Search results for "amorphous"
showing 10 items of 790 documents
Characterization of a Superabsorbent Polymer.
2007
We studied an amorphous polymer superabsorbent, able to absorb until 1000 times its weight of water. It is consisted of macromolecular chains, dependent between them by chemical bonds. The swelling of the product in the presence of water gives rise to a polyelectrolytic gel. The chemical analysis of polymer by energy dispersive spectrometry and photoelectrons spectroscopy with a microsounder X showed that the product is homogeneous. It contains carbon, oxygen, and sodium. The measurements of specific surface of the product show that the polymer is nonporous and present a weak surface of about 2.1 m2/g. The thermal study of polymer showed that, under the effect of the temperature and with at…
Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology
2008
Scaffolds suitable for tissue engineering applications like dermal reconstruction were prepared by Thermally Induced Phase Separation (TIPS) starting from a ternary solution PLLA/dioxane/water. The experimental protocol consisted of three consecutive steps, a first quench from the homogeneous solution to an appropriate demixing temperature (within the metastable region), a holding stage for a given residence time, and a final quench from the demixing temperature to a low temperature (within the unstable region). A large variety of morphologies, in terms of average pore size and interconnection, were obtained upon modifying the demixing time and temperature, owing to the interplay of nucleat…
Self-Healing Properties of Bioinspired Amorphous CaCO3/Polyphosphate-Supplemented Cement
2020
There is a strong interest in cement additives that are able to prevent or mitigate the adverse effects of cracks in concrete that cause corrosion of the reinforcement. Inorganic polyphosphate (polyP), a natural polymer that is synthesized by bacteria, even those on cement/concrete, can increase the resistance of concrete to progressive damage from micro-cracking. Here we use a novel bioinspired strategy based on polyP-stabilized amorphous calcium carbonate (ACC) to give this material self-healing properties. Portland cement was supplemented with ACC nanoparticles which were stabilized with 10% (w/w) Na&ndash
Derivatives of indandione and differently substituted triphenylamine with charge-transporting and NLO properties
2015
Abstract Derivatives containing electron-donaiting triphenylamino groups and electron-withdrawing indandione moieties were synthesized and their thermal, electrochemical, photoelectrical and nonlinear optical properties were studied. The synthesized compounds form glasses with the glass transition temperatures ranging from 69 to 118 °C. The ionization potentials of the solid samples of the synthesized materials were found to be in the range of 5.48–5.69 eV. Hole-drift mobilities estimated by xerographic time of flight technique in the amorphous layers of 2-({4-[(4-{[(2E)-1,3-dioxo-2,3-dihydro-1H-inden-2-ylidene]methyl}phenyl)(4-methoxyphenyl)amino]phenyl}methylidene)-2,3-dihydro-1H-indene-1…
Modular approach to obtaining organic glasses from low-molecular weight dyes using 1,1,1-triphenylpentane auxiliary groups: Nonlinear optical propert…
2013
Abstract A new modular synthetic approach to obtain organic glasses from low-molecular weight azobenzenes and stilbenes has been accomplished using 1,1,1-triphenylpentane crystallization preventing auxiliary groups. Six new structures show excellent solubility in non-polar solvents and thin films with good optical qualities have been obtained using a spin-coating technique. The glass transition temperatures of the new amorphous materials were in the range of 73–108 °C. The nonlinear optical activity in thin amorphous films was measured after a corona poling procedure.
Pyranylidene indene-1,3-dione derivatives as an amorphous red electroluminescence material
2011
The organic light-emitting diode (OLED) has promising applications in flat-panel displays and novel light sources. Thus far, OLED structures have mostly been made by thermal evaporation in vacuum. An alternative approach is to use small molecules that form amorphous (glassy) structures from solutions. Such compounds can be used in ink-jet printing technologies and result in reduced OLED prices. We present an original red fluorescent organic compo- und 2-(2-(4-(bis(2-(trityloxy)ethyl)amino)styryl)-6-methyl-4H-pyran-4-ylidene)-1H-indene-1, 3(2H)-dione (ZWK1), and its derivative 2-(2,6-bis(4-(bis(2-(trityloxy)ethyl) amino)styryl)-4H- pyran-4-ylidene)-1H-indene-1,3(2H)-dione (ZWK2), where the m…
Memory effects in MOS capacitors with silicon quantum dots
2001
To form crystalline Si dots embedded in SiO2, we have deposited thin films of silicon-rich oxide (SRO) by plasma-enhanced chemical vapor deposition of SiH4 and O2. Then the materials have been annealed in N2 ambient at temperatures between 950°C and 1100°C. Under such processing, the supersaturation of Si in the amorphous SRO film produces the formation of crystalline Si dots embedded in SiO2. The narrow dot size distributions, analyzed by transmission electron microscopy, are characterized by average grain radii and standard deviations down to about 1 nm. The memory functions of such structures has been investigated in MOS capacitors with a SRO film sandwiched between two thin SiO2 layers …
Characterization of Sn-Co nanowires grown into alumina template
2009
Nanowires of Sn-Co alloys were grown inside the channels of anodic alumina membrane by potentiostatic deposition. The scanning electron microscope images showed the formation of cylindrical nanowires whose height was increasing with deposition time. The X-ray patterns did not show significant diffraction peaks, suggesting the formation of amorphous phases. The higher content of Co in the nanowires, in comparison to the initial composition of the electrolytic bath, was attributed to a higher rate of Co electrodeposition. These nanowires seem to possess specific features suitable for innovative application in the field of Li-ion batteries due to their dimensional stability and high specific s…
Study of silica-based intrinsically emitting nanoparticles produced by an excimer laser
2019
International audience; We report an experimental study demonstrating the feasibility to produce both pure and Ge-doped silica nanoparticles (size ranging from tens up to hundreds of nanometers) using nanosecond pulsed KrF laser ablation of bulk glass. In particular, pure silica nanoparticles were produced using a laser pulse energy of 400 mJ on pure silica, whereas Ge-doped nanoparticles were obtained using 33 and 165 mJ per pulse on germanosilicate glass. The difference in the required energy is attributed to the Ge doping, which modifies the optical properties of the silica by facilitating energy absorption processes such as multiphoton absorption or by introducing absorbing point defect…
Model of partial crystallization and melting derived from small-angle X-ray scattering and electron microscopic studies on low-density polyethylene
1980
A temperature-dependent small-angle x-ray scattering and electron microscopic study on a sample of low-density polyethylene affords a determination of the structure changes in a heating and cooling cycle and suggests a new model of partial crystallization and melting. The analysis of SAXS data is based upon some general properties of the electron-density correlation function. Electron micrographs are obtained from stained sections γ irradiated at elevated temperatures and are analyzed quantitatively by statistical means. According to the model proposed here the thickness distribution in the amorphous layers, rather than that of the crystalline regions, is the essential factor governing the …