Search results for "characterization"

Large 256-Pixel X-ray Transition-Edge Sensor Arrays With Mo/TiW/Cu Trilayers

2015

We describe the fabrication and electrical characterization of 256-pixel X-ray transition-edge sensor (TES) arrays intended for materials analysis applications. The processing is done on 6-in wafers, providing capabilities on a commercial scale. TES films were novel proximity coupled Mo/TiW/Cu trilayers, where the thin TiW layer in between aims to improve the stability of the devices by preventing unwanted effects such as Mo/Cu interdiffusion. The absorber elements were electrodeposited gold of thickness 2 μm. The single-pixel design discussed here is the so-called Corbino geometry. Most design goals were successfully met, such as the critical temperature, thermal time constant, and transit…

Characterization of prehispanic cosmetics found in a burial of the ancient city of Teotihuacan (Mexico)

2012

The present paper reports the chemical data obtained on samples of pigmenting materials contained in 31 miniature vessels found in a burial found in Teopancazco, a multiethnic neighborhood center located in the southeastern sector of the archaeological site of Teotihuacan (Central Mexico) and the analytical protocol established for the complete characterization of these archaeological materials. For this purpose a multi-technique approach based on the combination of several non destructive and micro-destructive instrumental techniques, namely, light microscopy (LM), scanning electron microscopy-X-ray micro-analysis (SEMe EDX), transmission electron microscopy (TEM), voltammetry of micropart…

Integrated methodologies for qualitative and quantitative characterization of historical pigments

2014

A structural comparison of halloysite nanotubes of different origin by Small-Angle Neutron Scattering (SANS) and Electric Birefringence

2018

The structure of halloysite nanotubes (Hal) from different mines was investigated by Small-Angle Neutron Scattering (SANS) and Electric Birefringence (EBR) experiments. The analysis of the SANS curves allowed us to correlate the sizes and polydispersity and the specific surfaces (obtained by a Porod analysis of the SANS data) of the nanotubes with their specific geological setting. Contrast matching measurements were performed on patch Hal (from Western Australia) in order to determine their experimental scattering length density for a more precise analysis. Further characterization of the mesoscopic structure of Hal was carried out by Electric Birefringence (EBR), which allowed to study th…

Mechanical characterization of TiO2 nanofibers produced by different electrospinning techniques

2015

Abstract In this work TiO2 nanofibers produced by needle and needleless electrospinning processes from the same precursor were characterized and compared using Raman spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and in situ SEM nanomechanical testing. Phase composition, morphology, Young's modulus and bending strength values were found. Weibull statistics was used to evaluate and compare uniformity of mechanical properties of nanofibers produced by two different methods. It is shown that both methods yield nanofibers with very similar properties.

Application of WGM Resonances to the Measurement of the Temperature Increment of Ho and Ho-Yb Doped Optical Fibers Pumped at 1125 and 975 nm

2021

Optical fiber characterization using whispering gallery mode resonances of the fiber itself has been demonstrated to be a powerful technique. In this work, we exploit the thermal sensitivity of whispering gallery mode resonances to characterize the pump-induced temperature increment in holmium doped and holmium-ytterbium codoped optical fibers. The technique relies on the measurement of the resonances’ wavelength shift due to temperature variation as a function of the pump power. Holmium doped fibers were pumped to the second excited level 5I6 of the Ho3+ ion using a laser diode at 1125 nm and ytterbium-holmium codoped fibers to the 2F5/2 level of the Yb3+ ion by a laser diode at 975 nm. Ou…

Cross-Media Color Reproduction and Display Characterization

2012

International audience; In this chapter, we present the problem of cross-media color reproduction, that is, how to achieve consistent reproduction of images in different media with different technologies. Of particular relevance for the color image processing community is displays, whose color properties have not been extensively covered in previous literature. Therefore, we go more in depth concerning how to model displays in order to achieve colorimetric consistency. The structure of this chapter is as follows: After a short introduction, we introduce the field of cross-media color reproduction, including a brief description of current standards for color management, the concept of colori…

Characterization of the Clarke regularity of subanalytic sets

2017

International audience; In this note, we will show that for a closed subanalytic subset $A \subset \mathbb{R}^n$, the Clarke tangential regularity of $A$ at $x_0 \in A$ is equivalent to the coincidence of the Clarke's tangent cone to $A$ at $x_0$ with the set \\$$\mathcal{L}(A, x_0):= \bigg\{\dot{c}_+(0) \in \mathbb{R}^n: \, c:[0,1]\longrightarrow A\;\;\mbox{\it is Lipschitz}, \, c(0)=x_0\bigg\}.$$Where $\dot{c}_+(0)$ denotes the right-strict derivative of $c$ at $0$. The results obtained are used to show that the Clarke regularity of the epigraph of a function may be characterized by a new formula of the Clarke subdifferential of that function.

Spectral phase reconstruction of femtosecond laser pulse from interferometric autocorrelation and evolutionary algorithm

2021

International audience; We report on the complete temporal characterization of femtosecond laser pulses from second-order interferometric autocorrelation and laser spectrum measurements. The method exploits a newly developed autocorrelator based on a two photon-absorption signal produced directly within a camera sensor so as to provide a single-shot interferometric autocorrelation of great reliability and robustness. Interferometric autocorrelation trace and laser spectrum are exploited for a spectral phase retrieval via an evolutionary algorithm. The quality of the reconstruction for highly modulated spectral phases imprinted by a pulse shaper confirms the reliability of the method. The au…

Generalisation and experimental validation of design rules for self-phase modulation-based 2R regenerators

2007

We report the design of 2R-regenerators based on self-phase modulation in lossy fibers. We experimentally demonstrate the applicability of the proposed scaling rules and present detailed characterization of the pulse characteristics at the regenerator output.