Search results for "Wire"
showing 10 items of 1383 documents
Investigating the mechanical properties of GeSn nanowires.
2019
Germanium tin (GeSn) has been proposed as a promising material for electronic and optical applications due to the formation of a direct band-gap at a Sn content >7 at%. Furthermore, the ability to manipulate the properties of GeSn at the nanoscale will further permit the realisation of advanced mechanical devices. Here we report for the first time the mechanical properties of GeSn nanowires (7.1-9.7 at% Sn) and assess their suitability as nanoelectromechanical (NEM) switches. Electron microscopy analysis showed the nanowires to be single crystalline, with surfaces covered by a thin native amorphous oxide layer. Mechanical resonance and bending tests at different boundary conditions were use…
A nanostructured sensor of hydrogen peroxide
2017
Abstract A nanostructured electrochemical sensor of hydrogen peroxide was fabricated growing self-standing Pd nanowires (Pd NWs) into polycarbonate (PC) membranes through a simple metal galvanic deposition. Conditions of deposition were adjusted in order to attain 2–5 μm long Pd wires. Characterization of Pd-NWs was performed by scanning electrode microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. Properties of the nanostructured sensor were studied by cyclic voltammetry and chronoamperometry in phosphate buffer—ethanol solution. Addition of pure ethanol to the test solution was essential in order to increase wettability of the nanostructures. Sensing features were comp…
Spin-Polarized Scanning Tunnelling Microscopy of Ultrathin Films
2006
Using low temperature spin-polarized scanning tunneling microscopy we have studied the morphology and magnetic properties of ultrathin Fe(0.5 ML)Au(0.5 ML) nanowires prepared on a Mo(110) single crystal. The Fe nanostripes grown by step flow on a Mo(110) at 700 K were covered by Au at RT, and subsequently annealed at 700 K. Differences in the morphology of Au on Fe(110)/Mo(110) and clean Mo(110) surfaces are observed and discussed. After annealing, the Mo is covered by a homogeneous FeAu ML alloy with several iron enriched islands which reveal an out-of-plane magnetic contrast. Direct lateral exchange coupling has been observed for these islands.
Au nanowire junction breakup through surface atom diffusion.
2018
Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper we perform a series of annealing experiments of gold and silver nanowires and nanowire junctions at fixed temperatures 473, 673, 873 and 973 K (200 degrees C, 400 degrees C, 600 degrees C and 700 degrees C) during a time period of 10 min. We show that nanowires are especially prone to fragmentatio…
A new route to grow oxide nanostructures based on metal displacement deposition. Lanthanides oxy/hydroxides growth
2012
Abstract A metal displacement reaction has been used in order to cause precipitation of oxide nanostructures within pores of anodic alumina membrane (AAM) templates. Here, we focus on the displacement deposition of LnO/OH (Ln = La, Ce, Sm, Er) nanostructures using Zn as sacrificial anode, employing a specific cell arrangement where a galvanic couple was formed between zinc anode and the Au thin layer covering template pore bottom. Progress of displacement deposition reaction into template channels was monitored measuring the open circuit potential as well as pH changes of the electrolyte. A progressive de-activation of the anode surface was observed for long deposition times, caused by depo…
Anodic alumina membranes as template for the synthesis of 1-D metal oxide and hydroxide nanostructures
2008
Anodic alumina membranes with highly ordered cylindrical pores and tuneable geometry have been prepared (pore diameters=20−200 nm; pore density 1012-1014 pores/m2; thickness: 20-100 mm) by controlling the anodizing process of aluminum in phosphoric, oxalic and sulphuric acid. The influence of different parameters (initial treatment of aluminium surface, composition of electrolyte, temperature and applied potential) on the final characteristics of the membranes have been investigated. The use anodic alumina membranes as template for the electrosynthesis of some metal hydroxides and oxides 1-D nanostructures (nanowires and nanotubes) will be also proved.
Conductive films of ordered nanowire arrays
2004
peer-reviewed High-density, ordered arrays of germanium nanowires have been synthesised within the pores of mesoporous thin films (MTFs) and anodized aluminium oxide (AAO) matrices using a supercritical fluid solution-phase inclusion technique. Conductive atomic force microscopy (C-AFM) was utilised to study the electrical properties of the nanowires within these arrays. Nearly all of the semiconductor nanowires contained within the AAO substrates were found to be conducting. Additionally, each individual nanowire within the substrate possessed similar electrical properties demonstrating that the nanowires are continuous and reproducible within each pore. C-AFM was also able to probe the co…
Sensing properties of assembled Bi2S3nanowire arrays
2015
Bismuth sulfide (Bi2S3) nanowires were grown in porous aluminium oxide template and a selective chemical etching was applied to transfer the nanowires to a solution. Well aligned nanowire arrays were assembled on pre-patterned silicon substrates employing dielectrophoresis. Electron beam lithography was used to connect aligned individual nanowires to the common macroelectrode. In order to evaluate the conductometric sensing performance of the Bi2S3 nanowires, current–voltage characteristics were measured at different relative humidity (RH) levels (5–80%) / argon medium. The response of the Bi2S3 nanowires depending of RH is found to be considerably different from those reported for other ty…
Relative Humidity Dependent Resistance Switching of Bi2S3Nanowires
2017
Electrical properties of Bi2S3nanowires grown using a single source precursor in anodic aluminum oxide templates are sensitive to the relative humidity in an inert gas environment. Dynamic sensing dependency is obtained and shows presence of spontaneous resistance switching effect between low and high relative humidity states. Employing the thermionic field emission theory, heights of Schottky barriers are estimated from the current-voltage characteristics and in relation to the humidity response. The change of Schottky barrier height is explained by local changes in physically adsorbed water molecules on the surface of the nanowire.
Energetic stability and photocatalytic activity of SrTiO3 nanowires: ab initio simulations
2015
First principles periodic calculations based on the density functional theory within the localized atomic orbital approach (DFT-LCAO) using the hybrid exchange–correlation potential PBE0 have been performed in order to simulate the structural and electronic properties of both stoichiometric and nonstoichiometric [001]-oriented four-faceted SrTiO3 (STO) nanowires (NW) of cubic structure. Their diameters have been varied from 0.3 up to 2.4 nm with a corresponding consequent change of NW cross-section from 2 � 2t o 5� 5 extension of the lattice constant in bulk. Energetic stability of STO NW (both stoichiometric and non-stoichiometric) has been found to increase with the decrease of their form…