Search results for "cladding"

MoSi2 laser cladding—elaboration, characterisation and addition of non-stabilized ZrO2 powder particles

2003

International audience; The cladding process using laser beam radiation comprises different operational regimes, depending on the involved lasers (usually CO2 or Nd:YAG) and materials. A series of experiments has been carried out to investigate Nd:YAG laser cladding using MoSi2 powder. Procedures and operating parameters for producing clad layers has been developed and their properties evaluated. The feasibility of the laser cladding technique, using a high power Nd:YAG laser, by projecting MoSi2 powder on steel substrate was demonstrated. The results indicate a low density of cracks, elevated powder catchment efficiency (between 65 and 90%) and hardness values around 1200–1300 HV. Our goal…

Magnesium alloys (WE43 and ZE41) characterisation for laser applications

2004

International audience; One of the most important parameters in laser treatment is the quantity of beam energy absorbed by the substrate. Despite its important role played in laser processes, this factor is rarely available for the laser sources wavelengths and at high temperatures reached during such treatments. A series of experiments were carried out in order to characterise, from this point of view, two types of magnesium alloys, WE43 and ZE41, often used in laser applications (cladding, alloying, welding, etc.). The results represent an important step in order to understand Mg-alloys behaviour under laser beam action.

MoSi2 laser cladding—A new experimental procedure: double-sided injection of MoSi2 and ZrO2

2003

International audience; In the last decade, development of low density advanced material systems for service at temperatures up to 1300 °C was one of the goals of many researches. This kind of material should mainly have moderate fracture toughness and should exhibit oxidation resistant behaviour at low and intermediate temperature. One of the most studied materials continues to be the intermetallic compound MoSi2. The molybdenum disilicide has been considered as an attractive candidate due to its melting point (2030 °C) and excellent oxidation resistance at high temperatures. The main problem associated with the MoSi2 layer synthesized using laser beam is the layer fragility. To avoid this…

2018

We present the design, fabrication and characterization of long-range surface plasmon polariton waveguide arrays with materials, mainly silicones, carefully selected with the aim to be used as mechanically flexible single-mode optical interconnections, the so-called “plasmonic arc” working at 1.55µm. The fabricated plasmonic arcs show a TM/TE polarization ratio of ~25 dB. By using the cut-back method, the straight propagation loss at 1.55µm is estimated to 0.5-1 dB/mm and coupling loss to ~1-2 dB/facet after dicing. In the free-standing S-curved configuration, the bending loss of single cladding plasmonic arc is 2.2-2.8 dB/90° at bending radius 2.5 mm. For double cladding plasmonic arcs, it…

Monitoring the Etching Process in LPFGs towards Development of Highly Sensitive Sensors

2017

Trabajo presentado en la Eurosensors 2017 Conference. París, 3–6 de septiembre de 2017. In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift of the resonance bands during the etching process it is possible to check the quality of etching process (the 80 µm fibre performs better than de 125 µm fibre), and to stop for a specific cladding mode coupling, which permits to obtain an improved sensitivity compared to the initial structure. This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo…

Spatial soliton formation in photonic crystal fibers

2003

We demonstrate the existence of spatial soliton solutions in photonic crystal fibers (PCF's). These guided localized nonlinear waves appear as a result of the balance between the linear and nonlinear diffraction properties of the inhomogeneous photonic crystal cladding. The spatial soliton is realized self-consistently as the fundamental mode of the effective fiber defined simultaneously by the PCF linear and the self-induced nonlinear refractive indices. It is also shown that the photonic crystal cladding is able to stabilize these solutions, which would be unstable otherwise if the medium was entirely homogeneous.

Label-free wavelength and phase detection based SMS fiber immunosensors optimized with cladding etching

2018

The performance of E-SMS (Etched Singlemode-Multimode-Singlemode) optical fiber structures as immunosensors has been assessed by the implementation of antibody/antigen immunoassays. Through this procedure it has been proven that E-SMS structures are effective and suitable optical platforms for label-free biosensing. Using the phase shift and tracking the wavelength response it was found that the fabricated E-SMS devices exhibited limits of detection (LOD) down up to concentrations of 0.2mg/L of antigens in solution. This was achieved by coating the E-SMS with an antibody-based biolayer (goat IgG) that is able to determine the presence of anti-goat IgG antigen. Both a wavelength detection an…

Spectral properties and lifetime of green emission in γ-ray irradiated bismuth-doped silica photonic crystal fibers

2018

Abstract We report an experimental investigation focused on the green emission detected in γ-ray irradiated Bismuth-doped photonic crystal fibers. Our photoluminescence spectra, recorded at room temperature, provide evidence for the presence of two emission bands both located at ~ 530 nm (2.34 eV). One emission is detected only in the Bi-doped core while the other, is detected in the cladding. These two emissions feature different excitation spectra and a fast and a slow decay lifetime. The origin of the fast emission decay, about ten nanoseconds, is tentatively attributed to a silica intrinsic defect, whereas the slow component, having lifetime of about 2 μs and featuring anti-stokes emiss…

Broadband tuning of a long-cavity all-fiber mode locked Thulium-doped fiber laser using an acousto-optic bandpass filter

2019

A long-cavity passively mode-locked thulium-doped all-fiber laser is reported incorporating a tapered acousto-optic tunable bandpass filter (AOTBF). The operation of the AOTBF relies on the intermodal coupling between core and cladding modes when a flexural acoustic wave propagates along an 80-microm tapered fiber. The filter works in transmission and exhibits a 3-dB bandwidth of 9.02 nm with an insertion loss of 3.4 dB. The laser supports ultrashort pulse generation at a low repetition rate of 784.93 kHz. Optical pulses with 2.43 nm of optical bandwidth and 2.1 ps pulse duration were obtained in a broad tuning range from 1824.77 to 1905.16 nm.

Cladding-Pumped Erbium/Ytterbium Co-Doped Fiber Amplifier for C-Band Operation in Optical Networks

2021

Space-division multiplexing (SDM) attracts attention to cladding-pumped optical amplifiers, but they suffer from a low pump power conversion efficiency. To address this issue, ytterbium (Yb3+) and erbium (Er3+) co-doping is considered as an effective approach. However, it changes the gain profile of Er3+-doped fiber amplifiers and induces the gain difference between optical wavelengths in the C-band, significantly limiting the effective band of the dense wavelength-division multiplexed (DWDM) system. This paper is devoted to a detailed study of a cladding-pumped Er3+/Yb3+ co-doped fiber amplifier (EYDFA) through numerical simulations aiming to identify a configuration, before assembling a s…