Search results for "electrode"
showing 10 items of 950 documents
Room temperature electrodeposition of photoactive Cd(OH)2 nanowires
2009
Cd(OH)2 nanowires (NWs) were successfully prepared by room temperature electrogeneration of base using Cd(NO3)2 aqueous electrolyte and Anodic Alumina Membrane (AAM) as template. Cd(OH)2 films have been also deposited on tin-doped indium oxide (ITO) for comparison. SEM analysis shows high quality deposits made of closely packed nanowires (NWs) into AAM and uniform flake-like surface on ITO. XRD analysis reveals that Cd(OH)2 films on ITO are polycrystalline, while the nanowires grow along the preferential directions [100] and [110]. Photoelectrochemical measurements show that Cd(OH)2 NWs are photoactive materials with indirect and direct band gap of 2.15 and 2.75 eV, respectively. Keywords: …
Nucleant layer effect on nanocolumnar ZnO films grown by electrodeposition
2013
Different ZnO nanostructured films were electrochemically grown, using an aqueous solution based on ZnCl2, on three types of transparent conductive oxides grow on commercial ITO (In2O3:Sn)-covered glass substrates: (1) ZnO prepared by spin coating, (2) ZnO prepared by direct current magnetron sputtering, and (3) commercial ITO-covered glass substrates. Although thin, these primary oxide layers play an important role on the properties of the nanostructured films grown on top of them. Additionally, these primary oxide layers prevent direct hole combination when used in optoelectronic devices. Structural and optical characterizations were carried out by scanning electron microscopy, atomic for…
Ultra-low density metallic foams synthesized by contact glow discharge electrolysis (CGDE) for laser experiments★
2018
International audience; The goal of this work is to realize metallic foams synthesized by contact glow discharge electrolysis with specific characteristics. In this paper, we show the results of our studies, consisting in investigating parameters that influence the foams characteristics. Thus, the morphology of metallic foams is examined through scanning electron microscopy (SEM) observations with the acid nature. Moreover, the evolution of the mass and the volume of metallic foams with two experimental parameters (overvoltage and gold concentration) is also investigated. The acid nature affects the foams microscopic structure highlighted by the SEM observations, but for now no valid explan…
Electrochemical behaviour and electrical percolation in graphite-epoxy electrodes
1994
The electrochemical properties of mouldable graphite-epoxy composite electrodes have been studied as a function of graphite content. The shape of ferri-ferrocyanide voltammograms relates to the ratio of graphite and an adsorption process. The dielectric constant from spectroelectrochemical impedance measurement of this composite electrode is maximum when the proportion of graphite is ca. 60 wt%. An electrochemical equivalent circuit is proposed. The graphite-epoxy composite acts as a multi-microelectrode near this proportion.
Robustness and electrical reliability of AZO/Ag/AZO thin film after bending stress
2017
Abstract The increasing interest in thin flexible and bendable devices has led to a strong demand for mechanically robust and electrically reliable transparent electrodes. Indium doped Tin Oxide (ITO) and Aluminium doped Zinc Oxide (AZO) are among the most employed transparent conductive oxides (TCO) and their reliability on flexible substrates have thus received a great attention. However, a high flexibility is usually achieved at very low thickness, which, unfortunately, compromises the electrical conductivity. Here we report the effects of mechanical bending cycles on the electrical and optical properties of ultra thin AZO/Ag/AZO multilayers (45 nm/10 nm/45 nm) and, for comparison, of AZ…
Solid-state electrochemical characterization of emissions and authorities producing Roman brass coins
2020
[EN] The voltammetry of immobilized particles (VIMP) is applied to describe the solid state electrochemistry of brass. This methodology, which involves sampling at the nanogram level, is applied to discriminate mints/authorities producing different Roman monetary emissions covering since the Republic (88 BCE) to Domitianus (55-96 CE) Upon attachment to graphite electrodes in contact with aqueous acetate buffer at pH 4.75, well defined voltarnmetric responses were obtained centered on Cu- and Zn-localized signals whose intensity can be correlated to EMP data, being sensitive to the contents of Zn (15-30 wt.%) and Sn (0.01-1.1 wt.%). Voltammetric data, combined with ATR-FTIR and FIB-PESEM/EDS…
Exploring room-temperature transport of single-molecule magnet-based molecular spintronics devices using the magnetic tunnel junction as a device pla…
2019
A device architecture utilizing a single-molecule magnet (SMM) as a device element between two ferromagnetic electrodes may open vast opportunities to create novel molecular spintronics devices. Here, we report a method of connecting an SMM to the ferromagnetic electrodes. We utilized a nickel (Ni)–AlOx–Ni magnetic tunnel junction (MTJ) with the exposed side edges as a test bed. In the present work, we utilized an SMM with a hexanuclear [Mn6(μ3-O)2(H2N-sao)6(6-atha)2(EtOH)6] [H2N-saoH = salicylamidoxime, 6-atha = 6-acetylthiohexanoate] complex that is attached to alkane tethers terminated with thiols. These Mn-based molecules were electrochemically bonded between the two Ni electrodes of an…
Studies of the Phosphatization of Steel and its Corrosion Products
1986
The reaction of phosphoric acid with steel is a basic process in many technological procedures. A typical example is the pretreatment of steel surfaces for the application of coatings. The aim of the treatment is to clean the surface, to produce a homogeneousr tight, and smooth cover and to provide a reliable adhesion between the steel substrate and the coating. This example points out that the phase composition of the layer formed is of great interest, and that reactions with residues on the surface, such as oxides and corrosion products, have to be considered, too. The same holds for phosphate layers formed in order to modify the mechanical or corrosion behavior of steel surfaces. Because…
A simulation and experimental study of electrochemical pH control at gold interdigitated electrode arrays
2021
Abstract In electroanalysis, solution pH is a critical parameter that often needs to be tailored and controlled for the detection of particular analytes. This is most commonly performed by the addition of chemicals, such as strong acids or bases. Electrochemical in-situ pH control offers the possibility for the local adjustment of pH at the point of detection, without the need for additional reagents. Finite element analysis (FEA) simulations have been performed on interdigitated electrodes, to guide experimental design in relation to both electroanalysis and in-situ control of solution pH. No previous model exists that describes the generation of protons at an interdigitated electrode arra…
Inverse-voltammetric determination of bismuth in biomaterials with computer assisted peak evaluation
1988
The inverse-voltammetric determination of low bismuth concentrations in a 1 mol/l HCl as supporting electrolyte was investigated with regard to optimal working conditions. New and old types of mercury-drop electrodes and mercury-film electrodes were compared concerning their sensibility, selectivity and interferences. With both electrodes the determination of 0.1 μg/l to 0.01 μg/l bismuth is possible. The influence of a large excess of copper and antimony on the inverse-voltammetric determination of bismuth was studied in detail.