Search results for "amorphous"
showing 10 items of 790 documents
Optical and morphological properties of infrared emitting functionalized silica nanoparticles
2013
Abstract The loading process of functionalized silica nanoparticles was investigated in order to obtain nanoparticles having functional groups on their surface and Near-Infrared (NIR) emission properties. The NIR emission induced by O 2 loading was studied in silica nanoparticles, produced by pyrogenic and microemulsion methods, with size ranging from 20 to 120 nm. Loading was carried out by thermal treatments in O 2 atmosphere up to 400 °C and 90 bar. The effects of the thermal treatments on the NIR emission and on the structural properties were studied by luminescence and Raman techniques, whereas the morphological features were investigated by Transmission Electron Microscopy and Atomic …
Investigation of molecular gas admixture diffusion, heat transfer and stress state in amorphous solid subjected to thermal infrared radiation
2002
Mathematical model for description of coupled mechanical, thermal, and diffusive processes in semitransparent amorphous solid with molecular gaseous admixture subjected to thermal infrared radiation was developed. Governing equations of the model were derived within thermodynamic model of hard mixture while microscopic considerations were involved for obtaining some constitutive equations. Above coupled processes were investigated in glass layer with either two-atomic CO admixture or three-atomic H2O admixture. Developed model allows design regimes for such technological problems as degassing glass elements of electro-vacuum devices, drying of low electro-conductive solids, deposition of pr…
Dielectric Properties of Al-Nb Amorphous Mixed Oxides
2013
Submitted by Paula Candeias (paula.candeias@lneg.pt) on 2014-02-25T11:53:22Z No. of bitstreams: 1 ECSJournalSolidStateScienceTechnology_N205.pdf: 205716 bytes, checksum: 7b6ac8703b59f9bc280a9cb4082ee0f2 (MD5) Approved for entry into archive by Paula Candeias (paula.candeias@lneg.pt) on 2014-02-25T11:53:42Z (GMT) No. of bitstreams: 1 ECSJournalSolidStateScienceTechnology_N205.pdf: 205716 bytes, checksum: 7b6ac8703b59f9bc280a9cb4082ee0f2 (MD5) Approved for entry into archive by Paula Candeias (paula.candeias@lneg.pt) on 2014-02-25T11:54:01Z (GMT) No. of bitstreams: 1 ECSJournalSolidStateScienceTechnology_N205.pdf: 205716 bytes, checksum: 7b6ac8703b59f9bc280a9cb4082ee0f2 (MD5) Made available i…
Compaction of tungsten oxide films by ion-beam irradiation
1993
Abstract Evaporated amorphous tungsten oxide films with low densities, deposited on different substrates, have been irradiated with various types of ions of different energies up to 30 MeV, and with fluences up to 10 18 cm −2 . Compaction of the films up to nearly the bulk density was observed. No changes of the stoichiometry as determined by various ion-beam analysis techniques were detectable. Raman measurements showed that ion-beam-modified films are also amorphous, but have a different microstructure from as-deposited films. The irradiated films have a higher refractive index than the as-deposited films. A low threshold for the compaction effect of a few times 10 12 ions cm −2 was found…
Structural characterization of mixed Ta–Re oxide films
2006
Thin films of mixed Ta and Re oxides have been produced by reactive dc magnetron co-sputtering of pure Ta and Re metal targets in Ar–O2 atmosphere. The structural evolution of these films has been studied as a function of the composition, starting from a pure tantalum oxide film up to about 82% rhenium content. The composition and the structure of the films have been investigated by using X-ray diffraction and micro-Raman spectroscopy. For low Re content (20%), islands of a well crystallized phase, based on ReO4 groups, appear in the films still composed by pure amorphous tantalum oxide, while a mixed disordered solid phase is found for the highest Re concentration (82%). © 2006 Elsevier B.…
Structural and electrical properties in tungsten/tungsten oxide multilayers
2014
International audience; Tungsten and tungsten oxide periodic nanometric multilayers have been deposited by DC reactive sputtering using the reactive gas pulsing process. Different pulsing periods have been used for each deposition to produce metal-oxide periodic alternations ranging from 3.3 to 71.5 nm. The morphology, crystallinity and chemical composition of these films have been investigated by transmission electron microscopy and energy-dispersive X-ray spectroscopy techniques. The produced multilayers exhibited an amorphous structure and the composition stability of WO3 sub-layers has been pointed out. Moreover, electrical properties have also been studied by the van der Pauw technique…
Adsorption of CO and N 2 molecules at the surface of solid water. A grand canonical Monte Carlo study
2020
International audience; The adsorption of carbon monoxide and nitrogen molecules at the surface of four forms of solid water is investigated by means of grand canonical Monte Carlo simulations. The trapping ability of crystalline Ih and low-density amorphous ices, along with clathrate hy-drates of structures I and II, are compared at temperatures relevant for astrophysics. It is shown that, when considering a gas phase that contains mixtures of carbon monoxide and nitrogen, the trapping of carbon monoxide is favored with respect to that of nitrogen at the surface of all solids, irrespective of the temperature. The results of the calculations also indicate that some amounts of molecules can …
Oxidation of silicon nanoparticles produced by nanosecond laser ablation in liquids
2014
We investigated nanoparticles produced by laser ablation of silicon in water by the fundamental harmonic (1064 nm) of a ns pulsed Nd:YAG. The silicon oxidation is evidenced by IR absorption features characteristic of amorphous SiO2 (silica). This oxide is highly defective and manifests a luminescence activity under UV excitation: two emission bands at 2.7 eV and 4.4 eV are associated with the twofold coordinated silicon, =SiO••.
Metallophthalocyanines as optical active dopants in borate glass
2021
Abstract B2O3 – phthalocyanine composites (B2O3@MPc) were synthesized at 410 °C by sintering boron trioxide doped with base metal-free phthalocyanine (H2Pc) and/or its complexes of Mg, Zn, Gd (Pc = C32H16N8, phthalocyanine ligand, M = metal ion). The glassy products were characterized by scanning electron microscopy (SEM, EDS) and diffuse reflectance spectroscopy (DRS) which confirmed the incorporation of the respective phthalocyanines into the amorphous borate matrix. FTIR results suggested a possible impact of the phthalocyanine dopants on the final solid structure of the glassy matrix. The UV-excited composites emitted a pronounced blue phosphorescence featured by a two-step quenching pr…
Synthesis and Characterization of SiC/MC/C Ceramics (M = Ti, Zr, Hf) Starting from Totally Non-oxidic Precursors
2002
The reaction of poly(dimethylsilane) (PDMS) and poly(dimethylcarbosilane) (PCS) with bis(cyclopentadienyl)M dichloride Cp2MCl2 (M ) Ti, Zr, Hf) complexes has been used as a new route to obtain ceramic materials based on SiC-containing M. The reaction is completed at a relatively low temperature, 900 °C, yielding the corresponding amorphous SiC/MC ceramics which have been characterized by means of 29 Si MAS NMR. These amorphous materials have been treated at higher temperatures, 1350 °C, under a purified argon atmosphere, yielding partially crystallized products which have been studied by X-ray powder diffraction and 29 Si MAS NMR. The effect of the composition of the mixture of precursors is