Search results for "canning electron microscopy"
showing 10 items of 72 documents
PLA based biocomposites reinforced with Arundo donax fillers
2014
Abstract In this work, for the first time, a natural and almost inexpensive filler obtained by grinding the culms of Arundo donax was used to prepare PLA based biocomposites. The composites were prepared by melt compounding PLA with A. donax filler (ADF). The influence of the content and size of ADF on the morphology and on the mechanical and thermal properties of PLA–ADF composites was evaluated. Moreover, ADF was extracted from composites to evaluate the effect of processing on morphology and dimensions of the incorporated filler. Furthermore, the experimental elastic moduli of the biocomposites have been fitted, employing two theoretical models, i.e., Hill and Halpin–Tsai. The results sh…
Flash microwave synthesis of trevorite nanoparticles.
2008
Nickel ferrite nanoparticles have several possible applications as cathode materials for rechargeable batteries, named 'lithium-ion' batteries. In this study, NiFe{sub 2}O{sub 4} was prepared by microwave induced thermohydrolysis. The obtained nanoparticles were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), BET method, transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). All the results show that the microwave one-step flash synthesis leads in a very short time to NiFe{sub 2}O{sub 4} nanoparticles with elementary particles size close to 4-5 nm, and high specific surfaces (close to 240 m…
Analysis of pectin biopolymer phase states using acoustic emissions.
2019
Acoustic emissions are stress or elastic waves produced by a material under external load. Since acoustic emissions are generated from within and transmitted through the substance, the acoustic signature provides insights into the physical and mechanical properties of the material. In this report, we used a constant velocity probe with force and acoustic emission monitoring to investigate the properties of glass phase and gel phase pectin films. In the gel phase films, a constant velocity uniaxial load produced periodic premonitory acoustic emissions with coincident force variations (saw-tooth pattern). SEM images of the gel phase microarchitecture indicated the presence of slip planes. In …
Structural defects in Hg1−xCdxI2 layers grown on CdTe substrates by vapor phase epitaxy
1997
Hg1−xCdxI2 20–25-μm-thick layers with a uniform composition in the range of x = 0.1–0.2 were grown on CdTe substrates by vapor phase epitaxy (VPE). The growth was carried out using an α-HgI2 polycrystalline source at 200 °C and in the time range of 30–100 h. The layers were studied by scanning electron microscopy (SEM) and high resolution synchrotron x-ray topography (SXRT). The SEM and SXRT images of Hg1−xCdxI2 VPE layers allow one to identify the defects affecting the layer structure. The two main types of structural defects in the layers are subgrain boundaries and densely spaced striations similar to those referred generally to as vapor grown HgI2 bulk crystals. The effect of the growth…
Microscopic observations of superficial ultrastructure of unworn siloxane-hydrogel contact lenses by cryo-scanning electron microscopy
2006
The purpose of this study was to analyze three commercial siloxane-hydrogel contact lens materials, lotrafilcon A, balafilcon A, and galyfilcon A, by cryogenic scanning electron microscopy (cryoSEM). The fully hydrated lenses were frozen in slush liquid nitrogen and qualitatively observed in a cryogenic scanning electron microscope. The superficial ultrastructure of the siloxane-hydrogels was observed at the areas where the lens fractured during sample cryogenic preparation. There are qualitative differences among the three examined materials in the complex polymer network structure existing between the outer layer and the underlying polymer. CryoSEM, although destructive, is a useful tool …
Scanning electron microscopy study of twins in ZnSe single crystals grown by solid-phase recrystallization
2001
ZnSe single crystals were grown from n-type microcrystalline boules by a solid phase recrystallization (SPR) method. During SPR, twinned regions appear with different electronic recombination properties. The recrystallizations were performed under different atmospheres, Ar or Se, and pressures to investigate the influence of growth conditions on these structural features. Recombination properties were studied by means of cathodoluminescence (CL) and remote-electron beam induced current (REBIC). Wavelength dispersive X-ray (WDX) mappings were also performed to analyze possible differences in stoichiometry related to the presence of extended defects.
Individual arc-discharge synthesized multiwalled carbon nanotubes probed with multiple measurement techniques
2020
Arc-discharge synthesized multiwalled carbon nanotubes (AD-MWNT), or related MWNTs, exhibit a good quality compared to the more common type of MWNT synthesized by catalytic chemical vapor deposition methods. Yet experimental measurements on these are rather few and typically have not correlated data from different measurement techniques. Here, the authors report Raman spectroscopy, scanning probe microscopy, conductivity measurements, and force microscopy on single AD-MWNTs. The results demonstrate the high quality of AD-MWNTs and are compatible with the view of them as the best approximation of MWNTs as an assembly of defect-free concentric individual single-walled carbon nanotubes. The au…
Effects of Metal-Organic Chemical Vapour Deposition grown seed layer on the fabrication of well aligned ZnO nanorods by Chemical Bath Deposition
2011
Well aligned, long and uniform ZnO nanorods have been reproducibly fabricated adopting a two-steps Metal-Organic Chemical Vapour Deposition (MOCVD) and Chemical Bath Deposition (CBD) fabrication approaches. Thin (<100 nm) ZnO buffer layers have been seeded on silicon substrates by MOCVD and ZnO layers have been subsequently grown, in form of well textured nanorods, using CBD. It has been found that the structure and thickness of the seed layer strongly influence the final morphology and the crystal texturing of ZnO nanorods as well as the CBD growth rate. There is, in addition, a strong correlation between morphologies of CBD grown ZnO nanorods and those of the seed layer underneath. Thus, …
Corrigendum: Flor Yeast Diversity and Dynamics in Biologically Aged Wines
2019
International audience; [This corrects the article DOI: 10.3389/fmicb.2018.02235.].
Interactions in dual species biofilms between Listeria monocytogenes EGD-e and several strains of Staphylococcus aureus.
2008
International audience; Six environmental isolates of Staphylococcus aureus and one collection strain were investigated for their ability to form monospecies biofilms and dual species biofilms with Listeria monocytogenes EGD-e on stainless steel coupons. All isolates were able to grow as biofilms but their ability to form monospecies biofilms differed. The population of L. monocytogenes EGD-e in dual species biofilms was not affected by the presence of S. aureus isolates except for strain CIP 53.156. The effect of L. monocytogenes EGD-e on the population of S. aureus was strain dependent: S. aureus population either increased or decreased or was not affected in the presence of L. monocytoge…