Search results for "Toluene"
showing 10 items of 429 documents
A convenient chemo-enzymatic synthesis and 18F-labelling of both enantiomers of trans-1-toluenesulfonyloxymethyl-2-fluoromethyl-cyclopropane
2008
The present report is concerned with a stereoselective, reliable route to trans-1,2-disubstituted cyclopropanes and in particular to (S,S)-1-tosyloxymethyl-2-fluoromethyl-cyclopropane (1) and (R,R)-1-tosyloxymethyl-2-fluoromethyl-cyclopropane (ent-1) as conformationally restricted, terminally fluorinated C4-building blocks for medicinal chemistry. The enzymatic kinetic resolution based synthesis of 1 and ent-1 utilises inexpensive, commercially available starting materials. It is based on enantiomeric resolution of rac-cyclopropane carboxylic esters using esterase from Streptomyces diastatochromogenes. Both enantiomers of 1 were prepared selectively in high overall yield over nine steps, st…
Comparative evaluation of liquid chromatography versus gas chromatography using a β-cyclodextrin stationary phase for the determination of BTEX in oc…
2009
An HPLC method for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene in occupational environments was developed and compared with a GC-MS method. Chromatographic analysis using a beta-cyclodextrin stationary phase was performed after active and passive air sampling by adsorption on activated charcoal and pressurized fluid extraction. The analytes were completely separated and quantified using both methods, although GC-MS provided better resolutions and lower detection limits than HPLC. The HPLC method was unsuccessfully applied to the determination of benzene in real samples because its sensitivity was too low. Both methods were applied to the analysis …
Determination of Paint Solvents by Vapour Phase Fourier Transform Infrared Spectrometry.
1997
Abstract A fast procedure has been developed for the direct determination of paint solvents. The method is based on the injection of small volumes of untreated solvent mixtures into a heated Pyrex glass reactor in which the sample is volatilized and introduced by means of a flow of nitrogen into an IR multiple pass gas cell and the spectrum in the mid-IR region is registered as a function of time. Data found for samples are interpolated in calibration graphs obtained by injecting different volumes of pure compounds which constitute the solvent mixture. A methylisobutylketone (MIBK) toluene mixture was used as test system to develop the proposed procedure. The method provides a limit of dete…
Determination of N-nitrosodiethanolamine in cosmetic products by reversed-phase dispersive liquid-liquid microextraction followed by liquid chromatog…
2016
A new analytical method for the determination of N-nitrosodiethanolamine (NDELA), a very harmful compound not allowed in cosmetic products, is presented. The method is based on a new approach of dispersive liquid-liquid microextraction (DLLME) useful for extraction of highly polar compounds, called reversed-phase DLLME (RP-DLLME), followed by liquid chromatography-ultraviolet/visible (LC-UV/Vis) determination. The variables involved in the RP-DLLME process were studied to provide the best enrichment factors. Under the optimized conditions, a mixture of 750µL of acetone (disperser solvent) and 125µL of water (extraction solvent) was rapidly injected into 5mL of toluene sample solution. The e…
Extractive-Pyrolytic Method for Au/MeO<sub>x</sub> Nanocomposites Production
2014
Au/MeOx(MeOx- SiO2, Al2O3and TiO2) nanocomposites have been produced by the extractive-pyrolytic method. An organic extract – a solution of n-trioctylammonium tetrachlorolaurate ([Oct3NH]AuCl4) in toluene – was used as a gold-containing precursor. The produced samples were analyzed by IR spectroscopy, X-ray diffraction and scanning electron microscopy. The performed studies have shown that the mean size of the metal crystallites vary within wide limits: on Al2O3from 60 nm to 35 nm; on SiO2from 33 nm to 23 nm; on TiO2from 50 nm to 13 nm.
A remarkable rearrangement during reaction between triazolopyridinium ylides and dimethyl acetylenedicarboxylate
1991
Abstract The ylides from 2-acylmethyltriazolopyridinium salts ( 1 ) react with dimethyl acetylenedicarboxylate in toluene solution to give the 7-pyrroleninylpyrazolo[1,5-a]pyridines ( 5 ).
Targeting BCL-2 family proteins to overcome drug resistance in non-small cell lung cancer.
2007
Cytotoxic chemotherapies are standard of care for patients suffering from advanced non-small cell lung cancer (NSCLC). However, objective responses are only achieved in 20% of cases and long-term survival is rarely observed. Clinically applied anticancer drugs exert at least some of their activities by inducing apoptosis. A critical step in apoptotic signal transduction is the permeabilization of the mitochondrial outer membrane (MOM), which is regulated by the BCL-2 family of proteins. Hence, therapeutic targeting of BCL-2 proteins is a promising approach to increase the drug-sensitivity of cancers. To this end we have assessed the impact of conditional expression of the proapoptotic multi…
Deep oxidation of pollutants using gold deposited on a high surface area cobalt oxide prepared by a nanocasting route.
2011
Gold deposited on a cobalt oxide with high surface area (138 m2 g−1), obtained through a nanocasting route using a siliceous KIT-6 mesoporous material as a hard template, has demonstrated high activity for the total oxidation of propane and toluene, and ambient temperature CO oxidation. The addition of gold promotes the activity when compared to a gold-free Co3O4 catalyst prepared using the same nanocasting technique. The enhanced catalytic activity when gold is present has been explained for the deep oxidation of propane and toluene in terms of the improved reducibility of cobalt oxide when gold is added, rather than to the intrinsic activity of metallic gold particles. The improved behavi…
Long-term performance of peat biofilters treating ethyl acetate, toluene, and its mixture in air.
2006
Three laboratory-scale peat biofilters were operated at 90 s empty bed residence time (EBRT) for over a year. Biodegradation of ethyl acetate, toluene, or a 1:1 mixture were investigated. In first stage, inlet concentration was progressively increased from 0.4 to 4.5 g/m3. The maximum elimination capacity (EC) found for ethyl acetate was 190 gC/m3·h, and it was not affected by toluene. The maximum EC found for toluene as a sole contaminant was 150 gC/m3·h, but the presence of ethyl acetate decreased the toluene maximum EC to 80 gC/m3·h. From respirometry monitoring, values of 3.19 g CO2/gC and 3.06 g CO2/gC for pure ethyl acetate and pure toluene, respectively, were found, with overall yiel…
Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η4-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]
2001
Abstract The reactions of the half-sandwich molybdenum(III) complexes CpMo(η 4 -C 4 H 4 R 2 )(CH 3 ) 2 , where Cpη 5 -C 5 H 5 and RH or CH 3 , with equimolar amounts of B(C 6 F 5 ) 3 have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe 3 . The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η 4 -C 4 H 6 )(μ-Cl)(μ-CH 2 )(O)MoCp][CH 3 B(C 6 F 5 ) 3 ], indicate that the borane attack has occurred at the methyl position.