Search results for "X-ray absorption"
showing 10 items of 314 documents
Photocatalytic activity of anatase-nickel ferrite heterostructures
2015
The simple co-precipitation route was used to couple commercial TiO2 anatase nanopowder with nickel ferrite (NiFe2O4). The morphology and the crystalline structure of composite nanoparticles were characterised by TEM, N2 adsorption-desorption, XRD and Rietveld refinement, XPS and XAS. The optical and magnetic properties were investigated. After co-precipitation NiFe2O4 nanoparticles, composed of spinel ferrite crystal phase, were formed on the surface of TiO2 anatase nanopowder. The TiO2/NiFe2O4 composite oxide demonstrated large specific surface area, high visible light absorption efficiency and efficient charge carrier separation, compared to pristine anatase TiO2 or pristine NiFe2O4, rep…
Physicochemical characterization of metal hexacyanometallate–TiO2composite materials
2015
The paper describes the synthesis and characterization of novel TiO2–metal hexacyanometallates (MHCMs) composite materials. The starting material, TiO2, was modified by addition of cobalt-hexacyanoferrate (CoHCF) or iron-hexacyanocobaltate (FeHCC) at various concentrations. The resulting composites were characterized as follows: cyclic voltammetry (CV) followed the formation of TiO2–MHCM clusters, TEM micrographs studied their morphology, XAS and XPS data indicated that MHCM bonds to TiO2 through the nitrogen atom of its –CN group and modifies the environment of Ti compared to that of pure anatase. As expected, and confirmed by UV-Vis and XP-valence band data, the electronic properties of T…
The influence of Sb doping on the local structure and disorder in thermoelectric ZnO:Sb thin films
2023
The experiment at HASYLAB/DESY was performed within the project I-20200161 EC. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01–2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2. This work was carried out in part through the use of the INL Advanced Electron Microscopy, Imaging and Spectroscopy Facility. This work (proposal ID 2018–020-022469) was car…
Synthesis, chemical characterization and preliminary in vitro antitumor activity evaluation of new ruthenium(II) complexes with sugar derivatives
2011
Abstract Three new complexes of Ru(II), namely [RuCl 2 (Glun-N,O) 2 ]Na 2 ( I ; Glun = glucosaminate), [RuCl 2 (1-Tglu)(EtOH) 2 ]Na ( II ; 1-Tglu = 1-thio-β- d -glucose) and [Ru 2 (EtOH) 6 (AL)Cl 4 ] ( III ; AL = 6′-aminolactose) were prepared from the same Ru(II) precursor, [RuCl 2 (DMSO) 4 ] (DMSO = dimethyl sulfoxide). The characterization of the complexes was carried out by elemental analysis, FT-IR, ES-MS, NMR, EXAFS and DFT calculations. The effectiveness of the complexes on metastatic melanoma A 375 was investigated. The results show that complex II is the most active species.
Metal-support and preparation influence on the structural and electronic properties of gold catalysts
2006
Abstract Nanostructured gold catalysts supported on CeO2 and SiO2 were prepared by the deposition–precipitation (DP) and the solvated metal atom dispersion (SMAD) techniques. The structural and electronic properties of the catalysts were investigated by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). Gold was found as small metal nanoparticles (cluster size ∼2 nm) in the SMAD-prepared samples and in ionic state in the DP catalysts. The catalytic activity of the samples was tested in the reaction of low temperature CO oxidation. Gold nanosized particles in a pure metallic state exhibited a worse catalytic performance, both on ceria and…
Structural properties of the quaternary Heusler compound Co2 Cr1−x Fex Al
2006
Abstract The structural and chemical properties of the quaternary Heusler compound Co2 Cr1−x Fex Al were investigated comparing powder and bulk samples. The long range order was determined by means of X-ray diffraction, while the site specific (short range) order was proved by the extended X-ray absorption fine structure method (EXAFS). The chemical composition was analysed by means of X-ray photo emission spectroscopy (XPS) combined with Auger electron spectroscopy (AES) depth profiling. The results from these methods are compared to get a detailed idea about the differences between surface and bulk properties and appearance of disorder in such alloys.
Neural Network Approach for Characterizing Structural Transformations by X-Ray Absorption Fine Structure Spectroscopy
2018
AIF acknowledge support by the US Department of Energy, Office of Basic Energy Sciences under Grant No. DE-FG02 03ER15476. AIF acknowledges support by the Laboratory Directed Research and Development Program through LDRD 18-047 of Brookhaven National Laboratory under U.S. Department of Energy Contract No. DE-SC0012704 for initiating his research in machine learning methods. The help of the beamline staff at ELETTRA (project 20160412) synchrotron radiation facility is acknowledged. RMC-EXAFS and MD-EXAFS simulations were performed on the LASC cluster-type computer at Institute of Solid State Physics of the University of Latvia.
ODS steel raw material local structure analysis using X-ray absorption spectroscopy
2015
Oxide dispersion strengthened (ODS) steels are promising materials for fusion power reactors, concentrated solar power plants, jet engines, chemical reactors as well as for hydrogen production from thermolysis of water. In this study we used X-ray absorption spectroscopy at the Fe and Cr K-edges as a tool to get insight into the local structure of ferritic and austenitic ODS steels around Fe and Cr atoms and its transformation during mechanical alloying process. Using the analysis of X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) we found that for austenitic samples a transformation of ferritic steel to austenitic steel is detectable after …
Structure of Dioxygen Binding Xerogels Incorporating Cyclams Complexed with CuCl2 Salts
2005
X-ray absorption/emission spectroscopies were combined in order to elucidate how hybrid xerogels complexed with CuCl2 could bind reversibly O2. Difference EXAFS analyses at the Cu K-edge revealed the existence of binuclear structures with long Cu...Cu distances, i.e. RCu–Cu ≈ 3.98 A and 3.87 A for the oxygenated and oxygen-free xerogels. In oxygenated xerogels, dioxygen would bridge two Cu atoms in a μ-η1 : η1 peroxo-like conformation. The Cu-O signal found at short distance (RCu−O1 = 1.85 ± 0.01 A) is fully consistent with 40% of O2 molecules being chemisorbed per Cu site. In oxygen-free xerogels, Cl K-edge EXAFS revealed the presence of CuI sites with short Cl-Cu bond lengths (RCl−Cu = 2.…
High-pressure x-ray absorption study of GaTe including polarization
2000
The evolution of the local structure in GaTe under pressure is studied by x-ray absorption spectroscopy experiments at the Ga K-edge (10.368 keV) on oriented single crystals. Taking advantage of the linearly polarized character of synchrotron radiation, the pressure evolution of both the Ga-Te and the in-plane Ga-Ga bond lengths could be determined, in spite of the small amplitude of the latter. Our measurements show that both distances are much less compressible than what could be inferred from the bulk compressibility, which evidences a strong variation of Ga-Ga-Te and Te-Ga-Te angles under pressure. The Te-Te intralayer distance perpendicular to the layers is observed to increase with in…