Search results for "cerium"

showing 10 items of 140 documents

Influence of vinyltriethoxysilane concentration on structural and luminescent characteristics of cerium doped yttrium based silicate phosphors

2015

Abstract Cerium doped yttrium silicates phosphors (YSO:Ce) were prepared by gel combustion using vinyltriethoxysilane (VTEOS) as silicon sources along with aspartic acid as fuel and yttrium-cerium nitrate as oxidizer. The study presents the influence of VTEOS amount in the synthesis mixture on the structural and luminescent characteristics of silicate phosphors. The understanding of precursor׳s decomposition was achieved on the basis of thermal analysis in association with gas evolved analysis. XRD, FTIR and XPS were used to reveal the structural changes that occur with VTEOS molar amount variation from 1 to 3 mol. It was found that the main crystalline phase was X2-Y 2 SiO 5 . The luminesc…

Materials scienceVinyltriethoxysilaneSiliconProcess Chemistry and TechnologyDopingInorganic chemistrychemistry.chemical_elementPhosphorYttriumSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsCeriumchemistryMaterials ChemistryCeramics and CompositesThermal analysisLuminescenceCeramics International
researchProduct

An improved system for fast, continuous chemical separations (“SISAK 2”) in nuclear spectroscopic studies

1980

Abstract An improved rapid, continuous solvent extraction system (“SISAK 2”) is described. The system is connected to a gas-jet installed at the Mainz reactor. It allows single or multistage chemical separations of liquid phases by means of specially designed centrifuges within ∼1 s per stage. The application of this system to study short-lived nuclides is exemplified for neutron-rich lanthanum and cerium isotopes produced by fission.

Materials sciencechemistryFissionRadiochemistryLanthanumchemistry.chemical_elementGeneral MedicineNuclideSolvent extractionCerium IsotopesNuclear Instruments and Methods
researchProduct

Antiviral efficacy of cerium oxide nanoparticles.

2022

The authors gratefully acknowledge the financial support by the Estonian Research Council Grants (COVSG2, PRG629, PRG1496), Estonian Centre of Excellence in Research project “Advanced materials and high-technology devices for sustainable energetics, sensorics and nanoelectronics” TK141 (2014-2020.4.01.15-0011) and University of Tartu Development Fund (PLTFYARENG53). The research was partly conducted using the NAMUR+ core facility funded by projects “Center of nanomaterials technologies and research” (2014-2020.4.01.16-0123) and TT13.

MultidisciplinarySilverSARS-CoV-2HumansMetal NanoparticlesCOVID-19Nanoparticles:NATURAL SCIENCES::Physics [Research Subject Categories]CeriumSilicon DioxideAntiviral AgentsScientific reports
researchProduct

Influence of cerium content and heat treatment on Ce:YAG@glass wool nanostructures

2019

The paper reports the influence of cerium content and heat treatment on composition, structural features and optical properties of nanostructures constituted by a layer of Ce:YAG nanoparticles on glass wool (Ce:YAG@GW). The Ce:YAG@GW nanostructures were obtained embedding the glass wool (GW) in a gel-like precursor and calcining at 800 and 900 °C. Gel-like precursor of urea glass route (UGR) method has been used to prepare both nanostructures and Ce:YAG nanoparticles prepared as references. Structural properties were investigated by using X-ray diffraction (XRD) and infrared spectroscopy (IR). Results showed that the composition of the final products strongly depends both on the cerium cont…

NanostructureMaterials scienceLayer of nanoparticlechemistry.chemical_elementInfrared spectroscopyNanoparticleBioengineeringGlass wool02 engineering and technologyUrea glass route010402 general chemistry01 natural scienceslaw.inventionlawGeneral Materials ScienceCalcinationGeneral Chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsGlass woolAtomic and Molecular Physics and Optics0104 chemical sciencesCeriumYAGchemistryChemical engineeringModeling and SimulationSynthetic routeQuantum efficiency0210 nano-technologyLuminescenceJournal of Nanoparticle Research
researchProduct

Template electrosyntesis of CeO2 nanotubes

2007

Nanotube arrays of CeO2 were produced in a single step by potentiostatic electrochemical deposition from a non-aqueous electrolyte, using anodic alumina membrane templates. The CeO2 nanotubes showed a polycrystalline structure, and they were assembled in the membrane nanochannels. The nanotubes had somewhat uniform diameters, with an average external value of about 210 nm, and a maximum length of about 60 µm; the latter parameter was controlled by the electrodeposition time. Each single nanotube was found to consist of crystalline grains having a size of about 3 nm. Raman analysis shows that these CeO2 nanotubes are suitable for catalytic applications.

NanotubeMaterials scienceMechanical EngineeringBioengineeringNanotechnologyGeneral ChemistryElectrolyteCerium compoundsElectrocatalysisElectrodepositionGrain size and shapePolycrystalline materialsSynthesis (chemical)ElectrosynthesisElectrochemistrysymbols.namesakeMembraneSettore ING-IND/23 - Chimica Fisica ApplicataChemical engineeringMechanics of MaterialssymbolsGeneral Materials ScienceCrystalliteElectrical and Electronic EngineeringRaman spectroscopyDeposition (law)
researchProduct

Cerium oxyhydroxide nanowire growth via electrogeneration of base in nonaqueous electrolytes

2008

The preparation of compact cerium oxyhydroxide nanowires into anodic alumina membranes from cerium chloride in ethanol solution via electrogeneration of base is reported. Scanning electron microscopy analyses indicate that dense, well-aligned, and highly ordered nanowires can be formed in a wide range of applied potentials and current densities in alcoholic solution. The employment of water brings to a hybrid nanotube/nanowire structure, suggesting a key role of the electrolyte nature in determining the morphology of the deposit. Electrochemical findings and X-ray diffraction analysis have shown that nanowires are constituted by a Ce(III)/Ce(IV) oxyhydroxide that can be completely oxidized …

NanotubeMaterials scienceNanostructureScanning electron microscopeNanowiresGeneral Chemical EngineeringCeO2 nanowire electrogeneration of baseInorganic chemistryNanowirechemistry.chemical_elementThermal treatmentElectrolyteCerium oxideElectrochemistryChlorideCeriumSettore ING-IND/23 - Chimica Fisica ApplicatachemistryElectrochemistrymedicineGeneral Materials ScienceElectrical and Electronic EngineeringPhysical and Theoretical Chemistrymedicine.drug
researchProduct

Luminescence Properties and Energy Transfer Processes in Nanosized Cerium Doped YAG

2008

Luminescence properties of cerium doped Y3Al5O12 (YAG) nanocrystals in form of nanopowders and nanoceramics have been studied. The comparative analysis of luminescence characteristics for nano- and single-crystals has been done. It was detected that an excitonic mechanism of the energy transfer from the host lattice to cerium ions does not work in nanopowders and nanoceramics. It was also shown that antisite-related and self-trapped exciton-related luminescence bands are suppressed strongly in nanopowders, and it can be excited only under certain circumstances. These bands practically disappeared in the nanoceramic samples. It was suggested that nanoparticle's surface, which is an efficient…

Nuclear and High Energy PhysicsPhotoluminescenceMaterials scienceCondensed Matter::OtherDopingPhysics::Opticschemistry.chemical_elementNanoparticlePhotochemistryNanoceramicCondensed Matter::Materials ScienceCeriumNuclear Energy and EngineeringNanocrystalchemistryPhysics::Atomic and Molecular ClustersCharge carrierElectrical and Electronic EngineeringLuminescenceIEEE Transactions on Nuclear Science
researchProduct

Light absorption and conversion in solar cell based on Si:O alloy

2013

Thin film Si:O alloys have been grown by plasma enhanced chemical vapor deposition, as intrinsic or highly doped (1 to 5 at. % of B or P dopant) layers. UV-visible/near-infrared spectroscopy revealed a great dependence of the absorption coefficient and of the optical gap (Eg) on the dopant type and concentration, as Eg decreases from 2.1 to 1.9 eV, for the intrinsic or highly p-doped sample, respectively. Thermal annealing up to 400 °C induces a huge H out-diffusion which causes a dramatic absorption increase and a reduction of Eg, down to less than 1.8 eV. A prototypal solar cell has been fabricated using a 400 nm thick, p-i-n structure made of Si:O alloy embedded within flat transparent c…

Open circuit voltageSiliconAbsorption co-efficientMaterials scienceAnnealing (metallurgy)Analytical chemistryGeneral Physics and AstronomyPhotovoltaic effectChemical vapor depositionSettore ING-INF/01 - Elettronicalaw.inventionPlasma enhanced chemical vapor depositionOut-diffusionPlasma-enhanced chemical vapor depositionlawSolar cellDoping (additives)Thin filmAbsorption (electromagnetic radiation)Infrared spectroscopyElectrical analysiDopantDopingP-i-n structureDevice fabricationThermal-annealingSolar cells Silicon alloysPhotovoltaicTransparent conductive oxides Cerium alloyJournal of Applied Physics
researchProduct

OH/OD-IR absorption bands in SrxBa1−xNb2O6

1995

Single crystals of Sr x Ba 1−x Nb 2 O 6 (SBN) with congruent composition (x = 0.61) and Sr 0.61 Ba 0.39 Nb 2 O 6 crystals doped with various concentrations of cerium are grown with the Czochralski method. A subsequent doping of the crystals with protons and deuterons is performed either by hydrothermal high temperature treatment or by field supported hydrogen diffusion at elevated temperatures in humid atmosphere. The presence of the protons is revealed by the infrared absorption of the OH stretching vibration. This broad OH absorption band is essentially the same for Sr 0.61 Ba 0.39 Nb 2 O 6 and Sr 0.61 Ba 0.39 Nb 2 O 6 :Ce (0.025 wt% CeO 2 ). It shows a polarization dependence with respec…

OvertoneDopingAnalytical chemistrychemistry.chemical_elementInfrared spectroscopyMineralogyTungstenCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsTetragonal crystal systemCeriumchemistryAbsorption bandAbsorption (electromagnetic radiation)Physica Status Solidi (a)
researchProduct

Étude par microscopie électronique et spectroscopie de films minces catalytiques pour micro piles à combustibles

2016

Předložená dizertační práce se zabývá studiem nových katalyzátorů na bázi kov-oxid vhodných pro použití v palivových článcích na straně anody. Platinou dopovaný oxid ceru připravený magnetronovým naprašováním ve formě tenkých vrstev na uhlíkových mezivrstvách nesených křemíkovým substrátem byl zkoumán prostřednictvím mikroskopických a spektroskopických metod. Vliv složení uhlíkového nosiče (a-C a CNx filmy), depozičního času CeOx vrstvy a dalších depozičních parametrů, např. depoziční rychlosti, složení pracovní atmosféry a Pt koncentrace na morfologii Pt-CeOx vrstev byl studován převážně pomocí transmisní elektronové mikroskopie (TEM). Získané výsledky ukazují, že vhodnou kombinací depozič…

Palivové článkyFuel cellTransmisní elektronový mikroskopCer oxidCerium oxidePulvérisation cathodique magnétron[CHIM.THEO] Chemical Sciences/Theoretical and/or physical chemistryMagnetronové naprašováníOxyde de cériumPlatinePile à combustiblePlatinaTransmission Electron MicroscopyMicroscopie électronique en transmissionMagnetron sputteringPlatinum
researchProduct