Search results for "electrolyte"
showing 10 items of 746 documents
MCM-41 silica effect on gel polymer electrolytes based on thermoplastic polyurethane
2012
Abstract Polymer electrolytes were prepared from thermoplastic polyurethane with addition of mixture of N-ethyl(methylether)-N-methylpyrrolidinium trifluoromethanesulfonimide (PYRA12O1TFSI) ionic liquid, lithium bis(trifluoromethanesulfoneimide) salt and propylene carbonate. MCM-41 mesoporous silica was added in proportions ranging from 5 to 20 wt.% with respect to TPU. The electrolytes were characterized by thermogravimetric analysis, differential scanning calorimetry, linear voltammetry and impedance spectroscopy. The MCM-41 addition to the system was found to improve the electrochemical stability of the membranes and to reduce the gel electrolyte/metallic Li interfacial resistance. The f…
Nafion® and polyaniline composite modification with Li and Mg ions
2019
Funding from European Union`s Horizon 2020 Research and Innovation Program project under grant agreement No 768789 is greatly acknowledged.
Facile Fabrication of Natural Polyelectrolyte-Nanoclay Composites: Halloysite Nanotubes, Nucleotides and DNA Study
2020
Complexation of biopolymers with halloysite nanotubes (HNTs) can greatly affect their applicability as materials building blocks. Here we have performed a systematic investigation of fabrication of halloysite nanotubes complexes with nucleotides and genomic DNA. The binding of DNA and various nucleotide species (polyAU, UMP Na2, ADP Na3, dATP Na, AMP, uridine, ATP Mg) by halloysite nanotubes was tested using UV-spectroscopy. The study revealed that binding of different nucleotides to the nanoclay varied but was low both in the presence and absence of MgCl2, while MgCl2 facilitated significantly the binding of longer molecules such as DNA and polyAU. Modification of the nanotubes with DNA an…
Cs0.86(NH41.14SO4Te(OH)6 in porous anodic alumina for micro fuel cell applications.
2011
Abstract Cs0.86(NH4)1.14SO4Te(OH)6 supported by anodic alumina membranes (AAMs) has been characterized for the first time in H2/O2 fuel cell. The fabricated membrane electrode assemblies are able to produce peak power densities in the range 15–30 mW cm−2 under mild conditions (room temperature, low humidity and low Pt loading) and show an increased durability with cycling with respect to previous results obtained with AAM-based fuel cell. The physico-chemical characterization of the electrolytes has been carried out through X-ray diffractometry, scanning electron microscopy and micro-raman analysis. An estimation of the composite membranes conductance under fuel cell operation has been carr…
Complexes of organometallic compounds
1966
Abstract The compounds (C2H5)2PbCl2, (C2H5)3PbCl and PbCl2 were studied by paper electrophoresis in aqueous LiCl solutions of various molarities. Determination was made of the formation of chloride complexes in which the electric charge was a function of ligand concentration in the solution. From the results of these experiments, and from a comparative examination of anion exchange data obtained in previous researches, useful information is obtained for determining the ligand concentrations relative to the preponderance of cationic, neutral and anionic complexes in the aqueous solutions. From this information it is possible to assume (C2H5)2PbCl42− and (C2H5)3PbCl32− as the fully coordinate…
Electrosynthesis of Sn-Co nanowires in alumina membranes
2010
A fabrication process of amorphous nanowires of Sn-Co alloys, based on electrodeposition into anodic alumina membranes, is described. It is shown that nanowires of tin-cobalt alloys with different compositions can be produced by varying electrodeposition time and concentration ratio of salts dissolved into the electrolytic bath. Importance of the chelating agent to produce amorphous Sn-Co alloys has also been addressed. Electrodepositions were carried out potentiostatically at -1 V versus Saturated Calomel Electrode and 60 degrees C for times ranging from 10 to 90 minutes; the atomic fraction of Co2+ in the aqueous electrolyte (Co2+/(Co2+ + Sn2+)) was varied from 0.33 to 0.67. Nanowires asp…
Nano into Micro Formulations of Tobramycin for the Treatment of Pseudomonas aeruginosa Infections in Cystic Fibrosis.
2017
Here, nano into micro formulations (NiMs) of tobramycin for the treatment of Pseudomonas aeruginosa airway infections in cystic fibrosis (CF) are described. NiMs were produced by spray drying a solution containing polymers or sugars and a nanometric polyanion–tobramcyin complex (PTC), able to achieve a prolonged antibiotic release. NiMs properties were compared to TOBIPodhaler(Novartis), the only one commercially available dry powder inhalatory formulation based on porous microparticles. Produced NiMs showed adequate characteristics for pulmonary administration, as spherical shape, micrometric size, and high cytocompatibility toward human bronchial epithelial cells. Contrarily to TOBIPodhal…
Performance of Sulfonated Poly(Vinyl Alcohol)/Graphene Oxide Polyelectrolytes for Direct Methanol Fuel Cells
2020
The use of nanotechnology along with the consideration of a functionalization and stabilization approach to poly(vinyl alcohol) (PVA) is considered useful for the preparation of cost-effective polyelectrolyte membranes. A set of nanocomposite and crosslinked membranes based on PVA/sulfosuccinic acid (SSA)/graphene oxide (GO) are prepared and analyzed as polyelectrolytes in direct methanol fuel cells (DMFCs). The crosslinking and sulfonation by the use of SSA enhances the stability and increase the proton-conducting sites in the PVA structure. The presence of GO augments the stability, remarkably decreases the methanol crossover, and enhances power density curves. An optimum value for proton…
Crosslinked chitosan/poly(vinyl alcohol)-based polyelectrolytes for proton exchange membranes
2019
[EN] The preparation polyelectrolytes based on crosslinked poly(vinyl alcohol) (PVA) and chitosan (CS) was considered as a feasible alternative to develop highly functionalised, cost-effective and eco-friendly membranes for proton exchange fuel cell technologies. CS/PVA-based membranes were combined with sulfosuccinic acid (SSA) as crosslinking and sulfonating agent, and glycerol (GL) to promote flexibility and favour their manageability. The chemical structure, the thermo-oxidative behaviour, the ethanol uptake, the electric, the proton conductivity, and the performance in direct ethanol fuel cell (DEFC) were assessed. In general, all the CS/PVA-based polyelectrolytes showed a synergetic i…
Functionalised poly (vinyl alcohol)/graphene oxide as polymer composite electrolyte membranes
2019
[EN] Crosslinked poly(vinyl alcohol) (PVA) based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells (DEFC). The membranes were functionalised by means of the addition of graphene oxide (GO) and sulfonated graphene oxide (SGO) and crosslinked with sulfosuccinic acid (SSA). The chemical structure was corroborated and suitable thermal properties were found. Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes, a significant reduction of the ethanol solution swelling and crossover was encountered, more relevant for those functionalised with SGO. In general, the composite membranes were stable under …