Search results for "electron spectroscopy"

showing 10 items of 525 documents

La1-xSrxCo1-yFeyO3-delta perovskites: Preparation, characterization and solar photocatalytic activity

2015

Abstract LaCoO3 perovskites substituted by Sr at the A site and/or by Fe at the B site have been prepared by the citrate method. Characterizations by several techniques, such as specific surface area (BET method), XRD, TPR, SEM, UV–vis in DRS mode, XPS and TGA analyses, have been performed. The so prepared La1−xSrxCo1−yFeyO3−δ perovskites are semiconductor materials showing band gap energy values from 1.9 to 3.2 eV. They displayed solar photocatalytic activity for the 2-propanol degradation in gas–solid regime. The photocatalytic results suggest that the perovskites containing Fe are less active and the activity decreases by increasing the Fe content, however the presence of iron avoids the…

LantanocobaltiteMaterials scienceBand gapProcess Chemistry and TechnologyLantanocobaltites Photocatalysis Solar irradiation 2-PropanolMineralogyFe contentCatalysisCatalysisCharacterization (materials science)Solar irradiation2-PropanolPhotocatalysiX-ray photoelectron spectroscopySpecific surface areaPhotocatalysisDegradation (geology)Settore CHIM/07 - Fondamenti Chimici Delle TecnologieGeneral Environmental ScienceNuclear chemistry
researchProduct

Production and Radiochemical Separation of the Auger Electron Emitter140Nd

2000

Among the Auger electron emitters, the radiolanthanide 140Nd has some unique nuclear properties with potential for endoradiotherapeutic applications. In the present study, 140Nd was produced via the 140Ce(3He,3n) nuclear process at the FZ Julich CV28 cyclotron, irradiating CeO2 with 3He particles of 36 MeV primary energy. Yields of about 5 MBq 140Nd per microAh were experimentally obtained. Batch yields of > 100 MBq 140Nd were reached. 140Nd was separated in 75 +/- 5% radiochemical yield using a two-step process, first by extracting the bulk of the target material according to a Ce(IV)/Nd(III) separation, then by final ion exchange purification.

LanthanideCyclotronElectronsElectronlaw.inventionPhysical PhenomenalawPhysical phenomenaMedicineRadiology Nuclear Medicine and imagingNeodymiumRadioisotopesAuger electron spectroscopyRadiochemistryIon exchangebusiness.industryPhysicsRadiochemistryAuger electron emitterHematologyGeneral MedicineOncologyYield (chemistry)RadiopharmaceuticalsNuclear medicinebusinessActa Oncologica
researchProduct

Advances in Mössbauer Emission Spectroscopy

1990

After effects following nuclear transformation have been extensively studied in a large variety of matrices by Mossbauer Emission Spectroscopy (MES). The branching ratios of transient atomic charge states and energetically unstable states of the environment, excitations of electronic ligand field states and populations out of equilibrium within the electronic ground state manifold have been studied. Recent developments and also new insights and understandings of different aspects of the aftereffects of radioactive decay of57Co in semiconductors and molecular crystals are reviewed. A detailed picture of the decay process within the electronic states of the nucleogenic Fe3+ species could be o…

Ligand field theoryNuclear and High Energy PhysicsAuger electron spectroscopyPhononChemistryCondensed Matter PhysicsAtomic and Molecular Physics and OpticsNucleogenicMössbauer spectroscopyEmission spectrumPhysical and Theoretical ChemistryAtomic physicsGround stateRadioactive decayHyperfine Interactions
researchProduct

Ultrathin and nanostructured ZnO-based films for fluorescence biosensing applications

2011

The fluorescence-based sensing capability of ultrathin ZnO-SiO(2) nanoplatforms, deposited by an integrated approach of colloidal lithography and metal organic chemical vapor deposition, has been investigated upon adsorption of fluorescein-labeled albumin, used as model analyte biomolecule. The protein immobilization process after spontaneous adsorption/desorption significantly enhances the green emission of the different ZnO-based films, as evidenced by scanning confocal microscopy, corresponding to a comparable protein coverage detected by X-ray photoelectron spectroscopy. Moreover, experiments of fluorescence recovery after photobleaching evidence that the protein lateral diffusion at th…

MOCVD–colloidal lithography; Protein adsorption; Fluorescence recovery after photobleachingMaterials scienceSilicon dioxideMOCVD-colloidal lithographyZnO thin film; MOCVD-colloidal lithography; Biosensing; Protein adsorption; Fluorescence recovery after photobleachingProtein adsorptionNanotechnologyBiointerfaceBiosensing TechniquesChemical vapor depositionFluorescenceFluorescence recovery after photobleachingBiomaterialschemistry.chemical_compoundColloid and Surface ChemistryAdsorptionX-ray photoelectron spectroscopyAlbuminschemistry.chemical_classificationBiosensingBiomoleculeMOCVD–colloidal lithographyMembranes ArtificialZnO thin filmSilicon DioxideNanostructuresSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialschemistryFluoresceinZinc OxideBiosensorProtein adsorptionJournal of Colloid and Interface Science
researchProduct

Adducts of organolead(IV) and organothallium(III) chlorides with N,N′-ethylenebis(salicylideneiminato)nickel(II) and bis(β-mercaptoethylamine)nickel(…

1974

Abstract Novel 1/1 adducts of organolead(IV) and organothallium(III) chlorides with the complexes N,N′-ethylenebis(salicylideneiminato)nickel(II) and bis(β-mercaptoethylamine)nickel(II) have been synthesized. Their configurations have been investigated in the solid state by IR and electronic spectroscopy and by magnetic measurements.

Magnetic measurementsChemistryOrganic ChemistryInorganic chemistrySolid-statechemistry.chemical_elementBiochemistryElectron spectroscopyAdductInorganic ChemistryNickelPolymer chemistryMaterials ChemistryPhysical and Theoretical ChemistryJournal of Organometallic Chemistry
researchProduct

Complexes of organometallic compounds

1974

Abstract Novel 1/1 adducts have been obtained from the complex N , N ′-ethylenebis(salicylideneiminato)nickel(II) (NiSalen) with di- and mono-organotin(IV) chlorides, and their solid state configuration investigated by Mossbauer , IR and electronic spectroscopy and magnetic measurements. In coordinated NiSalen the square planar structure is maintained around Ni II , and the coordination to tin involves three-coordinate phenolic oxygens. The environment of Sn IV is judged to be octahedral in both types of compounds. A trans -R 2 , cis -Cl 2 configuration is advanced for R 2 SnCl 2 NiSalen.

Magnetic measurementsChemistryOrganic ChemistryInorganic chemistrychemistry.chemical_elementBiochemistryMedicinal chemistryElectron spectroscopyAdductInorganic ChemistryNickelOctahedronMössbauer spectroscopyMaterials ChemistryPhysical and Theoretical ChemistryTinGroup 2 organometallic chemistryJournal of Organometallic Chemistry
researchProduct

Magnetic interface formation at Fe/Cr/Fe(100)

1997

Photoemission magnetic dichroism of Fe and Cr 3p core levels was employed to investigate the magnetic order at the Fe/Cr/Fe(100) interface. For submonolayer and monolayer Fe coverages on Cr(100) the interface system appears magnetically frustrated, with no net magnetization along the parallel (antiparallel) direction of the substrate magnetization. The analysis of the Fe 3p photoemission dichroism allows to conclude that, at these low coverages, Fe is magnetically ordered but along an axis lying at 90° from the substrate Fe(100) magnetization, favoring the interpretation of biquadratic coupling between the ultrathin iron overlayer and the bulk iron substrate, across the Cr interlayer.

MagnetismAnalytical chemistrychemistry.chemical_elementSurfaces and InterfacesDichroismCondensed Matter PhysicsSurfaces Coatings and FilmsOverlayerMagnetizationCrystallographyChromiumTransition metalchemistryX-ray photoelectron spectroscopyMonolayerMaterials Chemistry
researchProduct

Cu-substituted lanthanum ferrite perovskites: Preparation, characterization and photocatalytic activity in gas-solid regime under simulated solar lig…

2016

Lanthanum orthoferrites LaFeO3 nanopowders doped with 20 mol% of Sr and 0-10-20 mol% of Cu were prepared by citrate auto-combustion synthesis and investigated in terms of crystal structure, morphology, surface area and optical properties by using several characterization techniques. The band gap energy values were found to range from 2.35 eV for LaFeO3 to 1.86 eV for the samples with the highest content of copper, this trend reflects the decrease of the particle size. All powders showed photocurrent response, the highest photocurrent was obtained for undoped orthoferrite calcined at 600°C. Their physical-chemical properties were related to photoelectrochemical behaviour. The the position of…

Materials Chemistry2506 Metals and AlloysMaterials scienceCu(II) substituted LaFeO3; LaFeO3; Perovskite; Photocatalysis;Scanning electron microscopeLanthanum ferrite perovskites photocatalysis solar irradiationMineralogychemistry.chemical_element02 engineering and technology010402 general chemistryPerovskite01 natural sciencessymbols.namesakePhotocatalysiX-ray photoelectron spectroscopyMaterials ChemistryLanthanumMechanics of MaterialPhotocatalysisPhotocurrentMechanical EngineeringMetals and AlloysCu(II) substituted LaFeO3; LaFeO3; Perovskite; Photocatalysis; Mechanical Engineering; Mechanics of Materials; Materials Chemistry2506 Metals and Alloys; 2506Cu(II) substituted LaFeO3021001 nanoscience & nanotechnologyCopper0104 chemical scienceschemistryMechanics of MaterialsPhotocatalysissymbolsDiffuse reflectionSettore CHIM/07 - Fondamenti Chimici Delle Tecnologie25060210 nano-technologyRaman spectroscopyLaFeO3Nuclear chemistry
researchProduct

Effects of heat treatments on the properties of copper phthalocyanine films deposited by glow-discharge-induced sublimation

2006

Copper phthalocyanine films have been deposited by glow-discharge-induced sublimation. The films have undergone postdeposition heat treatments in air at 250 and 290 °C for different times, ranging from 30 min to 14 h. The properties of as-deposited and heated films have been investigated by different techniques in order to determine the effects of heat treatments on the film properties. Fourier transform infrared analysis and UV−visible optical absorption analysis point out a gradual evolution of the film structure from a mixture of α and β polymorphs to the only β polymorph in the sample heated at 290 °C for 14 h. A pronounced decrease of carbon and nitrogen atomic percentages against an o…

Materials Chemistry2506 Metals and Alloysgas sensingGlow dischargeMaterials sciencephthalocyanine EXAFSIon beamAbsorption spectroscopyGeneral Chemical EngineeringAnalytical chemistryAmbientaleGeneral ChemistryRutherford backscattering spectrometryNO2 detectionx-ray absorption spectroscpy; gas sensing; thin films; NO2 detectionX-ray photoelectron spectroscopythin filmsMaterials Chemistry2506 Metals and Alloys; Materials Science (all)Nuclear reaction analysisMaterials Chemistryx-ray absorption spectroscpySublimation (phase transition)Materials Science (all)Thin film
researchProduct

Novel TiO2-WO3 self-ordered nanotubes used as photoanodes: Influence of Na2WO4 and H2O2 concentration during electrodeposition

2021

[EN] Hybrid TiO2-WO3 nanostructures has been synthesized by electrochemical anodization under controlled hydrodynamic conditions followed by electrodeposition in the presence of different contents of Na2WO4 (5, 15 and 25 mM) and H2O2 (20, 30 and 40 mM). The influence of the electrolyte used for electrodeposition on the morphology, crystalline structure and photoelectrochemical response for water splitting has been evaluated through Field Emission Electronic Microscopy, High-Resolution Transmission Electron Microscopy, Confocal Raman Spectroscopy, Grazing Incidence X Ray Diffraction, X-Ray Photoelectron Spectroscopy, Atomic Force microscopy and photocurrent versus potential measurements. Add…

Materials science02 engineering and technologyElectrolyte010402 general chemistry01 natural sciencesINGENIERIA QUIMICAX-ray photoelectron spectroscopyElectrodepositionMaterials ChemistryTiO2-WO3 nanostructuresWater splittingPhotocurrentAnodizingHeterojunctionSurfaces and InterfacesGeneral Chemistry021001 nanoscience & nanotechnologyCondensed Matter Physics0104 chemical sciencesSurfaces Coatings and FilmsField electron emissionChemical engineeringTransmission electron microscopyWater splittingPhotoelectrocatalysisAnodization0210 nano-technology
researchProduct