Search results for "electron microscopy"
showing 10 items of 706 documents
Optical modeling of nickel-base alloys oxidized in pressurized water reactor
2012
International audience; The knowledge of the aging process involved in the primary water of pressurized water reactor entails investigating a mixed growth mechanism in the corrosion of nickel-base alloys. A mixed growth induces an anionic inner oxide and a cationic diffusion parallel to a dissolution-precipitation process forms the outer zone. The in situ monitoring of the oxidation kinetics requires the modeling of the oxide layer stratification with the full knowledge of the optical constants related to each component. Here, we report the dielectric constants of the alloys 600 and 690 measured by spectroscopic ellipsometry and fitted to a Drude-Lorentz model. A robust optical stratificati…
Structure and chemical bonds in reactively sputtered black Ti–C–N–O thin films
2011
The evolution of the nanoscale structure and the chemical bonds formed in Ti–C–N–O films grown by reactive sputtering were studied as a function of the composition of the reactive atmosphere by increasing the partial pressure of an O2+N2 gas mixture from 0 up to 0.4 Pa, while that of acetylene (carbon source) was constant. The amorphisation of the films observed by transmission electron microscopy was confirmed by micro- Raman spectroscopy, but it was not the only effect associated to the increase of the O2+N2 partial pressure. The chemical environment of titanium and carbon, analysed by X-ray photoemission spectroscopy, also changes due to the higher affinity of Ti towards oxygen and nitro…
Quenching and blue shift of UV emission intensity of hydrothermally grown ZnO:Mn nanorods
2015
Abstract ZnO:Mn alloyed nanorods (Mn nominal concentration – 3–5 wt%) were synthesized by using hydrothermal process at an optimized growth temperature of 200 °C and a growth time of 3 h. The XRD, SEM and Raman, FTIR investigations reveal that ZnO:Mn (Mn – 3–5 wt%) retained hexagonal wurtzite crystal structure with nanorod morphology. The HRTEM and SAED analysis confirm the single crystalline nature of hydrothermally grown ZnO and ZnO:Mn (5 wt%) nanorods. The ZnO:Mn nanorods (Mn – 0–5 wt%) displayed optical band gap in the range 3.23–3.28 eV. The blue shift of UV emission peak (PL) from 393 (ZnO) to 386 nm and quenching of photoluminescence emission in ZnO:Mn is due to the Mn incorporation …
Near band edge and defect emissions in wurtzite Cd0.025Mg0.10Zn0.875O nanocrystals
2021
Abstract We report on near band edge and local defects emissions in Cd0·025Mg0·10Zn0·875O (CdMgZnO) nanoparticles (NPs) as a function of temperature, where a strong temperature-dependent near-infrared emission around 1.7 eV (~730 nm) has been observed. The NPs were synthesized by a modified sol-gel method and were annealed at 750 °C after growing. The crystallographic parameters have been determined by 2-dimensional synchrotron x-ray diffraction (XRD) and conventional XRD analysis, confirming their growth within the wurtzite phase with a preferred orientation along the (101) plane and an apparent crystallite size of 52.72 ± 0.18 nm. This apparent crystallite size is consistent with the near…
Optical properties of nanocrystalline-coatedY2O3:Er3+, Yb3+ obtained by mechano-chemical and combustion synthesis.
2009
International audience; Y2O3:Er3+, Yb3+ nanocrystals have been obtained by ball milling and using a combustion synthesis procedure. In both cases the nanocrystals have been successfully coated with SiO2 following the Stöber method. The average size of the as-synthesized nanoparticles has been estimated from X-ray diffraction patterns and transmission electron microscopy images. The dependence of the optical properties of these samples on synthesis procedure or dopant concentration has been investigated. Emission, excitation and lifetime measurements have been carried out. Upconversion luminescence has been detected in all samples and an enhancement of the red to green emission ratio has bee…
Ce:Y3Al5O12−Poly(methyl methacrylate) Composite for White-Light-Emitting Diodes
2014
A Ce:YAG-poly(methyl methacrylate) (PMMA) composite was prepared by using the melt compounding method. The structure and morphology were investigated by X-ray diffractometry, transmission electron microscopy, and small-angle X-ray scattering. The optical properties (emission, excitation, and fluorescence decay rate) of the composite were studied by using photoluminescence spectroscopy. The polymer–filler interactions were studied using 13C cross-polarization magic-angle spinning NMR spectroscopy (13C{1H} CP-MAS NMR). The results indicated that Ce:YAG particles are well-dispersed in the PMMA matrix without loss of their luminescence properties or significant spectral shift, thus suggesting t…
Size-filtering effects by stacking InAs/InP (001) self-assembled quantum wires into multilayers
2002
Multilayer structure containing vertically stacked InAs/InP self-assembled quantum wires have been successfully grown by molecular-beam epitaxy. The influence of the InP spacer layer thickness on the structural and optical properties of the wire superlattice has been studied by means of transmission electron microscopy and photoluminescence. The coherent propagation of the strain field in the sample with a 5-nm-thick spacer determines by a size filtering effect a good homogeneity and uniformity of the wire stacks, and hence a good optical quality. The exciton recombination dynamics in the wire superlattice cannot be related to thermal escape of carriers out to the barriers, as occurs in sin…
Local structure of gadolinium in oxyfluoride glass matrices containing SrF2 and BaF2 crystallites
2016
Abstract Gd3 + doped aluminosilicate oxyfluoride glasses and glass-ceramics containing SrF2 and BaF2 crystallites have been studied by differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and electron paramagnetic resonance (EPR) spectroscopy techniques. A pronounced EPR fine structure emerges after the heat treatment of the glass matrix. EPR spectra simulations indicate the formation of cubic, tetragonal and trigonal Gd3 + centres in the studied compositions.
Luminescence mechanisms of defective ZnO nanoparticles.
2016
ZnO nanoparticles (NPs) synthesized by pulsed laser ablation (PLAL) of a zinc plate in deionized water were investigated by time-resolved photoluminescence (PL) and complementary techniques (TEM, AFM, μRaman). HRTEM images show that PLAL produces crystalline ZnO NPs in wurtzite structure with a slightly distorted lattice parameter a. Consistently, optical spectra show the typical absorption edge of wurtzite ZnO (Eg = 3.38 eV) and the related excitonic PL peaked at 3.32 eV with a subnanosecond lifetime. ZnO NPs display a further PL peaking at 2.2 eV related to defects, which shows a power law decay kinetics. Thermal annealing in O2 and in a He atmosphere produces a reduction of the A1(LO) Ra…
Synthesis, structure and spectroscopic properties of luminescent GdVO 4 :Dy 3+ and DyVO 4 particles
2018
Part of this research was done during visit of D.J. to IFN-CNR CSMFO Lab. and FBK Photonics Unit, Povo-Trento, Italy, in the framework of the STSM (Grant No. 38223) from the project: COST Action MP 1401 Advanced Fibre Laser and Coherent Source as tools for Society, Manufacturing and Lifescience” (2014e2018). The authors from Vinca Institute of Nuclear Sciences acknowledge the financial support of the Ministry of Education, Science and Tech-nological Development of the Republic of Serbia (Project No: 45020 and 172056). L.T.N. Tran acknowledges the scholarship of the Ministry of Education and Training, Vietnam International Education Development. T. G. acknowledges the ERDF PostDoc project No…