Search results for "Upgrade"
showing 10 items of 116 documents
Hybrid moving bed biofilm reactors: an effective solution for upgrading a large wastewater treatment plant
2009
Over the last few years there has been a growing attention regarding the receiving water body quality state. As a matter of a fact, the Directive 91/271 of the European Union (EU) replaced the “emission standard” concept that fixes discharge limits depending on polluting emission characteristics, with the “stream standard” concept that fixes discharge limits for each polluting substance depending on self-depurative characteristics of the RWB. In this context, several WWTPs need to be upgraded in order to meet stricter effluent limits. The need of WWTP upgrading was also emphasized by the growing urbanization that have led, in most cases, to get overloaded WWTP due to an overcoming of the ma…
Hybrid moving bed biofilm reactors: a pilot plant experiment.
2008
The growing increment of the urbanization and on the other hand, the even more strict effluent limits imposed by the Water Framework Directive for the receiving water body quality state have lead to a need of upgrading several existing WWTP. With this respect HMBBR systems are an innovative solution since allow to upgrade existing high loaded WWTP without building new tanks. However, some uncertainties in their design, maintenance as well as performance have to be addressed due to their recent acquisition compared with well consolidated technologies such as activated sludge systems. In this light, a data gathering campaign on a HMBBR pilot plant has been performed. The aim was to detect the…
Calibration and simulation of two large wastewater treatment plants operated for nutrient removal
2004
Control and optimisation of plant processes has become a priority for WWTP managers. The calibration and verification of a mathematical model provides an important tool for the investigation of advanced control strategies that may assist in the design or optimization of WWTPs. This paper describes the calibration of the ASM2d model for two full scale biological nitrogen and phosphorus removal plants in order to characterize the biological process and to upgrade the plants' performance. Results from simulation showed a good correspondence with experimental data demonstrating that the model and the calibrated parameters were able to predict the behaviour of both WWTPs. Once the calibration an…
Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification for the LHC Run 3
2016
To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the “A Toroidal LHC ApparatuS” (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which each use different physics objects for the trigger selection. The article focusses on the jet Feature EXtractor (jFEX) prototype, one of the three types of Feature Extractors. Up to 2 TB/s have to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget.…
The sROD demonstrator for the ATLAS Tile Calorimeter Upgrade
2012
This work presents the early design of the super Read-Out Driver (sROD) demonstrator board for the Tile Calorimeter Demonstrator project. This project aims to test the new readout electronics architecture for the Phase 2 Upgrade of the ATLAS Tile Calorimeter, replacing the front-end electronics of one complete drawer with the new electronics during the Long Shutdown 2013, in order to evaluate its performance. The sROD demonstrator board will receive and process data from 48 channels. Moreover the sROD demonstrator board will send preprocessed data to the present trigger system, and will transmit trigger control and timing information (TTC) and Detector Control System (DCS) commands to the f…
Design and testing of the high speed signal densely populated ATLAS calorimeter trigger board dedicate to jet identification
2017
Abstract—The ATLAS experiment has planned a major upgrade in view of the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2021. As part of this, the trigger at Level-1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors (three in total), which each uses different physics objects for the trigger selection. The contribution focusses on the jet Feature EXtractor (jFEX) prototype. Up to a data volume of 2 TB/s has to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget. Such requirements translate …
Development of an optical link card for the upgrade phase II of TileCal experiment
2010
This work presents the design of an optical link card developed in the frame of the R&D activities for the phase 2 upgrade of the TileCal experiment as part of the evaluation of different technologies for the final choice in the next two years. The board is designed as a mezzanine which can work independently or plugged in the Optical Multiplexer Board of the TileCal backend electronics. It includes two SNAP 12 optical connectors able to transmit and receive up to 75 Gbps and one SFP optical connector for lower speeds and compatibility with existing hardware as the Read Out Driver. All processing is done in a Stratix II GX FPGA. Details are given on the hardware design including signal and …
Improvement of energy efficiency and quality of street lighting in South Italy as an action of Sustainable Energy Action Plans. The case study of Com…
2015
Abstract Existing street lighting systems, in most of South Italy cities, are often inefficient due to the obsolescence of lamps and luminaires and of ineffective light control systems unable to implement efficient on-off and dimming strategies. Energy efficiency improvement, in street lighting systems, is often one of the key actions to be adopted by Public Administration in their Sustainable Energy Action Plan in the framework of the “Covenant of Majors” activities. As a task of FACTOR 20 project, a set of planning options has been analysed and proposed. Particularly, street lighting efficiency projects have been studied for representative case studies. A detailed survey of the public lig…
Hardware and firmware developments for the upgrade of the ATLAS Level-1 Central Trigger Processor
2014
The Central Trigger Processor (CTP) is the final stage of the ATLAS first level trigger system which reduces the collision rate of 40 MHz to a Level-1 event rate of 100 kHz. An upgrade of the CTP is currently underway to significantly increase the number of trigger inputs and trigger combinations, allowing additional flexibility for the trigger menu. We present the hardware and FPGA firmware of the newly designed core module (CTPCORE+) module of the CTP, as well as results from a system used for early firmware and software prototyping based on commercial FPGA evaluation boards. First test result from the CTPCORE+ module will also be shown.
Searching for long-lived particles beyond the Standard Model at the Large Hadron Collider
2020
Particles beyond the Standard Model (SM) can generically have lifetimes that are long compared to SM particles at the weak scale. When produced at experiments such as the Large Hadron Collider (LHC) at CERN, these longlived particles (LLPs) can decay far from the interaction vertex of the primary proton–proton collision. Such LLP signatures are distinct from those of promptly decaying particles that are targeted by the majority of searches for new physics at the LHC, often requiring customized techniques to identify, for example, significantly displaced decay vertices, tracks with atypical properties, and short track segments. Given their non-standard nature, a comprehensive overview of LLP…