Search results for "Toughness"

A dual of 4-regular graph forG × C2n

2003

Abstract A graph is said h-decomposable if its edge-set is decomposable into edge-disjoint hamiltonian cycles. Jha [3] conjectured that if G is a non-bipartite h-decomposable graph on even number of vertices, then G × K2 is h-decomposable. We use the notion of dual graph defined in [4], we prove that if G = Q1,2 ⊕ C3,4 is a 4-regular non-bipartite h-decomposable graph and the dual graphs relative to Q1,2 and C3,4 are connected then G × K 2 and G × C 2n are h-decomposable (where C 2n is an even cycle).

ELECTROSPUN NANOFIBROUS MATS IN FIBRE REINFORCED EPOXY LAMINATES

The Transverse Crack Tension test revisited

2016

Several problems arise when measuring the mode II interlaminar fracture toughness using a Transverse Crack Tension specimen; in particular, the fracture toughness depends on the geometry of the specimen and cannot be considered a material parameter. A preliminary experimental campaign was conducted on TCTs of different sizes but no fracture toughness was measured because the TCTs failed in an unacceptable way, invalidating the tests. A comprehensive numerical and experimental investigation is conducted to identify the main causes of this behaviour and a modification of the geometry of the specimen is proposed. It is believed that the obtained results represent a significant contribution in …

An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates

2007

Abstract The onset and propagation of interlaminar defects is one of the main damage mechanisms in composite materials. This is even more the case when considering layered materials comprising metallic laminae (typically Aluminium) and FRP laminae. Propagation of delamination mainly depends on the initial crack extension and its loading mode. This work presents some results of a combined analytical–numerical–experimental study on the onset and propagation mechanisms regarding interlaminar defects. Two cases have been analysed in particular, the first consisting of a glass-fibre reinforced epoxy resin laminate, and the second consisting of a hybrid laminate where a lamina of aluminium is lay…

Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction

2004

A critical review has been performed of the published experimental research concerning delamination onset and growth in composite laminate interfaces of different lay-ups under single-mode loadings. It was found that, depending on the loading mode and interface lay-up, the traditional fracture toughness characterization by unidirectionally reinforced composite tests can lead to marked under- or overestimation of material resistance to crack growth. Empirical models of fracture toughness as a function of delamination front orientation with respect to reinforcement directions of the adjacent laminae have been validated and their applicability range established.

Mechanical properties of basalt fiber reinforced composites manufactured with different vacuum assisted impregnation techniques

2016

Abstract This work describes an experimental mechanical characterisation campaign on composites made out of a quasi-unidirectional basalt fabric. In order to evaluate the ability of commercial basalt fabrics and their composites to meet the potentials of basalt fibers, the work has used raw materials from commercial catalogs with no further modification. Two common manufacturing techniques for medium performance composites have been adopted: vacuum assisted resin infusion, and hand-impregnated vacuum bagging. Two panels, one for each technique, have been fabricated, able to provide a sufficient number of samples for a comprehensive stiffness and strength characterization through Tensile, Fl…

Mechanism of brittle fracture in a ductile 316 alloy during stress corrosion

1990

Abstract The ductile f.c.c. 316 alloy is shown to exhibit brittle transgranular (and intergranular) stress corrosion cracking in a 153°C MgCl2 solution at free corrosion potential. Tests on smooth and pre-cracked specimens are performed to identify the mechanisms of fracture. Transgranular cracking is related to both a discontinuous microcleavage mainly on {100} planes and a microshearing on {111} planes. A new physical modelization is proposed to explain the brittle transgranular cracking. It is based on the influence of the localized anodic dissolution on the enhancement of the plasticity at the crack tip. The formation of dislocation pile-ups and the conditions of restricted slip induce …

The role of friction in the 3ENF and 4ENF delamination tests: an analytical solution

2018

In composite structures, the presence and growth of delamination mechanisms in static or fatigue loading conditions is of paramount interest and the American Society for Testing and Materials (ASTM) has adopted the three-points bend end-notched flexure test (3ENF) as the standard for measurement of mode II toughness. The drawback of the 3ENF test is the unstable crack growth and a modified version of the test, namely the four points bend end-notched flexure test (4ENF), has been proposed. The main advantage of the 4ENF over the 3ENF is that crack growth is stable under displacement control, but it can be strong influenced by the interlaminar frictional effects. The effect of frictional cont…

Correlation of epoxy material properties with the toughening effect of fullerene-like WS2 nanoparticles

2016

Abstract This work deals with the toughening effect of inorganic, fullerene-like WS2 (IF-WS2) nanoparticles (NPs) on epoxy. It has been hypothesized that this toughening effect depends on the epoxy’s cross-link density, its molecular defect fraction or its reference fracture toughness K Ic . Seven different epoxy systems were filled with 0.5% laboratory-made IF-WS2 NPs by mass and investigated in order to analyze which material properties are determining the toughening effect. These NPs were similar to commercially available IF-WS2 NPs, but their agglomerates could not be broken up as successfully and they yielded less toughening effect. The cross-link density of the epoxies measured via dy…

Radio Labelings of Distance Graphs

2013

A radio $k$-labeling of a connected graph $G$ is an assignment $c$ of non negative integers to the vertices of $G$ such that $$|c(x) - c(y)| \geq k+1 - d(x,y),$$ for any two vertices $x$ and $y$, $x\ne y$, where $d(x,y)$ is the distance between $x$ and $y$ in $G$. In this paper, we study radio labelings of distance graphs, i.e., graphs with the set $\Z$ of integers as vertex set and in which two distinct vertices $i, j \in \Z$ are adjacent if and only if $|i - j| \in D$.