Search results for "anodic"
showing 10 items of 163 documents
A new route to grow oxide nanostructures based on metal displacement deposition. Lanthanides oxy/hydroxides growth
2012
Abstract A metal displacement reaction has been used in order to cause precipitation of oxide nanostructures within pores of anodic alumina membrane (AAM) templates. Here, we focus on the displacement deposition of LnO/OH (Ln = La, Ce, Sm, Er) nanostructures using Zn as sacrificial anode, employing a specific cell arrangement where a galvanic couple was formed between zinc anode and the Au thin layer covering template pore bottom. Progress of displacement deposition reaction into template channels was monitored measuring the open circuit potential as well as pH changes of the electrolyte. A progressive de-activation of the anode surface was observed for long deposition times, caused by depo…
Synthesis and characterisation of ordered arrays of mesoporous carbon nanofibres
2009
A facile and reproducible one-step pathway has been developed for preparing ordered arrays of mesoporous carbon nanostructures within the pores of anodized aluminium oxide (AAO) membranes, through the confined self-assembly of phenol/formaldehyde resol and amphiphilic copolymer templates. The morphology of the mesoporous carbon nanostructures can be controlled by varying the copolymer surfactant, the quantity of the resol–surfactant precursor sol used and the amount of phenol–formaldehyde resol introduced into the resol–surfactant sol. One-dimensional (1-D) carbon nanostructures, such as carbon fibres with a core–shell structure and carbon ribbons with circular mesopores running parallel to…
Anodic alumina membranes as template for the synthesis of 1-D metal oxide and hydroxide nanostructures
2008
Anodic alumina membranes with highly ordered cylindrical pores and tuneable geometry have been prepared (pore diameters=20−200 nm; pore density 1012-1014 pores/m2; thickness: 20-100 mm) by controlling the anodizing process of aluminum in phosphoric, oxalic and sulphuric acid. The influence of different parameters (initial treatment of aluminium surface, composition of electrolyte, temperature and applied potential) on the final characteristics of the membranes have been investigated. The use anodic alumina membranes as template for the electrosynthesis of some metal hydroxides and oxides 1-D nanostructures (nanowires and nanotubes) will be also proved.
Abatement of 1,1,2,2-tetrachloroethane in water by reduction at silver cathode and oxidation at boron doped diamond anode in micro reactors
2012
The treatment of aqueous solutions of 1,1,2,2-tetrachloroethane was performed by anodic oxidation at boron doped diamond (BDD), cathodic reduction at silver and coupled processes. Experiments were performed in macro and micro reactors with an interelectrode distance lower than 100. μm. Drastically higher abatements of the chlorinated compound and current efficiencies were obtained in microdevices that, furthermore, allowed to perform the electrolyses with low cell voltages in the absence of supporting electrolyte. When reduction and oxidation processes were carried out simultaneously in the microreactor, a higher abatement of pollutants was obtained with the same amount of the passed charge…
Morphology, physical properties, silver release, and antimicrobial capacity of ionic silver-loaded poly(l-lactide) films of interest in food-coating …
2014
In the present study, silver ions were incorporated into a poly-(l-lactide) (PLA) matrix by a solvent casting technique using different solvents and glycerol as plasticizer. The effect of the different formulations on the morphology, thermal, mechanical and color properties were first evaluated. Additionally, a thorough study of the silver ions release to an aqueous environment was also monitored over time by anodic stripping voltammetry and correlated with the antimicrobial performance against S. enterica. The incorporation of silver contents of up to 1 wt % did not affect morphology, thermal or mechanical properties of the films. A sustainable, antibacterial effectiveness was found for th…
Photoelectrochemical monitoring of rouging and de-rouging on AISI 316L
2017
Electrochemical conditions for inducing rouging on surface of AISI 316L in quasi neutral aqueous solution are studied. Potentiostatic polarization at 0.6 V vs. SSC at pH ∼ 7 allowed growth of colourless passive films with a band gap slightly lower than that estimated for the oxide grown on the SS surface by air exposure due to chromium dissolution. Under stronger anodic polarization (UE = 1.5 V vs. SSC) coloured passive films are formed, mainly constituted by iron oxide according to their band gap (Eg = 2.0 eV). Etching in citric acid at 60 °C results to be effective in removing rouging.
Photoelectrochemical evidence of inhomogeneous composition at nm length scale of anodic films on valve metals alloys
2016
Abstract Anodic films of different thickness (∼30 nm and 70 nm) were grown by anodizing sputtering-deposited Ta-19at% Al to different formation voltages. N incorporation into the anodic films was inducing by performing the anodizing process in ammonium containing solutions. Layered anodic films were prepared by a double formation procedure with a first anodizing step in ammonium biborate solution and second anodizing step in borate buffer solution, or vice versa. Glow Discharge Optical Emission Spectroscopy was employed to show the distribution of N across the oxide. Photoelectrochemical measurements evidenced a red shift of the light absorption threshold due to N incorporation. A model was…
One-step electrochemical synthesis and physico-chemical characterization of CdSe nanotubes
2013
Abstract Stoichiometric CdSe nanotubes (NTs) with a length of ∼700 nm have been successfully grown by one-step electrochemical technique into anodic alumina membranes. Cyclovoltammetric method has been performed using porous anodic alumina as template electrode and an electrochemical bath containing Cd 2+ ions and SeO 2 . The as-prepared NTs have been identified as face-centred-cubic CdSe by XRD, while micro-Raman analysis reveals the typical peaks of nanostructured CdSe. The stoichiometric deposition of CdSe NTs formation is suggested by EDX analysis, with an average atomic percentage of Cd:Se of ∼0.93. Photoelectrochemical measurements reveal that CdSe NTs are photoactive materials with d…
Assessment on the use of the amorphous semiconductor theory for the analysis of oxide films
2015
Abstract Although the theory of Schottky barrier in amorphous semiconductors is generally accepted, the limits of validity of such theory have not yet been explored. The classic semi-analytical solution is obtained under the constraint of constant electronic density of states (DOS) distribution in the mobility gap. In order to take into account the presence of a DOS variable in energy, a semi-empirical corrective power law was introduced in this paper. It is shown that the equations derived for thick films maintain their validity also in the case of thin films, provided that the space charge region width remains lower than 70% of the whole film thickness. A new expression based on the use o…
In situ investigation of sacrificial behaviour of hot dipped AlSi coating in sulphate and chloride solutions
2013
Abstract The electrochemical behaviour of the cut-edge of hot-dipped aluminium–silicon-based alloy coated steel is studied in immersed conditions in sulphate and in chloride media. Preliminary studies performed on steel-pure Al bi-electrode demonstrate that a significant galvanic current can develop at short times (t