Search results for "Vapo"
showing 10 items of 1217 documents
Nanostructured Pt–TiO2 composite thin films obtained by direct liquid injection metal organic chemical vapor deposition: Control of chemical state by…
2015
Abstract Nanostructured Pt–TiO 2 composite thin films were synthesized by direct liquid injection metal organic chemical vapor deposition process, using trimethyl(methylcyclopentadienyl)platinum and titanium isopropoxide as precursors. Surface and cross-sectional morphologies obtained by scanning electron microscopy and transmission electron microscopy evidenced the uniform distribution of platinum nanoparticles in the TiO 2 matrix. At higher Pt content, the X-ray diffraction analysis showed that the face-centered cubic phase of platinum appeared together with an anatase TiO 2 structure. In addition, as far as the platinum chemical state is concerned, the co-deposition of TiO 2 and Pt allow…
Thermal effects on the growth by metal organic chemical vapour deposition of TiO2 thin films on (100) GaAs substrates
2002
Abstract TiO 2 thin films were deposited on (100) GaAs substrates by LP-MOCVD with deposition temperatures ( T d ) ranking from 450 to 750 °C. The structure of these layers was studied by X-ray diffraction (XRD) and Raman spectroscopy. The growth of the TiO 2 anatase phase was observed for T d T d >600 °C. Finally, X-ray photoelectron spectrometry (XPS) and secondary ion mass spectroscopy (SIMS) experiments showed the presence of small quantities of Ga and As through the whole film thickness, slightly increasing at the surface of the layers. This result was related to the SEM observations and explained by considering the growth conditions.
Core-shell Zn-doped TiO2-ZnO nanofibers fabricated via a combination of electrospinning and metal-organic chemical vapour deposition
2010
Zn-doped TiO2 nanofibers shelled with ZnO hierarchical nanoarchitectures have been fabricated combining electrospinning of TiO2 (anatase) nanofibers and metal-organic chemical vapor deposition (MOCVD) of ZnO. The proposed hybrid approach has proven suitable for tailoring both the morphology of the ZnO external shell as well as the crystal structure of the Zn-doped TiO2 core. It has been found that the Zn dopant is incorporated in calcined electrospun nanofibers without any evidence of ZnO aggregates. Effects of different Zn doping levels of Zn-doped TiO2 fibers have been scrutinized and morphological, structural, physico-chemical and optical properties evaluated before and after the hierarc…
Electrochemical Investigation of Lithium Intercalation in MOCVD Derived Nanostructured Anatase/Rutile TiO2
2011
In this paper we report on the lithium reversible storage in titanium dioxide (TiO2) prepared by metal-organic chemical vapor deposition (MOCVD). Electrochemical properties in terms of lithium reversible insertion depend on the deposited microstructure. For thick films deposited on silicon wafer electrochemical activity of the anatase type of TiO2 is registered in the potential range 1.8-2.1 V vs. Li. For thinner films the intercalation reaction takes place in two potential ranges: 1.8-2.1 V vs. Li and below 1.4 V vs. Li. The second electroactivity range is attributed to lithium insertion into rutile. We found that the decrease of the lower potential limit (0.5 V instead of commonly used 1 …
Lateral Fusion of Chemical Vapor Deposited N = 5 Armchair Graphene Nanoribbons
2017
Bottom-up synthesis of low-bandgap graphene nanoribbons with various widths is of great importance for their applications in electronic and optoelectronic devices. Here we demonstrate a synthesis of N = 5 armchair graphene nanoribbons (5-AGNRs) and their lateral fusion into wider AGNRs, by a chemical vapor deposition method. The efficient formation of 10- and 15- AGNRs is revealed by a combination of different spectroscopic methods, including Raman and UV−visnear-infrared spectroscopy as well as by scanning tunneling microscopy. The degree of fusion and thus the optical and electronic properties of the resulting GNRs can be controlled by the annealing temperature, providing GNR films with o…
Organic solvent desorption from two tegafur polymorphs.
2013
Desorption behavior of 8 different solvents from α and β tegafur (5-fluoro-1-(tetrahydro-2-furyl)uracil) has been studied in this work. Solvent desorption from samples stored at 95% and 50% relative solvent vapor pressure was studied in isothermal conditions at 30 °C. The results of this study demonstrated that: solvent desorption rate did not differ significantly for both phases; solvent desorption in all cases occurred faster from samples with the largest particle size; and solvent desorption in most cases occurred in two steps. Structure differences and their surface properties were not of great importance on the solvent desorption rates because the main factor affecting desorption rate …
Sb-implanted ZnO ultra-thin films
2017
Mild heating of the Zn(C5F6HO2)(2)center dot 2H(2)O center dot CH3(OCH2CH2)(2)OCH3 precursor allowed MOCVD deposition of ZnO films, in a low-pressure horizontal hot-wall reactor, on ITO substrates. The ZnO films were subsequently implanted with Sb ions. XRD measurements provided evidence that they consist of hexagonal, (002) and (101) oriented, crystals. UV-vis spectra showed that the transmittance of these films in the visible region is about 90%. The Sb implanted ZnO film showed a current-voltage characteristic that resembles that of a rectifying diode. This study represents the first example of Sb-implantation in ZnO films obtained by MOCVD.
On the Creeping of Saturated Salt Solutions
2013
Creeping is a well-known but annoying phenomenon in the preparation of crystals from solution, where growing crystallites gradually extend up the walls of the growth vessel. In this process, solution is transported toward the tip of the creeping crystallites, where solvent evaporation takes place and solid material is deposited. In this study, the growth of crystal aggregates extending from evaporating droplets of saturated aqueous solutions of ionic salts, placed on different substrate materials, has been investigated using optical microscopy. It is shown that the rate determining step of the crystallization process is the evaporation of solution, following Fick’s laws. Fresh solution, nec…
Gold based plasmonic stripes co-integrated with low loss Si3N4 platform in aqueous environment
2018
We demonstrate a butt-coupled interface between LPCVD Si 3 N 4 and gold based plasmonic waveguides in aqueous environment, exhibiting 2.3dB coupling loss and 75μm propagation length at 1550nm, towards future employment in biosensing applications.
Halloysite nanotubes filled with MgO for paper reinforcement and deacidification
2021
Abstract A novel material for the deacidification and protection of paper has been designed by using MgO filled halloysite nanotubes (Hal). The ability of MgO loaded nanotubes to control the acidic conditions was evaluated by pH measurements in aqueous solvent. Afterwards, paper was impregnated into hydroxypropyl cellulose dispersions containing the consolidating material. A simulation of strong acidic conditions allowed us to evaluate the deacidification effect of the composite material on the samples. In particular, the paper reaches a pH of 7.7 after 1 h exposition to HNO3 vapours when MgO-Hal nanoparticles are added to the impregnation mixture at a concentration of 10 wt% and it remains…