Search results for "URIC ACID"
showing 10 items of 343 documents
Cyanuric Acid Oxidationi in UV Irradiated ZnO Suspensions
2008
A tandem-flow assembly for the chemiluminometric determination of hydroquinone
2003
A direct chemiluminescent procedure for determination of hydroquinone based on the emergent flow methodology known as multicommutation or tandem-flow is presented for first time. The manifold was based on a set of three channels and three solenoid valves; and, the determination was performed at 60degreesC and at flow-rate of 7.5 ml min(-1). The complete cycle lasted 35 s, which resulted in a sample flow trough of 103 h(-1). The chemical process was the hydroquinone oxidation with the system sulphuric acid-potassium permanganate; and the light emission was clearly enhanced by the presence of quinine sulphate and benzalkonium chloride reaching a detection limit of 30 Rg l(-1). The dynamic int…
A Fully Automated Assembly Using Solenoid Valves for the Photodegradation and Chemiluminometric Determination of the Herbicide Chlorsulfuron
2005
Abstract This paper presents a new photochemiluminescent system for the determination of chlorsulfuron in water samples. The light from a low‐pressure mercury lamp is used as a clean, reproducible, and inexpensive “reagent” for the derivation of the pesticide, performed in glycine buffer at pH 9.5. Then, the photo‐products from irradiation are oxidized by permanganate in sulfuric acid solution. The oxidation reaction was favored by using high temperatures. A comparative study and discussion about the use of polyphosphoric acid instead of sulfuric acid in the oxidation reaction is also presented. The use of solenoid valves allows for the easy, complete automation of the process with low samp…
Flow injection-chemiluminescence determination of octyl dimethyl PABA in sunscreen formulations
2002
Abstract A sensitive flow injection (FI) procedure was developed for the determination of the UV-filter octyl dimethyl PABA in sunscreen formulations based on its chemiluminescence (CL) induced by potassium permanganate in sulfuric acid. Both second-order and log–log calibration graphs can be used to perform the analysis. Ninety injections per hour can be carried out, which means a sample throughput of 18 h −1 if five injections per solution are performed. The limit of detection (3 σ ) was 25 ng ml −1 . The interference effects of the excipient and other UV filters are studied. Sunscreen formulations containing octyl dimethyl PABA were analysed by both the proposed FI-CL method and a liquid…
Electrochemical detection of uric acid and ascorbic acid using r-GO/NPs based sensors
2021
Abstract A sensitive and selective electrochemical sensor, based on reduced graphene oxide and gold nanoparticles obtained by simple co-electrodeposition, was developed for the detection of uric acid and ascorbic acid. Because of the electrochemical oxidation of both uric and ascorbic acid depending on the pH, the sensor performances were studied at different pH values. Excellent results were obtained for uric acid detection in a linear range from 10 to 500 µmol dm−3 with a sensitivity of 0.31 µA cm−2 µM−1. A limit of detection and quantification of 3.6 µM and 10.95 µmol dm−3, respectively, was calculated. Sensors showed good selectivity toward different interfering species present in the m…
Determination of inorganic species of Sb and Te in cereals by hydride generation atomic fluorescence spectrometry
2011
A non-chromatographic fast, sensitive and easy method has been developed for the determination of Sb(III), Sb(V), Te(IV) and Te(VI) in cereal samples. The procedure is based on ultrasound assisted extraction and determination by hydride generation atomic fluorescence spectrometry (HG AFS). Preliminary studies were made in order to get the best extraction efficiency using 1 mol L-1 phosphoric acid, 1 mol L-1 nitric acid, aqua regia, 1 mol L-1 sulfuric acid and 6 mol L-1 hydrochloric acid. The extraction with aquaregia showed a clear interconversion of the species during the process, being H2SO4 the best extractant with efficiencies greater than 90% from the total content of Sb and Te quantif…
Serum uric acid levels threshold for mortality in diabetic individuals: The URic acid Right for heArt Health (URRAH) project
2022
Background and aim: The URRAH (URic acid Right for heArt Health) Study has identified cut-off values of serum uric acid (SUA) predictive of total mortality at 4.7 mg/dl, and cardiovascular (CV) mortality at 5.6 mg/dl. Our aim was to validate these SUA thresholds in people with diabetes. Methods and results: The URRAH subpopulation of people with diabetes was studied. All-cause and CV deaths were evaluated at the end of follow-up. A total of 2570 diabetic subjects were studied. During a median follow-up of 107 months, 744 deaths occurred. In the multivariate Cox regression analyses adjusted for several confounders, subjects with SUA ≥5.6 mg/dl had higher risk of total (HR: 1.23, 95%CI: 1.04-…
Simultaneous clean up of fish fat containing low levels of residues and separation of PCB from chlorinated pesticides by thin-layer chromatography
1974
Urīnskābes reakcija ar etiķskābes anhidrīdu: diplomdarbs
1937
Electrochemical detection of dopamine with negligible interference from ascorbic and uric acid by means of reduced graphene oxide and metals-NPs base…
2021
Abstract Dopamine is an important neurotransmitter involved in many human biological processes as well as in different neurodegenerative diseases. Monitoring the concentration of dopamine in biological fluids, i.e., blood and urine is an effective way of accelerating the early diagnosis of these types of diseases. Electrochemical sensors are an ideal choice for real-time screening of dopamine as they can achieve fast, portable inexpensive and accurate measurements. In this work, we present electrochemical dopamine sensors based on reduced graphene oxide coupled with Au or Pt nanoparticles. Sensors were developed by co-electrodeposition onto a flexible substrate, and a systematic investigati…