Search results for "Tripping"
showing 10 items of 66 documents
Sequestering ability of landfill leachate towards toxic metal ions
2017
The great part of municipal solid wastes is worldwide stored in sanitary landfills. The interaction of organic and inorganic wastes with rainwater produces in the landfill a leachate of extremely variable composition. It depends on several variables such as the type of wastes, the age of landfill, the pH, the redox potential, etc [1-2]. Four are the recognized categories of pollutants in landfill leachate: inorganic macrocomponents, dissolved organic matter (DOM), heavy metals and xenobiotic organic compounds [3]. In particular, heavy metals (arsenic, cadmium, copper, lead, mercury, etc.) are usually present at concentration of few ppb and up to some ppm. A variable but consistent fraction …
Ni/NiO thin film Sensors for Mercury ions detection by Square wave anodic stripping voltammetry
2018
Square wave anodic stripping voltammetry (SWASV) is considered a very interesting electrochemical method for heavy metals detection in comparison to conventional techniques [1]. The main features of this technique are the high sensitivity and reproducibility (standard deviation lower than 5%), besides, the limit of detection is in the ppb level so is comparable with standard techniques such as AAS or ICP, the instrumentation is very inexpensive and easy to use and the detection time is very low. Among heavy metals, mercury is one of the most toxic for both environment and humans. In fact, it may cause serious health problems to brain, kidney and DNA. The concentration limit imposed by US En…
Reverse electrodialysis with NH4HCO3-water systems for heat-to-power conversion
2017
Abstract A Reverse ElectroDialysis Heat Engine (REDHE) system operating with “thermolytic” ammonium hydrogen-carbonate (NH4HCO3) aqueous solutions as working fluids is studied. The engine is constituted by (i) a RED unit to produce electric power by mixing the solutions at different salinity and (ii) a thermally-driven regeneration unit including a stripping and an absorption column to restore the initial salinity gradient thus closing the cycle. In the present work only the RED unit and the stripping column are taken into account. In particular, a simplified integrated process model for the whole cycle was developed: it consists of (i) a lumped parameter model for the RED unit validated wi…
Biochar from byproduct to high value added material – A new adsorbent for toxic metal ions removal from aqueous solutions
2018
Abstract An activated biochar coming from pyrolysis of dead Posidonia oceanica residues has been tested as adsorbent material for Cd2+, Pb2+ and Cu2+ ions. The biomass, the activated and the non activated biochars were previously characterized by using several instrumental techniques. The pH of metal ion solution in kinetic and thermodynamic adsorption experiments was fixed at 5 whilst, the dependence on ionic medium, ionic strength and temperature have been evaluated carrying out batch experiments at different experimental conditions. Differential Pulse Anodic Stripping Voltammetry and Inductively Coupled Plasma Optical Emission Spectroscopy have been used to measure the metal ion concentr…
Electrochemical determination of boron in minerals and ceramic materials
2004
Abstract A method for quantitatively determining boron in minerals and ceramic materials is described. It is based on the abrasive attachment of mixtures of ZnO plus sample to PIGEs. After a reductive deposition step, square wave voltammograms recorded for those modified electrodes immersed into 0.10 M NaCl+0.25 M mannitol provide well-defined stripping peaks at −0.85 and −0.15 V vs. AgCl/Ag for the oxidation of Zn and B, respectively. The quotients between the peak areas and the peak currents for the stripping oxidation of B and Zn vary linearly with the molar ratio of B and Zn in the mixture, thus providing an electrochemical method for determining the boron content in solid samples. Resu…
Purification of recovered phosphoric acid by extracting aluminium with di-2-ethylhexyl phosphoric acid
2021
AbstractThe extraction of aluminium from dilute phosphoric acid with di-2-ethylhexyl phosphoric acid (DEHPA) was optimized using response surface methodology. The optimization was based on the experimental three-level central composite face-centred design (CCF) and was conducted on real-life samples. The three variables included were pH, extractant concentration and aqueous to organic phase ratio (AO). Under the optimized conditions (pH 2.5, 0.6 M DEHPA and AO ratio 1:2), extraction efficiency of 99% for aluminium in four extraction stages is achieved. The purified phosphoric acid solution can then be utilized by the fertilizing industry. Stripping tests for organic phase loaded with alumin…
The pH of the Human Nail Plate
2017
In this chapter, measurements of the nail plate pH are reported. Measurements were conducted in vivo in 37 volunteers with healthy finger- and toenails, using a skin pH meter. The pH of unwashed and washed fin- gernails and the big toenails was measured, and the influence of washing, anatomical site (fin- gers/toes), side (left/right), finger digit (digits 1–5), and gender were determined. The pH of the nail plate surface was around 5. There was no significant difference between the sides, i.e., the right or left hand/foot, among the ten fin- gernails and between the two great toenails. However, toenails had a significantly higher pH than fingernails. Washing the nails caused an immediate, …
Electrochemical identification of metal ions in archaeological ceramic glazes by stripping voltammetry at graphite/polyester composite electrodes
2002
The electrochemical response of metal ions in different samples of coloured ceramic tin-lead glazes attached to graphite/polyester composite electrodes is described. In addition to the ubiquous signals for lead, reductive dissolution processes are followed by anodic stripping peaks for Co, Cu, Sb, Mn, Sn and Fe, enabling the direct identification of such elements in microsamples proceeding from archaeological glazed tiles from Valencia (Spain) workshops (16th-18th century). Additional anodic and cathodic peaks corresponding to redox processes involving metal species in solution generated during stripping processes are also used. Peak potentials, Tafel plots and shape parameters are used for…
Variation in somatic cell count, California mastitis test, and electrical conductivity among various fractions of ewe's milk.
1991
Abstract Variation of three estimates of udder inflammation (SCC, California mastitis test, and electrical conductivity) among the foremilk, machine milk, and hand stripping samples were studied. Foremilk and hand stripping milks were taken from each individual teat; machine milk was taken from the entire udder. For this experiment a total of 30 Manchega ewes were subjected to machine milking during the 9th wk of lactation. Samples were taken in duplicate during two milkings on consecutive mornings. Significant differences were observed in the SCC and electrical conductivity, but not in California mastitis test, between foremilk and stripping milk The stripping fraction had higher SCC (70 ±…
Inverse-voltammetric determination of bismuth in biomaterials with computer assisted peak evaluation. part 3. Bismuth determination in wine, grapes a…
1989
The ultra trace element bismuth is regulary found in wine on an average of about 0.1 ppb. Very low bismuth contents were also determined in soil and different biomaterials. In spite of those very low quantities even speciation experiments show results, so far that about 90% of the bismuth in the grapes is water-soluble, resumably as saccharic acids. For detecting such low quantities a very sensitive method of differential pulse anodic stripping voltammetry was developped. The speciation experiments were carried out by fractional extraction.