Search results for "back"

Fine plastic foil as backing for sputtered nickel targets

2013

Targets of 58Ni and 60Ni with areal density between 71 and 105 μg/cm2 backed with polyimide foil of 35–40 μg/cm2 were prepared by sputtering with Ar ions produced by a home made sputtering device at the Target Laboratory, University of Jyväskylä. The efficiency of the procedure was about 20 %.

Mechanism of Heavy Element Retention in Hydrated Layers Formed on Leached Silicate Glasses

1988

ABSTRACTWe have investigated the relationship between hydrated layer formation during aqueous corrosion of silicates and retention of heavy elements (Fe, REE, actinides). Our approach is based on the comparison of the dissolution behaviour of silicate glasses, silicate minerals implanted with increasing doses of lead ions (1×E+12 to 1×E+15 ions/cm2), sorption experiments on silica surfaces and direct precipitation of hydrosilicates. The characterization of reacted surfaces was performed by combining Rutherford backscattering spectrometry (RBS) for profiling heavy elements with Resonant Nuclear Reaction Analysis (RNRA) for hydrogen profilimetry. The accumulation of these elements does not ne…

Advanced time-stamped total data acquisition control front-end for MeV ion beam microscopy and proton beam writing

2013

Many ion-matter interactions exhibit [email protected] time dependences such as, fluorophore emission quenching and ion beam induced charge (IBIC). Conventional event-mode MeV ion microbeam data acquisition systems discard the time information. Here we describe a fast time-stamping data acquisition front-end based on the concurrent processing capabilities of a Field Programmable Gate Array (FPGA). The system is intended for MeV ion microscopy and MeV ion beam lithography. The speed of the system (>240,000 events s^-^1 for four analogue to digital converters (ADC)) is limited by the ADC throughput and data handling speed of the host computer.

SIMULATION OF THERMAL EFFECTS IN OPTOELECTRONIC DEVICES USING COUPLED ENERGY-TRANSPORT AND CIRCUIT MODELS

2008

A coupled model with optoelectronic semiconductor devices in electric circuits is proposed. The circuit is modeled by differential-algebraic equations derived from modified nodal analysis. The transport of charge carriers in the semiconductor devices (laser diode and photo diode) is described by the energy-transport equations for the electron density and temperature, the drift-diffusion equations for the hole density, and the Poisson equation for the electric potential. The generation of photons in the laser diode is modeled by spontaneous and stimulated recombination terms appearing in the transport equations. The devices are coupled to the circuit by the semiconductor current entering the…

Detection of deuterium retention by LIBS at different background pressures

2017

ITER plans foresee the quantitative diagnostics of fuel retention in reactor walls at near-atmospheric pressures. Using laser induced breakdown spectroscopy (LIBS) for this purpose assumes a reliable resolving of Balmer α-lines of hydrogen isotopes in spectra of plasma produced by focused laser radiation onto the target surface. To develop LIBS for quantitative diagnostics of fuel retention during the maintenance breaks of ITER, the effect of background gas pressure on the laser-induced plasma characteristics has been studied. The background pressure limits the expansion rate of plasma and as a result it leads to higher plasma concentrations. At the same time the limiting factor of the reso…

Porous inorganic–organic hybrid material by oxygen plasma treatment

2011

In this paper, we present the pore formation on inorganic–organic hybrid material, ORMOCER©, by reactive ion etching. ORMOCERs are composed of inorganic backbone where organic side groups are attached by cross-linking. Etching of ORMOCER in oxygen plasma generates porous materials with different pore sizes depending on the etching parameters. In addition to planar films, this pore formation process is applicable to micro and nanostructures. Characteristics of porous materials are evaluated by contact angle measurement, scanning electron microscopy, Fourier transform infrared-attenuated total reflectance spectroscopy, time-of-flight elastic recoil detection analysis and Rutherford backscatte…

Desummation of Mixed Powder Diffraction Lines

1991

Determination of Molecular Crystal Structures from X-Ray Powder Diffraction Data

1993

Electrogeneration of Diiodoaurate in Dimethylsulfoxide on Gold Substrate and Localized Patterning

2016

International audience; A localized etching of gold surface by scanning electrochemical microscope technique is presented where a dimethylsulfoxide-based electrolyte charged with iodine is used. The electrogenerated triiodide ion at the platinum ultramicroelectrode tip (feedback mode) acts as an oxidant for gold surface. The effects of electrode diameter and the bias time have been investigated. The approach curve method was used to hold the electrode tip close to the gold surface. A scanning electron microscope is used to observe the etched gold surfaces where disk-shaped dots are generated. The diameter of these holes depends directly on the Pt electrode diameter and the bias time.

Start-up and shutdown thermomechanical transient analyses of the IFMIF European lithium target system

2014

In the framework of the current IFMIF Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) phase, ENEA is responsible for the design of the European concept of the IFMIF lithium target system which foresees the possibility to periodically replace only the most irradiated and thus critical component (i.e., the backplate) while continuing to operate the rest of the target for a longer period (bayonet backplate concept). With the objective of evaluating the performances of the system in terms of temperature, stress and displacement fields evolution during start-up and shutdown phases, an uncoupled thermomechanical transient analysis has been performed in close collaboration w…