilane pre-treatments have been studied intensively during the last years in order to replace hexavalent chromium conversion treatments. The aim of this study is to follow in-situ the formation of this organosilane layer in solution. Two in-situ techniques, spectroscopic ellipsometry and electrochemical quartz crystal microbalance, were used to investigate the mechanism and the kinetics of this protective film formation. In-situ measurements highlight that the organosilane film observed after the drying process is not formed into the solution, but during the emersion and drying step. Hence, it has been possible to characterise the presence of a very thin organosilane layer in…
Some working principles of heterogeneous photocatalysis by semiconductors
1993
The present paper outlines some of the principles which are the working base for the photocatalytic processes: we refer to those photocatalytic processes performed using irradiated semiconductors. The steps related to the photoproduction of electron-hole pairs and their separation are discussed. It is also shown how the step of pair separation induces the formation of various chemical species, some of which are useful for the oxidation reactions. It is also shown that in order to reach a detailed description of photocatalytic processes it is necessary to have the knowledge of both the electronic and the physicochemical features of the semiconductors. The paper finally reports a case study r…
ON THE EFFECTS OF A CRACK PROPAGATING TOWARD THE INTERFACE OF A BIMATERIAL SYSTEM
2006
This paper deals with the influence of matrix cracks on the failure mode of bimaterial systems and composite materials. In order to investigate such an influence, the stress field near a crack embedded into the more yielding material and propagating perpendicularly to the interface, has been analyzed by using systematic numerical simulations. Such analysis has shown that the crack propagation give rises to transversal stresses that can damage the reinforcing materials when this has low modulus, as glass fibers, or low transversal strength, such as carbon fibers. Moreover, the longitudinal stress concentration can damage the reinforcing material only if this has high stiffness, as in the cas…
Influence of annealing atmosphere on photoelectrochemical response of TiO2 nanotubes anodized under controlled hydrodynamic conditions
2021
[EN] The influence of three annealing atmospheres (air, nitrogen and argon) and the use of controlled hydrodynamic conditions (from 0 to 5000 rpm) on morphological, structural, chemical and photoelectrochemical properties of TiO2 nanotubes have been evaluated. For this purpose, different characterization techniques have been used: Field Emission Scanning Electron Microscopy, Raman Confocal Laser Spectroscopy, X-Ray Diffraction, X-Ray Photoelectron Spectroscopy, Incident Photon-to-electron Conversion Efficiency measurements, ultraviolet-visible absorption spectra, Mott-Schottky analysis and photoelectrochemical water splitting tests. According to the results, it can be concluded that both hy…
<title>Electrochromism in oxyfluoride thin films</title>
1994
Oxyfluoride films based on W and Ti were prepared by reactive sputtering in plasmas containing O2 + CF4. The deposition rate was large, particularly when chemical sputtering was promoted by heating the target. The films could show large charge insertion/extraction, high coloration efficiency, and good cycling durability.© (1994) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
Superficial defects induced by argon and oxygen bombardments on (110) TiO2 surfaces
1998
Abstract Compositional and chemical changes of titanium dioxide monocrystalline surfaces induced by bombardment with 4 keV argon and oxygen ions have been studied by AES, XPS and AFM. Argon ion bombardment induced strong changes in the composition and chemical state of the surface: loss of oxygen due to preferential sputtering occurred, and, related to this, Ti4+ species were reduced to Ti3+ and Ti2+. During oxygen bombardment, competition between preferential sputtering of oxygen ions of the oxide surface and oxygen implantation was observed. This phenomenon was found to be strongly dependent upon the incidence angle of the oxygen ions. Moreover, an oxygen bombardment with normal incidence…