Search results for "ddc:600"
showing 10 items of 46 documents
Preliminary thermal-hydraulic analysis of the EU-DEMO Helium-Cooled Pebble Bed fusion reactor by using the RELAP5-3D system code
2021
Abstract In the frame of the activities promoted and encouraged by the EUROfusion Consortium aimed at developing the EU-DEMO fusion reactor, great emphasis has been placed at a very early stage of the design to incorporate the provisions needed to improve the overall plant safety and reliability performances as well as to analyse possible mitigation actions. In this framework, the research activity has been focused on the representative and safety relevant cooling loop of the Helium Cooled Pebble Bed (HCPB) Breeding Blanket (BB) Primary Heat Transfer System (PHTS), purposely selected by the safety team, in order to assess its thermal-hydraulic behaviour during normal operational conditions …
Phase-dependent microwave response of a graphene Josephson junction
2021
Gate-tunable Josephson junctions embedded in a microwave environment provide a promising platform to in situ engineer and optimize novel superconducting quantum circuits. The key quantity for the circuit design is the phase-dependent complex admittance of the junction, which can be probed by sensing a radio frequency SQUID with a tank circuit. Here, we investigate a graphene-based Josephson junction as a prototype gate-tunable element enclosed in a SQUID loop that is inductively coupled to a superconducting resonator operating at 3 GHz. With a concise circuit model that describes the dispersive and dissipative response of the coupled system, we extract the phase-dependent junction admittanc…
Grain Boundary Wetting Phenomena in High Entropy Alloys Containing Nitrides, Carbides, Borides, Silicides, and Hydrogen: A Review
2021
This review was written during the preparation of M-era.Net full proposal “Grain boundaries in multicomponent alloys without principal component” (A.Ko., A.Ku., G.L., and E.R., application No 9345). We also acknowledge the support of the KIT-Publication Fund of the Karlsruhe Institute of Technology. The Institute of Solid State Physics, University of Latvia, as a center of excellence, has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement no. 739508, project CAMART2.
Effect of transition metals and homogeneous hydrogen producers in the hydrothermal liquefaction of sewage sludge
2022
Hydrothermal liquefaction (HTL) of sewage sludge (SS) was performed in the presence of metallic Zn, Fe and Ni to investigate their effect on the performances of the process in terms of product yields and quality. Experiments were performed in subcritical water at 350 ◦C for 10 min using each metal individually and in the presence of homogenous hydrogen producers like formic acid (FA) and KOH. Interesting results were obtained with Zn that when used alone or in the presence of KOH, increased the cumulative biocrude (BC) yields and resulted in energy recoveries (ER) higher than 100% with respect to initial energy content of the biomass, thus indicating that HTL of SS is globally endothermic. …
Systems Engineering approach in support to the breeding blanket design
2019
Abstract Nowadays the Systems Engineering (SE) methodology is applied in several fields of engineering and it represents a powerful interdisciplinary means to enable the realisation of complex systems taking into account the customer and Stakeholder´s needs. Also in the fusion community, this theme is becoming increasingly pressing and the implementation of the SE approach, from the early stage of design, is now a must. Indeed, within the framework of EUROfusion activities, SE method has been selected for capturing the system and interface requirements and for their management and verification with particular focus to the Breeding Blanket (BB) System of the European Demonstration Fusion Pow…
Layout influence on microwave performance of graphene field effect transistors
2018
The authors report on an in-depth statistical and parametrical investigation on the microwave performance of graphene FETs on sapphire substrate. The devices differ for the gate-drain/source distance and for the gate length, having kept instead the gate width constant. Microwave S -parameters have been measured for the different devices. Their results demonstrate that the cut-off frequency does not monotonically increase with the scaling of the device geometry and that it exists an optimal region in the gate-drain/source and gate-length space which maximises the microwave performance.
Graphene Field-Effect Transistors Employing Different Thin Oxide Films: A Comparative Study
2019
In this work, we report on a comparison among graphene field-effect transistors (GFETs) employing different dielectrics as gate layers to evaluate their microwave response. In particular, aluminum oxide (Al$_{2}$O$_{3}$), titanium oxide (TiO$_{2}$), and hafnium oxide (HfO$_{2}$) have been tested. GFETs have been fabricated on a single chip and a statistical analysis has been performed on a set of 24 devices for each type of oxide. Direct current and microwave measurements have been carried out on such GFETs and short circuit current gain and maximum available gain have been chosen as quality factors to evaluate their microwave performance. Our results show that all of the devices belonging …
Studies on Flat Sandwich-type Self-Powered Detectors for Flux Measurements in ITER Test Blanket Modules
2018
Neutron and gamma flux measurements in designated positions in the test blanket modules (TBM) of ITER will be important tasks during ITER’s campaigns. As part of the ongoing task on development of nuclear instrumentation for application in European ITER TBMs, experimental investigations on self-powered detectors (SPD) are undertaken. This paper reports the findings of neutron and photon irradiation tests performed with a test SPD in flat sandwich-like geometry. Whereas both neutrons and gammas can be detected with appropriate optimization of geometries, materials and sizes of the components, the present sandwich-like design is more sensitive to gammas than 14 MeV neutrons. Range of SPD curr…
Identification of blanket design points using an integrated multi-physics approach
2017
Abstract The breeding blanket (BB) is one of the key components for a fusion reactor. It is expected to sustain and remove considerable heat loads due to the heat flux coming from the plasma and the nuclear power deposited by the fusion neutrons. In the design of the BB, the engineering requirements of nuclear, material and safety kind are involved. In the European DEMO project, several efforts are dedicated to the development of an integrated simulation-design tool able to perform a multi-physics analysis, allowing the characterisation of BB design points which are consistent from the neutronic, thermal-hydraulic and thermo-mechanical point of view. Furthermore, at Karlsruhe Institute of T…
Integrated design of breeding blanket and ancillary systems related to the use of helium or water as a coolant and impact on the overall plant design
2021
Currently, for the EU DEMO, two Breeding Blankets (BBs) have been selected as potential candidates for the integration in the reactor. They are the Water Cooled Lithium Lead and the Helium Cooled Pebble Bed BB concepts. The two BB variants together with the associated ancillary systems drive the design of the overall plant. Therefore, a holistic investigation of integration issues derived by the BB and the installation of its ancillary systems has been performed. The issues related to the water activation due to the 16N and 17N isotopes and the impact on the primary heat transfer systems have been investigated providing guidelines and dedicated solution for the integration of safety devices…