Search results for "aqueous solution"

showing 10 items of 1610 documents

Compounds of tungsten(VI) with citric acid: A spectrophotometric, polarimetric and hydrogen-1, carbon-13 N.M.R. study of the formation and interconve…

1986

Tungsten(VI)-citrate complexes, which occur in aqueous solution, were studied by polarimetric and absorbance measurements. The pH of the medium is the principal variable controlling complex formation and interconversion equilibria. At high pH (>6), the stable complexes are monomers with 1∶2 and 1∶1 stoichiometry, depending on the tungsten(VI)-citrate ratio, while at lower pH two different dinuclear complexes are formed. The intervals of existence of these species with the pH, the number of equivalents of acid necessary for their formation, as well as the conditional stability constant, have also been calculated. The structure of these compounds have been investigated by1H and13C-n.m.r. spec…

Aqueous solutionInorganic chemistryMetals and Alloyschemistry.chemical_elementTungstenOxygenCatalysisInorganic Chemistrychemistry.chemical_compoundchemistryStability constants of complexesMaterials ChemistryMoleculeStoichiometryOrganometallic chemistryTransition Metal Chemistry
researchProduct

Mesoporous aluminum phosphite

2009

Abstract High surface area pure mesoporous aluminum-phosphorus oxide-based derivatives have been synthesized through an S+I− surfactant-assisted cooperative mechanism by means of a one-pot preparative procedure from aqueous solution and starting from aluminum atrane complexes and phosphoric and/or phosphorous acids. A soft chemical extraction procedure allows opening the pore system of the parent as-prepared materials by exchanging the surfactant without mesostructure collapse. The nature of the pore wall can be modulated from mesoporous aluminum phosphate (ALPO) up to total incorporation of phosphite entities (mesoporous aluminum phosphite), which results in a gradual evolution of the acid…

Aqueous solutionInorganic chemistryOxideCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsInorganic ChemistryTemplate reactionMesoporous organosilicachemistry.chemical_compoundAtranechemistryMaterials ChemistryCeramics and CompositesPhysical and Theoretical ChemistryPhosphorous acidMesoporous materialPhosphoric acidJournal of Solid State Chemistry
researchProduct

Mesoporous iron phosphate/phosphonate hybrid materials

2014

Abstract Relatively high surface area pure mesoporous iron-phosphorus oxide-based derivatives have been synthesized through an S + I − surfactant-assisted cooperative mechanism by means of a one-pot preparative procedure from aqueous solution and starting from iron atrane complexes and phosphoric and phosphonic acids. A soft chemical extraction procedure allows opening the pore system of the parent as-prepared materials by exchanging the surfactant without mesostructure collapse. The nature of the pore wall can be modulated from iron phosphate up to hybrids involving approximately 30% of organophosphorus entities (phosphonates or diphosphonates). X-ray powder diffraction, transmission elect…

Aqueous solutionInorganic chemistryOxideGeneral ChemistryCondensed Matter PhysicsPhosphonatechemistry.chemical_compoundAtranechemistryMechanics of MaterialsGeneral Materials ScienceIron phosphateHybrid materialMesoporous materialPowder diffractionMicroporous and Mesoporous Materials
researchProduct

Ferromagnetic coupling through a carbonate bridge in the copper (II) chain [Cu(CO3)(4-apy)2] · H2O (4-apy = 4-aminopyridine)

1999

Abstract Atmospheric CO2 fixation by aqueous solutions containing copper(II) bromide and 4-aminopyridine (4-apy) yields the first carbonatobridged copper(II) chain of formula [Cu(CO3)(4-apy)2] · H2O that exhibits an intrachain ferromagnetic coupling.

Aqueous solutionInorganic chemistrychemistry.chemical_elementCrystal structureCopperInorganic ChemistryCoupling (electronics)Crystallographychemistry.chemical_compoundchemistryFerromagnetismBromideMaterials ChemistryCarbonateCupratePhysical and Theoretical ChemistryInorganic Chemistry Communications
researchProduct

Electrochemically assisted anion insertion in Au(I)–Cu(I) heterotrimetallic clusters bearing ferrocenyl groups: Application to the fluoride/chloride …

2010

The heterotrimetallic Au(I)–Cu(I) aggregate [{Au3Cu2(C2C6H4Fc)6}Au3(PPh2C6H4PPh2)3](PF6)2 exhibits a well-defined solid state electrochemistry in contact with aqueous media, based on ferrocenyl-centred oxidation processes involving anion insertion. Upon attachment of microparticulate deposits of the cluster to graphite electrodes, distinctive electrochemical responses can be obtained for fluoride and chloride ions in aqueous media. Keywords: Heterometallic clusters, Gold, Copper, Fluoride/chloride discrimination, Electrochemical anion insertion

Aqueous solutionInorganic chemistrychemistry.chemical_elementElectrochemistryCopperChloridelcsh:Chemistrychemistry.chemical_compoundlcsh:Industrial electrochemistrylcsh:QD1-999chemistryElectrodeElectrochemistrymedicineGraphiteFluorideMetallocenelcsh:TP250-261medicine.drugElectrochemistry Communications
researchProduct

Chromia on silica and zirconia oxides as recyclable oxidizing system: structural and surface characterization of the active chromium species for oxid…

2004

Chromium oxide samples supported over silica and zirconia were prepared by wet impregnation of the supports with aqueous solution of CrO3. In order to investigate the influence of the preparation method on the chromium dispersion and oxidation state, one sample was prepared by sol-gel technique. The materials were structurally characterized by XRD analysis. The oxidation states of chromium species were investigated by XPS, DRS and TPR/TPO techniques. EPR analyses were also carried out for the sample Cr/SiO2, that due to the low crystalline state exhibits broad XPS signals. In this case, particular attention was paid to the presence of Cr(V) and Cr (III) species and their concentration. The …

Aqueous solutionInorganic chemistrychemistry.chemical_elementGeneral ChemistryRedoxTPR/FPO cycleCatalysisChromiaCatalysisChromiumchemistry.chemical_compoundchemistryOxidation stateBenzyl alcoholOxidizing agentchromium supported oxideXPSbenzyl alcohol oxidation
researchProduct

Study of Redox Processes in Zeolite Y-Associated 2,4,6-Triphenylthiopyrylium Ion by Square Wave Voltammetry

2003

The electrochemical responses of 2,4,6-triphenylthiopyrylium ion (TTP+) in solution and attached to zeolite Y (TTP@Y) are described using cyclic and square wave voltammetries upon immersion of zeolite-modified polymer film electrodes in MeCN (LiClO4, Et4NClO4, and BuN4PF6 electrolytes) and aqueous (LiNO3, NaNO3, and KNO3 electrolytes) media. The electrochemistry of TTP@Y in contact with Bu4NPF6/MeCN is identical to that of TTP(BF4) in solution, with reduction processes at −0.25, −0.74, and −1.36 V vs SCE, and oxidation steps at +0.85 and +1.11 V. This response differs from those obtained for TTP@Y in Et4NClO4/MeCN and LiClO4/MeCN electrolytes. In contact with aqueous electrolytes, TTP@Y dis…

Aqueous solutionInorganic chemistrychemistry.chemical_elementSquare waveElectrolyteElectrochemistryRedoxSurfaces Coatings and FilmsIonchemistryElectrodeMaterials ChemistryPhysical and Theoretical ChemistryPlatinumThe Journal of Physical Chemistry B
researchProduct

Solubility of Zn(II) in Association with Calcium Silicate Hydrates in Alkaline Solutions

1999

The binding of Zn(II) to the cement mineral calcium silicate hydrate (CSH) was investigated in a well-defined laboratory system. CSH (Ca:Si = 1:1) was synthesized by coprecipitation with varying contents of Zn(II). Zn(II) was added in the proportions 0, 0.1, 1.0, 5.0, and 10% in exchange for Ca. The resulting CSH was characterized by X-ray diffraction. The solid phases were then equilibrated in aqueous suspensions, and the solubilities of Ca, Si, and of Zn(II) were determined as a function of pH and Zn(II) content in the solid phase. The solubility of Ca and Si in equilibrium with the CSH phases was in agreement with that predicted by thermodynamic calculations. Dissolved Zn(II) concentrati…

Aqueous solutionIon exchangeCoprecipitationInorganic chemistrychemistry.chemical_elementGeneral ChemistryZincchemistry.chemical_compoundchemistryCalcium silicateEnvironmental ChemistryCalcium silicate hydrateSolubilitySolid solutionEnvironmental Science & Technology
researchProduct

Physical origin of Na+/Cl− selectivity of tight junctions between epithelial cells. Nonlocal electrostatic approach

2020

Abstract Tight junctions (TJs) of epithelial cells play a key role in regulation of the ion exchange between NaCl solutions separated by the layer of these cells. Their functioning is based on a strong difference in the permeabilities of these channels for Na+ and Cl− ion migrational fluxes owing to specific properties of the protein network inside TJs. It has been assumed in this study that this phenomenon originates from combination of two effects related to this specific TJ protein (claudin) which segments are partially located inside the TJ space. First, their ionogenic groups create a negative charge distributed inside TJs, thus inducing a difference between the Na+ and Cl− concentrati…

Aqueous solutionIon exchangeTight junctionChemistrySolvation02 engineering and technologyDielectric010402 general chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsElectrostatics01 natural sciencesAtomic and Molecular Physics and Optics0104 chemical sciencesElectronic Optical and Magnetic MaterialsIonChemical physicsMaterials ChemistryMolecule[CHIM]Chemical SciencesPhysical and Theoretical Chemistry0210 nano-technologySpectroscopy
researchProduct

Ionic partition diagram of tetraphenylporphyrin at the water|1,2-dichloroethane interface

2011

diagram of 5,10,15,20-tetraphenyl-21H,23H-porphine (H2TPP) at the water|1,2-dichloroethane interface using a simple Born solvation model. This zone diagram shows under which form this porphyrin is present, i.e. neutral, monoprotonated or diprotonated, and in which phase i.e. either in the aqueous or the organic phase as a function of the aqueous pH and the interface polarisation that can be controlled externally or by the distribution of supporting electrolytes. This diagram explains why the monoprotonated form has been difficult to observe when doing biphasic pH titrations

Aqueous solutionIonic partition diagramStereochemistryGeneral Chemical EngineeringSolvationElectrolytePorphyrinAnalytical Chemistrychemistry.chemical_compoundchemistryPhase (matter)TetraphenylporphyrinElectrochemistryPhysical chemistryITIESJournal of Electroanalytical Chemistry
researchProduct